Allroad coil conversion

[Abonce13]

Any one know what parts i need from the a6 to convert to coils i got the arnott conversion right now so dont know if i already have some of the stuff


Sent from my iPhone using Audizine mobile app

[glennda5id]

The Arnott conversion is a direct swap in so it won't be of any use. At a minimum you need the front top hats from the A6.

Ideally you should also get the lower control arms (which are shorter) and uprights. Then you should remove the Allroad spacers in the front.

[Abonce13]

What difference does it make to have the shorter arms and uprights


Sent from my iPhone using Audizine mobile app

[glennda5id]

You need the arms and uprights to get reasonable camber in the front.

With the lowering effect of the A6 springs on the Allroad suspension you will get a lot of negative camber up front which is not adjustable. Camber is adjustable in the rear so that can be dialed in.

[Abonce13]

Ok thanks for the input ill probably look into adjustable upper control arms


Sent from my iPhone using Audizine mobile app