0-60 personal best

[brad281]

Just pull a 3.87 second 0 to 60 mph run in a 2013 Q5 3.0T APR Stage 2+. Timed by my P3 gauge with an Intake air temperature of 56 degrees Fahrenheit at close to sea level.

[IMG]

Sent from my SM-G920V using Tapatalk

[JayCar]

CONGRATS!!!
Holy smokes.. that's bests my 3.90... I LOVE the SQ... I'm on a quest now. I have to at least tie that.. hahaha

Any other mods? What launch/shift did you use?

There's an SQ5 0-60 thread. Post this in there! :-)

[brad281]

CONGRATS!!!
Holy smokes.. that's bests my 3.90... I LOVE the SQ... I'm on a quest now. I have to at least tie that.. hahaha

Any other mods? What launch/shift did you use?

There's an SQ5 0-60 thread. Post this in there! :-)

Thank you and will do.

APR Carbonio stage 1 and 2 intake, AWE touring exhaust, and believe it or not I shaved a couple tenths swapping the stock wheels for Vossens (same diameter and tires.) I lowered the car with H&R springs, Bilstein shocks, Eurocode front and rear sway bars and end links, Alu Kreuz, 034 motorsports transmission spacer.

Sent from my SM-G920V using Tapatalk

[brad281]

CONGRATS!!!
Holy smokes.. that's bests my 3.90... I LOVE the SQ... I'm on a quest now. I have to at least tie that.. hahaha

Any other mods? What launch/shift did you use?

There's an SQ5 0-60 thread. Post this in there! :-)

For launch, I disabled traction control and left the transmission in S mode. Foot on the brake, full throttle and immediate release of brake. The ZF shifts a lot harder when you use this method.

Sent from my SM-G920V using Tapatalk

[q5 dave]

holy crap that is quick

howd you measure the intake air temp?

[brad281]

holy crap that is quick

howd you measure the intake air temp?

The P3 gauge has reads that too.

Sent from my SM-G920V using Tapatalk

[q5 dave]

The P3 gauge has reads that too.

Mine doesn't read it

[brad281]

Mine doesn't read it

When you scroll through does it have an option for air temp?

Sent from my SM-G920V using Tapatalk

[q5 dave]

it does but last i remember it showed up blank "---". do I need to make the other connections (not just OBD2?)

[QUBE5]

Congrats! Damn that's quick.

I wonder what your 1/4 mile time would be. Do you have any plans to hit a drag strip in the near future?

[JayCar]

For launch, I disabled traction control and left the transmission in S mode. Foot on the brake, full throttle and immediate release of brake. The ZF shifts a lot harder when you use this method.

Sent from my SM-G920V using Tapatalk

That's how I usually do it as well. It shifts like a monster. lol

[JayCar]

it does but last i remember it showed up blank "---". do I need to make the other connections (not just OBD2?)

Mine doesn't display it either. Just says 0°

[brad281]

Mine doesn't display it either. Just says 0°

Change the configure setting to car 3. Mine didn't work until I did that.

Sent from my SM-G920V using Tapatalk

[JayCar]

Change the configure setting to car 3. Mine didn't work until I did that.

Sent from my SM-G920V using Tapatalk

Perfect. Thanks for the info.

[brad281]

Perfect. Thanks for the info.

You're welcome

Sent from my SM-G920V using Tapatalk

[brad281]

That's how I usually do it as well. It shifts like a monster. lol

Does yours shift hard every time you use this method?

Sent from my SM-G920V using Tapatalk

[LINDW4LL]

holy crap that is quick

Keep in mind that any decline can help quite a bit when comparing these!

[Mops@Nemesis]

On heavy wheels too. I'd love to know the numbers on some 21-22lbs wheels.

[JayCar]

Does yours shift hard every time you use this method?

Sent from my SM-G920V using Tapatalk

Heck yes it does, shifts like a mad man. The front end pulls up too. It's pretty crazy.

On heavy wheels too. I'd love to know the numbers on some 21-22lbs wheels.

Me too. I was thinking of getting some OE RS6 replicas in 21" x 9.5 to stay with the OE look (I think Audi nailed it on this one), but and wondering about weight/rotating mass now. I need to drop you a PM anyway MOPs about pricing on something.

[brad281]

On heavy wheels too. I'd love to know the numbers on some 21-22lbs wheels.

