2-piece headlight to 1 piece conversion

[The Overclocker]

Hi guys i just need the diagram on the colors/ specs

So i can cut my cars wireing , and solder the new connector in for good , i cannot find this information

Found multiple forums about this subject but none of them had the diagram telling me what wire is what

Please if you have this info , help a brother out

Got a accident .. Reason for the swap


Sent from my iPhone using Tapatalk

[The Overclocker]

Sent from my iPhone using Tapatalk

[The Overclocker]

Anyone ?! ...


Sent from my iPhone using Tapatalk

[Wrath And Tears]

Hate to be that guy but there are dozens of threads with the wiring diagrams, a simple google search will answer your questions.

[Turbo_B5]

Hate to be that guy but there are dozens of threads with the wiring diagrams, a simple google search will answer your questions.

this. you could even just look at the cars harness and figure it out.

[MarcRogers]

I did the one piece conversion the wiring was really easy but the only thing different is that I installed ballast and HIDs. It was really easy but like I said i did an HID kit. The only thing I can say is go to a local parts store and get yourself a Haynes manual they have every wiring diagram you will need.


Sent from my iPhone using Tapatalk

[Turbo_B5]

I did the one piece conversion the wiring was really easy but the only thing different is that I installed ballast and HIDs. It was really easy but like I said i did an HID kit. The only thing I can say is go to a local parts store and get yourself a Haynes manual they have every wiring diagram you will need.


Sent from my iPhone using Tapatalk

its only THREE wires/side. You can do this all by looking at the wire colours.

[The Overclocker]

I did the one piece conversion the wiring was really easy but the only thing different is that I installed ballast and HIDs. It was really easy but like I said i did an HID kit. The only thing I can say is go to a local parts store and get yourself a Haynes manual they have every wiring diagram you will need.


Sent from my iPhone using Tapatalk

Im doing the same , but lucky me , i found micro ballasts , they actully fit i side the headlight ! So i get that oem look but when it breaks it cost me 25$ usd and have my self a new hid kit !




Sent from my iPhone using Tapatalk

[The Overclocker]

I just wanted to have it easy for me since i still have a lot of work to do ..


Sent from my iPhone using Tapatalk

[seanf86]

I did this swap, I'm pretty sure the colors are the same, you just match the colors up on the pigtail of your 1 piece headlight connector to the wires in the car.

[The Overclocker]

Wow ok... All the colors where the same , this was soo easy omgg ... The white wire with green tracer , i took that to power my 20" Baja Led light bar ( installing it in the bumper grill ), should be sweet !!

Wireing is done , now need to cut the fender ! , what did you guys use ?

Thank you


Sent from my iPhone using Tapatalk

[demonmk2]

Dremel tool
Which one pc headlights did you get?
And post pics of that led setup..

[The Overclocker]

Took my milwaukee m12 hacksaw , just insane , took me 10 min of preparing, 1 min to cut each side

Everything is installed looks ok

how do you take out a burnt coner light bulb ?! Need to change both bulbs

Baja light bar installed !


Sent from my iPhone using Tapatalk

[The Overclocker]

Sent from my iPhone using Tapatalk

[The Overclocker]

The hood has a hood protector , all cracked and melted , any ideal how to remove it ?

Heat gun & zippo fuel ?

The grill is being painted black in my garage

The bumper is shit but a little better then what i had if i hide that front with euro license plate




Sent from my iPhone using Tapatalk

[Nollywood]

Merde! I personally would get rid of those LED strips / bars. Too much going on at the front of your car.

[The Overclocker]

Hell noo ! Its awesome ! Next time someone cuts my. Off at night ...


Sent from my iPhone using Tapatalk

[Turbo_B5]

The hood has a hood protector , all cracked and melted , any ideal how to remove it ?

Heat gun & zippo fuel ?

The grill is being painted black in my garage

The bumper is shit but a little better then what i had if i hide that front with euro license plate




Sent from my iPhone using Tapatalk

IIRC I used a hair drier and goo gone.as recommended by my auto body repair neighbour.