Windshield washer

[juicegonzalez93]

On my audi i hold the windshield washer but it doesn't spray anything. . Could it be the motor?

Sent from my SM-G900V using Tapatalk

[imnuts]

Could be the pump, fuse, or wiring. You did verify that there is fluid in the tank though right?

Sent from my DROID Turbo 2

[customa4]

Fuse #37. Upgrade it to a 30a fuse.

[juicegonzalez93]

Could be the pump, fuse, or wiring. You did verify that there is fluid in the tank though right?

Sent from my DROID Turbo 2

Yes there is plenty of fluid XD . . If the pump is working can you hear it or a sign that its working

Sent from my SM-G900V using Tapatalk

[juicegonzalez93]

Fuse #37. Upgrade it to a 30a fuse.

Wouldn't it affect the wiring? Just a thought?

Sent from my SM-G900V using Tapatalk

[customa4]

There was a TSB from Audi that the fuse was not strong enough. It needs to be upgraded. I've had a 30a fuse in mine for 6 years, no problems. You'll be fine.

Click

[juicegonzalez93]

There was a TSB from Audi that the fuse was not strong enough. It needs to be upgraded. I've had a 30a fuse in mine for 6 years, no problems. You'll be fine.

Click

Hmmm okay I'll replace that, hope it works and thank you

Sent from my SM-G900V using Tapatalk

[customa4]

Not a problem. Report back and let us know!

[tHatOne guY]

On my audi i hold the windshield washer but it doesn't spray anything. . Could it be the motor?

Sent from my SM-G900V using Tapatalk

Had the exact same issue pump made noise, fuse was good and a full res but no washer fluid out of the jets. After a new pump was all good again.

[gunde]

On my car, the tube that brings fluid from the tank to the washer jets was ripped where it comes out of the front fender, right beside the ecu box.

[Northern_B6]

On my car, the tube that brings fluid from the tank to the washer jets was ripped where it comes out of the front fender, right beside the ecu box.

This. Mine ripped in the exact same spot.

Check this if it's not your fuse. Also replacing the pump is very cheap and easy to do.

[juicegonzalez93]

Not a problem. Report back and let us know!

Thats the fuse diagram. . It had a 30 fuse already i guess someone replaced it, i checked it, and it wasn't blown. I tried and still i didn't get any spray going. .

Sent from my SM-G900V using Tapatalk

[customa4]

Sounds like your problem might be elsewhere. Did you swap it just to check?

[juicegonzalez93]

Sounds like your problem might be elsewhere. Did you swap it just to check?

You mean put in a 25 or if i swap it to another 30 fuse?

Sent from my SM-G900V using Tapatalk

[customa4]

Yea, swap it for another 30a. The fuse could still be blown and pass a visual inspection. I'm not saying it is but it's worth a check.

[juicegonzalez93]

Yeah i did that already and still nothing. . Im guessing the pump went bad

Sent from my SM-G900V using Tapatalk

[customa4]

Yea, it's possible.

[Northern_B6]

Yeah i did that already and still nothing. . Im guessing the pump went bad

Sent from my SM-G900V using Tapatalk

My old pump would whine pretty loud and barely worked.

New pump is whisper quiet and works great.