B5 S4 BBK: Brembo 17Z - Fresh rebuild and powdercoat

[AudiMode]

Hey all,
I am selling my Brembo 17Z calipers. I purchased these off a fellow forum member but ended up selling my car before installing them. I'm asking $600 OBO.

-Jake

_DSC1363_DSC1363 by Jake Thayer, on Flickr

[mauromj]

These can be bought for $150 a piece with a fresh rebuild....

[Kruat]

These can be bought for $150 a piece with a fresh rebuild....

Where?

[mauromj]

Rock Auto. Search under Porsche Cayenne. They are remanufactured OEM brembo 17z.

[MarlinFoundNemo]

Rock Auto. Search under Porsche Cayenne. They are remanufactured OEM brembo 17z.

What year?

[QuinnsterKID]

Damn those are clean. Those also have the crossover tubes on them which are $100 alone. I dont believe rockauto comes with crossover tubes. You have to source your own.

[MarlinFoundNemo]

Damn those are clean. Those also have the crossover tubes on them which are $100 alone. I dont believe rockauto comes with crossover tubes. You have to source your own.

Crossover tubes?

[rubbndubbn]

Crossover tubes?

Crossover tube is the tube on the right hand side of the first caliper that goes from front to back. These are needed I believe so you can run the left caliper on the right and the right on the left due to the size of the pistons (small to big) in the calipers.

[Audiholics Anon]

What year Cayenne and where do you get the x over tube?

[MarlinFoundNemo]

Crossover tube is the tube on the right hand side of the first caliper that goes from front to back. These are needed I believe so you can run the left caliper on the right and the right on the left due to the size of the pistons (small to big) in the calipers.

I thought each caliper would only work on one side? What would make it fit better on one side vs the other??

[rubbndubbn]

I thought each caliper would only work on one side? What would make it fit better on one side vs the other??

Staggered piston sizes. Because the Cayenne has calipers on the leading edge of the rotor, and the S4 has them on the trailing edge to get around this is to mount the right caliper on the left side and vice-versa. Then to switch the bleeder and Crossover tube. I could be wrong on this and if you want to talk about it just PM me as I dont want to fill this guys thread with non for sale information.

GLWS they look to be in amazing condition!

[MarlinFoundNemo]

Staggered piston sizes. Because the Cayenne has calipers on the leading edge of the rotor, and the S4 has them on the trailing edge to get around this is to mount the right caliper on the left side and vice-versa. Then to switch the bleeder and Crossover tube. I could be wrong on this and if you want to talk about it just PM me as I dont want to fill this guys thread with non for sale information.

GLWS they look to be in amazing condition!

Ah okay I got it now! Sorry for spamming your thread OP, GLWS!! I'd love em on my santorin, but need a 6mt first :)

[mattman808]

The ones that I see on Rockauto are about $200, but have a $400 core charge!

[crxgator]

Yeah. He posts on everyone's thread that is selling 17z.

[mauromj]

Yeah. He posts on everyone's thread that is selling 17z.

Yup.

Everyone who is asking WAY to much for them...

If they are not showing up on rock auto, then look here. Lots of different places are selling the same re-manufactured calipers.

http://www.ebay.com/itm/Cardone-Brak...xVLs~J&vxp=mtr

[crxgator]

And once again you need to supply a core or pay a core charge.

[crxgator]

So a pair from that seller is $420 and that doesn't include the powder coating

[mauromj]

[QUOTE=crxgator;11314720]And once again you need to supply a core or pay a core charge.[/QUOT

This is what I paid from rock auto a month ago......

I was implying that ~$150 INCLUDES the CORE and SHIPPING. See for yourself....................................



Now please and politely GTFO.

[vavJETTAw36]

Have you seen how pitted up those remans can be?

Id say $400 is the going rate for used 17z calipers. $200 for the powdercoating plus all the work involved to rebuild, crossovers, new seals... This is not an unreasonable price!!!!

[crxgator]

[QUOTE=mauromj;11315502]

And once again you need to supply a core or pay a core charge.[/QUOT

This is what I paid from rock auto a month ago......

I was implying that ~$150 INCLUDES the CORE and SHIPPING. See for yourself....................................



Now please and politely GTFO.

Me gtfo? I'm not the douche bag going into everyone's tread and being a cocksucker about it.

