OFFICIAL B9 A4 Wheel Gallery

[4 Ring Loyalist]

I'm running 20x9, ET25 with 255/30 and it will rub unless you have camber maxed out in the rear at -2.5. I tried 245 width tires, but they just didn't look right.

255/35 front 275/30 rear....no rub

Sent from my SM-G955U using Audizine mobile app

[OWER]

20x9 et 46 a8 wheels pirelli pzero 245-30-20 tires kw v3 coilover

D6603 cihazımdan Tapatalk kullanılarak gönderildi

[Mr. Mister]

Emmanuele design springs + Weds Sa55m 19x8 et 42 (with ECS tuning spacers 12.5 mm and 15 mm) Michelin Pilot Super Sport 245-35-19

Zoinks, Scoob!

Is that Matador Red, or custom?

[RiCHV382]

20x9 et 46 a8 wheels pirelli pzero 245-30-20 tires kw v3 coilover

D6603 cihazımdan Tapatalk kullanılarak gönderildi

I love those wheels, Classic.

[OWER]

I love those wheels, Classic.

Thank you

D6603 cihazımdan Tapatalk kullanılarak gönderildi

[lexsynergy]

Im looking for some feedback before i make a big purchase on a set of wheels and tires. After tons of researching i sold on a ser of 20x10 offset at +40 with a 255/30 tire with a mild stretch since im lowered on 034 springs. I know 20s are big and 10 width isn’t recommended. However im just looking for a flush look with deep concave without any rubbing. Im willing to sacrifice ride quality some. Has anyone tried this setup yet. I see one guy on here with a set of niche 20x10 however not sure if he is lowered or not as he runs 265/30 tires

[Kolbaskin]

Im looking for some feedback before i make a big purchase on a set of wheels and tires. After tons of researching i sold on a ser of 20x10 offset at +40 with a 255/30 tire with a mild stretch since im lowered on 034 springs. I know 20s are big and 10 width isn’t recommended. However im just looking for a flush look with deep concave without any rubbing. Im willing to sacrifice ride quality some. Has anyone tried this setup yet. I see one guy on here with a set of niche 20x10 however not sure if he is lowered or not as he runs 265/30 tires

Hi
A4 lowered on H&R
10J really wide for A4 with minmum clearance to fenders and suspension

[lexsynergy]

Hi
A4 lowered on H&R
10J really wide for A4 with minmum clearance to fenders and suspension

what tire size and offset do you run?

[Kolbaskin]

what tire size and offset do you run?

r20 10j et40
Hankooks 265/30

[lexsynergy]

r20 10j et40
Hankooks 265/30

ok, thanks.. do u rub much and are you lowered?

[4 Ring Loyalist]

ok, thanks.. do u rub much and are you lowered?

I have a similar setup....255/30/20 f in 20x9 and rear 275/30/20 on 20x10.5. h&r coilovers fronts are lower than my rear for mean look in my opinion....however no rub.

Sent from my SM-G955U using Audizine mobile app

[christerbaero]

My 2018 quattro with ESR SR06 19x9,5 and airride (Y)

[Durwin@TAG]

My 2018 quattro with ESR SR06 19x9,5 and airride (Y)

Looking really good!

[Ras_lion]

My 2018 quattro with ESR SR06 19x9,5 and airride (Y)

mehn, wagons all the way !!!!!

[Vorsteiner_Info]

19" x 9.5" V-FF 101s in Carbon Graphite

[R8Ready]

Anyone have pictures of this set up

19x9 245/35/19 33ET?

I'm scared this will pop out of the fender too much.

My goal is to get S5 rotors rims and lower it on KW H.A.S kit.

Anyone know if this will work

[cheewy16]

Anyone have pictures of this set up

19x9 245/35/19 33ET?

I'm scared this will pop out of the fender too much.

My goal is to get S5 rotors rims and lower it on KW H.A.S kit.

Anyone know if this will work

http://www.audizine.com/forum/showth...oto-Log/page20
Check out post 786. U will not poke out past fender. At stock height, it’s basically flush, esp with stock 245 tires.

[Fantasiamon]

My 2018 quattro with ESR SR06 19x9,5 and airride (Y)

Beautiful.


Sent from my iPhone using Tapatalk

[R8Ready]

Thanks buddy. Just purchased a set of S5.

2 rims have minor curb rash so I'm wondering if I should change the color to black or more of a darker grey titinium.

I have a glacier white A4 hmmm

[osugsxr]

have a 2017 a4, looking for a new set of wheels.

found a set of rs replica black rotor
19x8.5
ET35
245/40/19 Michelin Pilot Sport AS3’s with 70% tread

Absolutely NO curb rash.

5x112 bolt pattern
seller said they were ebay replicas from california. Trying to be under $1300 total with tires and wheels, looking for a black or dark grey wheel style.

at $500 obo thoughts?

[cheewy16]

245/40/19 would be the wrong tire size for our car in 19s. You need 245/35 or can run 255/35.

[osugsxr]

okay ill pass on that set up, currently have oem 17" . Would like either an 18 or 19" black / gray color at a good price for everything.

