:: ECS Tuning :: ECS Street Shield Aluminum Skid Plate | Audi B7 A4 2.0T

[ECS Tuning-Audi]

The belly pans provided for modern Audi’s have always appeared to be cost-cutting parts.
Many enthusiasts have chosen to run their cars without this protective cover entirely. This decision, however, ignores the unfortunate reality that the belly pan protects several critical engine and drivetrain components.

ECS has a much more sensible solution – The Street Shield Skid Plate features corrosion resistant, 4mm thick 5052 aluminum, offering complete engine undercarriage protection.


Ultimate Protection

Click HERE to order or for more information



Fits: Audi
Audi B7 A4 2.0T 2005.5-2008
*Does not fit front wheel drive models with CVT transmission

Be sure to check out our -----> Installation PDF <-----

Let me know if you have any questions.

Jason

[00_Bora]

Your website says it fits FWD vehicles....

https://www.ecstuning.com/ES2845868/

[ECS Tuning-Audi]

Your website says it fits FWD vehicles....

https://www.ecstuning.com/ES2845868/

It will fit FWD vehicles with a manual transmission. We don't have a drop down on our site to select what transmission you have, which is why we outlined it with a note that says "*Does not fit front wheel drive models with CVT transmission"

Thanks for the concern though.

Jason

[reno808]

Any discounts? Thinking about buy one

[ECS Tuning-Audi]

Any discounts? Thinking about buy one

We actually do not offer any specific discounts as we try to price our products as competitive as possible so everyone can take advantage of the same savings.

Jason

[tater5387]

How hard is it take down to do an oil change?

[ECS Tuning-Audi]

How hard is it take down to do an oil change?

No different than if you were to take down your factory belly pan. It only weighs 14lbs.

Jason

[adam044]

How hard is it take down to do an oil change?

When I had my Panzer plate on my B5 I found it easier to take that down then the plastic piece of shit Audi gives you. If this bellypan on my B7 ever gets destroyed I'd get another one for sure.

[B72011]

Looks cool, but who has $200+ to just bolt to the bottom of their car?
Maybe someone can buy one and make a template out of it for AZ users enjoyment.
Sorry, just kidding.

[adam044]

Looks cool, but who has $200+ to just bolt to the bottom of their car?
Maybe someone can buy one and make a template out of it for AZ users enjoyment.
Sorry, just kidding.

I only got the Panzer one because an OEM one was $100+, so I bought one for about $100 more because I knew it would last the life of the car and I would not have to worry about the cheap plastic one breaking again.

[B72011]

When you look at it like that and if you are going to buy a new one. I would think a used one is the way to go----for like $50 or so.

[audihere06]

How hard is it take down to do an oil change?

I got one for Christmas, taking it off is easy. Without a lift, putting it back on can be difficult sometimes.


Sent from my iPhone using Tapatalk

[DannyDeez]

I bought one for my car right around the holidays. It might have been slightly discounted due to black friday sales. Seems like a nice quality piece.