The Vossens are lighter than stock by quite a bit.

Sent from my SM-G920V using Tapatalk

[brad281]

Keep in mind that any decline can help quite a bit when comparing these!

Flat road

Sent from my SM-G920V using Tapatalk

[brad281]

Congrats! Damn that's quick.

I wonder what your 1/4 mile time would be. Do you have any plans to hit a drag strip in the near future?

I'm gonna run it soon. Hoping for mid to low 12's

Sent from my SM-G920V using Tapatalk

[brad281]

Heck yes it does, shifts like a mad man. The front end pulls up too. It's pretty crazy.




Me too. I was thinking of getting some OE RS6 replicas in 21" x 9.5 to stay with the OE look (I think Audi nailed it on this one), but and wondering about weight/rotating mass now. I need to drop you a PM anyway MOPs about pricing on something.

Sometimes it does not work on mine. It's odd.

Sent from my SM-G920V using Tapatalk

[S-Fore]

With the right supporting mods, conditions and launch, Stg2 SQ's should be able to break 11's pretty consistently I would think.

I'm gonna run it soon. Hoping for mid to low 12's

Sent from my SM-G920V using Tapatalk

[brad281]

With the right supporting mods, conditions and launch, Stg2 SQ's should be able to break 11's pretty consistently I would think.

Mine is a Q5. A touch less power at stage 2+ than the SQ, transmission shifts at a lower rpm, and I believe the final drive ratio in some SQ5's is lower. Not 100% on that last one.

Sent from my SM-G920V using Tapatalk

[Mops@Nemesis]

Happy to assist, Jay

The Vossens are lighter than stock by quite a bit.

Sent from my SM-G920V using Tapatalk

Which model, and what specs? Really nice job.

[brad281]

Happy to assist, Jay



Which model, and what specs? Really nice job.

20x9.5 VFS1's

Sent from my SM-G920V using Tapatalk

[Mops@Nemesis]

20x9.5 VFS1's

Sent from my SM-G920V using Tapatalk

What is the weight? No more than 25lbs I'd guess.


Mops on the move

[brad281]

What is the weight? No more than 25lbs I'd guess.


Mops on the move

I'm not sure, but I know they are lighter than the stick wheels.

Sent from my SM-G920V using Tapatalk

[Mops@Nemesis]

I'm not sure, but I know they are lighter than the stick wheels.

Sent from my SM-G920V using Tapatalk

Just read closer to 24lbs actually. Not bad at all!

[brad281]

Just read closer to 24lbs actually. Not bad at all!

Thanks for looking it up Mops!

Sent from my SM-G920V using Tapatalk

[brad281]

Sent from my SM-G920V using Tapatalk

[Mops@Nemesis]

Thanks for looking it up Mops!

Sent from my SM-G920V using Tapatalk

For sure!

[Silverarrow240]

P3 is cool!!!! Those times are amazing... Q 3.0 from a dig is quick...

Mops did you get my text? :)

[Mops@Nemesis]

P3 is cool!!!! Those times are amazing... Q 3.0 from a dig is quick...

Mops did you get my text? :)

I did not! Nude pics?

[stereojorge]

Sent from my iPhone using Tapatalk

[brad281]

CONGRATS!!!
Holy smokes.. that's bests my 3.90... I LOVE the SQ... I'm on a quest now. I have to at least tie that.. hahaha

Any other mods? What launch/shift did you use?

There's an SQ5 0-60 thread. Post this in there! :-)

Mine is a Q5, btw.

Sent from my SM-G920V using Tapatalk

[q5 dave]

Change the configure setting to car 3. Mine didn't work until I did that.

Sent from my SM-G920V using Tapatalk

Sent from my SM-G920V using Tapatalk

Thanks! Looks great🏻


Sent from my iPhone using Tapatalk

[Silverarrow240]

I did not! Nude pics?

Def could be... But it was p3 related

Nude pics sent... And a request for a P3 quote...

[rgvsq5]

Nice! Best I have gotten so far is 4.03, also measured with P3 gauge. Same method as you, but shifted to M after the 1-2 shift and manually shifted at 6900rpm. You can run out 2nd gear to 60mph if you do it manually. That was the best run and the only run I've ever done. I'm sure I might be able to get that number down if I tried a couple more times. :D