Belly Pan Mounting Hardware - Need Help Figuring out What Fasteners Go Through Bumper

[Ballzo]

My car has been missing these forever. I'd like to finally figure out which fastener is used to go through the front bumper and into the belly pan. I just can't seem to figure out which one it requires or identify it from a parts diagram. Anyone know?

[new2s5]

Try Ebay. I ordered a set of BMW belly pan attaching hardware kit (that are the same as Audi). Sorry don't have the link.

[AaronNY]

It's a 1/4 turn style screw with a flat head end. Same screw as the 3 in the rear middle right behind engine

Sent from my SAMSUNG-SM-N910A using Tapatalk

[G0to60]

Here's a thread I found that shows what goes where. I bought my hardware set on ECS a couple of years ago.

http://www.audiworld.com/forums/audi...tions-2053566/

[Ballzo]

I've tried to get those 1/4 screws in there and they don't want to go unless the clip is messed up somehow and keeping it from going in. I wonder if its that torx in the pic above?