[mauromj]

Me gtfo? I'm not the douche bag going into everyone's tread and being a cocksucker about it.

I'm being real about it.

[crxgator]

You're being an asshole.

[mauromj]

You're being an asshole.

By pointing out people attempting to sell parts for twice what they are worth? Is that being an asshole? To whom is it being an asshole towards?

[crxgator]

You posted a link to a ebay seller selling the calipers for $420 shipped, and that doesn't include the body work, powder coating or crossover tubes like the OP has with his. His price is also "best offer."

If you don't like someone's price, keep it to yourself.

[Bordom]

By pointing out people attempting to sell parts for twice what they are worth? Is that being an asshole? To whom is it being an asshole towards?

I found 17z's at a junk yard for a steal. Would I go to someone's sale thread where they clearly put in much effort to powder coat and rebuild the caliper and muddy it by saying "I can get remans for less"? Obviously not as they don't include everything these do. Real work went into these, especially them being a bright ass colour.

So pretentious.

You posted a link to a ebay seller selling the calipers for $420 shipped, and that doesn't include the body work, powder coating or crossover tubes like the OP has with his. His price is also "best offer."

If you don't like someone's price, keep it to yourself.

x2

[AudiMode]

Have you seen how pitted up those remans can be?

Id say $400 is the going rate for used 17z calipers. $200 for the powdercoating plus all the work involved to rebuild, crossovers, new seals... This is not an unreasonable price!!!!

vavJETTAw36 you tell em'!

What I don't understand is: Who has so much free time that they lurk around the internet, policing the classifieds, to make sure that people, whom they have never and will never meet, don't get a bad deal on an item that they have no intention of purchasing themselves? You know how supply and demand works right? If my price is too high, nobody will buy it; no need to fret! And, as others have said, a lot of work has gone into these. I feel that my price is fair. Anyways...

BUMP

[1sadavant]

[QUOTE=mauromj;11315502]

And once again you need to supply a core or pay a core charge.[/QUOT

This is what I paid from rock auto a month ago......

I was implying that ~$150 INCLUDES the CORE and SHIPPING. See for yourself....................................



Now please and politely GTFO.

I understand that you are really pushing this issue, but you fail to mention that the reman's do not come with the following:

2 x 95535196100 (cross-over pipes) shipped to your Pullman WA Zip Code from ECS tuning (cheapest price out there on these) $69.44
You really should replace those shitty oversized (too long) cardone bleeder valves with the authentic Brembo (93035191900) ones, unless you like stripped threads/leaks...so that now brings your total from ECS tuning to $110.78 shipped to your address

So the total for you would for 2 cardone calipers, pad mounting hardware, brembo cross-over lines, and bleeders: $410 for a set with shitty paint that can be installed. Oh and the cross-over lines are on back order for a month...I hope this puts an end to your trivial contributions.

Now...go find a powdercoater that is going to do complete job of disassembling the calipers, blasting them, and placing the decals for less then the OP is asking...

[AudiMode]

A couple people have asked for additional pics...

_DSC4838 by Jake Thayer, on Flickr

_DSC4841 by Jake Thayer, on Flickr

[AudiMode]

Bump! Price is OBO

[TheDuke]

So for $600 minus pads I can bolt these on my B5 S4 with stock rotors? Stock Cradle bolts to mount them to the spindle?

thank you

[jbain2]

So for $600 minus pads I can bolt these on my B5 S4 with stock rotors? Stock Cradle bolts to mount them to the spindle?

thank you

No. Search 17z/18z. You will see there is a crazy amount of info on this swap. You will need rotors, mounting hardware, lines and either wear sensors or the adapter that plugs into the stock wear sensor to fool it into thinking the pads are fine.

OP, nice looking calipers.

[TheDuke]

Thank you, found this link of all those random parts sold at this place: http://audibbkparts.bigcartel.com/pr...r-decals-110mm

[AudiMode]

Price drop: $500 OBO

Sent from my SM-N900V using Tapatalk

[Kenrevo]

You have a PM

Sent from my SAMSUNG-SM-N910A using Tapatalk

[jbain2]

If you don't work something out with kenrevo, let me know. Might just throw these on my B7.

[AudiMode]

BACK FROM THE DEAD! I still have these things sitting around acting as expensive doorstops. Looking for $450

[JuggernautB5]

pmed you

[1sadavant]

Thats a hell of a price...I am sure they will go quickly!