[Chris-H]

BCForged HC053 20x10.5 ET35, Florett Silver Centers, Custom Accuair Setup
(shameless plug, they are for sale)

[Ras_lion]

wickedly Handsome !!!!!!. working on mine now. lovely setup

[OWER]

BCForged HC053 20x10.5 ET35, Florett Silver Centers, Custom Accuair Setup
(shameless plug, they are [url="http://www.audizine.com/forum/showthread.php/801221-20x10-5-ET35-BC-Forged-HC053-Florett-Silver-(Southern-NH)"]for sale)

awesome

D6603 cihazımdan Tapatalk kullanılarak gönderildi

[Tech0515]

Hi All,

Can't seem to find a clear answer on this one. Looking at the Stance SC-7 wheels. Front: 20x8.5 offest 27 & Rear: 20x10 offset 35.

They recommended 255/30s and I was looking at the 255/35s but they said it would might rub on the front. Can anyone confirm? Also, any comments on the offset. I want them to be flush with the fendors and the pics they have show this. Am I going to get the look I want? Right now I'm not lowered. Also looking for as much wheel well fill as possible.

[Tech0515]

Hi All,

Can't seem to find a clear answer on this one. Looking at the Stance SC-7 wheels. Front: 20x8.5 offest 27 & Rear: 20x10 offset 35.

They recommended 255/30s and I was looking at the 255/35s but they said it would might rub on the front. Can anyone confirm? Also, any comments on the offset. I want them to be flush with the fendors and the pics they have show this. Am I going to get the look I want? Right now I'm not lowered. Also looking for as much wheel well fill as possible.

These are the one I'm looking at. Maybe I'll lower later to get a similar look.

[RiCHV382]

These are the one I'm looking at. Maybe I'll lower later to get a similar look.

I’m pretty sure the stance sc7 wheels have been discontinued. I had a lot of trouble getting ahold of a set when I got mine. Definitely going to need to lower you’re car if you are going to run 20s otherwise it will not look right.

IMG_3347.jpg


Sent from my iPhone using Audizine

[Tech0515]

I’m pretty sure the stance sc7 wheels have been discontinued. I had a lot of trouble getting ahold of a set when I got mine. Definitely going to need to lower you’re car if you are going to run 20s otherwise it will not look right.

IMG_3347.jpg


Sent from my iPhone using Audizine

Yea. They're discontinued but there is a shop near me that has a set left for a good price. (Only isssue if If i mess one up, I need a whole new set). The back being 10s, I know lowering it would be fine. Will the front being 8.5 and 27 offset being ok lowered, no rubbing. From my understandign it would push it out an inch so I'm thinking it would be ok.

Any opinion on how the 20s ride for a daily commute. I love the look (enough over the 19s) to go that route if the ride wont be a killer on this car. Used to having big rims but this is my first Audi. Also will be my first time lowering a car. Looking at H&R Springs. Any opinion on those.

[Tech0515]

W

I’m pretty sure the stance sc7 wheels have been discontinued. I had a lot of trouble getting ahold of a set when I got mine. Definitely going to need to lower you’re car if you are going to run 20s otherwise it will not look right.

IMG_3347.jpg


Sent from my iPhone using Audizine

What is the setup/offset of yours? Are they staggered?

[RiCHV382]

W

What is the setup/offset of yours? Are they staggered?

Is you’re car Quattro? If it is you cannot run a staggered set up in those numbers. The front and rear have to be within 3% of each other to not mess up the diff. I ran 20x10 et square but I machined the wheels to et 38. I ran 245/30 tires. It was a comfortable set up for me but that’s not a lot of tire.


Sent from my iPhone using Audizine

[Tech0515]

Is you’re car Quattro? If it is you cannot run a staggered set up in those numbers. The front and rear have to be within 3% of each other to not mess up the diff. I ran 20x10 et square but I machined the wheels to et 38. I ran 245/30 tires. It was a comfortable set up for me but that’s not a lot of tire.


Sent from my iPhone using Audizine

Thanks for the info. Yes, mine is a quattro. I thought the tolerance was for diamator, not width? If I was running 255/30s on all 4, wouldn't it be within the tolerance? Appreciate your help.

[Tech0515]

Any thoughts on Niche Surge M112: 20x10.5, 5x112, Ofset 45 all around- Silver Machined?

Niche Surge M112: 20x10.5, 5x112, OS 45 - Silver Machined
http://4wheelonline.com/Images/Niche...che-m112-5.jpg

[Sean@TAG]

Any thoughts on Niche Surge M112: 20x10.5, 5x112, Ofset 45 all around- Silver Machined?

Niche Surge M112: 20x10.5, 5x112, OS 45 - Silver Machined
http://4wheelonline.com/Images/Niche...che-m112-5.jpg

Going to be a bit too aggressive unfortunatley. You will have clearance issues.

[Tech0515]

Going to be a bit too aggressive unfortunatley. You will have clearance issues.

Any recommendations for a similar looking wheel for a flush look?

[King James]

36094618286_f8d23d38e8_o by Audiyos, on Flickr

Whats the specs on these? They look great... would they fit over S4 front brakes I wonder?

[Mops@Nemesis]

Whats the specs on these? They look great... would they fit over S4 front brakes I wonder?

19x9.5 et37. 5mm spacers required up front with S4. It’s a great look.






Mops On The Move

[Mops@Nemesis]

20x9 +35 V-FF 107 in Carbon Graphite.

[Flava]

Now that spring is back I will miss my winter wheels...
A4 BLACK WHEELS 2.jpg
WHEEL.jpg

Please let me know what you think of this setup

[Thrilla]

20x9 +35 V-FF 107 in Carbon Graphite.

Any info on supension, tire size, or spacers?