M'AUTOLITE LED Headlights/foglights $30 OFF - INSTANT REBATE OFFER by HIDCONCEPT.COM

[mike@hidconcept]

Happy New Year to all AZ members!

We are offering $30 INSTANT REBATE OFFER on M'AUTOLITE LED headlights/foglights from 12/30/2015 thru 1/9/2016.
USED Coupon Code: MAUTO30

M'AUTOLITE LED lights use true PHILIPS Luxeon MZ LED chips to produce 360 degree light distribution and 2500 lumen without requiring a bulky cooling fan.
Installation is very straight forward and plug & play simple without any custom wiring or cutting involved.
Flexible 100% COPPER (Cu) Weave cloth heat-sink would make the installation much easier.
Fully compatible with 9005

TECHNICAL SPEC
Type : H1, H3, H4, H7, H8, H10, H11, H13, 9005, 9006
2500 lumens per bulb
360 degree light distribution
100% Copper (Cu) flexible weave cloth heat-sink
Color: appx. 5500K, pure white
Application: Head light, Fog light
Estimated lifespan: 50,000 hrs
Voltage: DC12V - 24V
Input Current: 1.6A (DC 12V)
Power: 40W set (20W /bulb x 2)

Photos:


Comparison photo showing halogen fog vs. M'AUTOLITE fog with low beams on.




Photos taken by AZ member: fromario (Thanks for taking photos) from this thread.
1. M'AUTOLITE LED lights on fogs w/DRL only.

2. M'AUTOLITE LED lights on fogs w/Philips X-tremeVision D3S bulbs

3. M'AUTOLITE LED on passenger's side vs. Philips 2700K Yellow LED on driver side

4. M'AUTOLITE LED on passenger's side vs. Philips 2700K Yellow LED on driver side


Porsche Macan: Halogen vs. M'AUTOLITE LED comparison shot



If you have any questions, please feel free to contact us at 1-888-579-5917 or email us at [email protected].
We are friendly. :D

[Pyromatic177]

I'm looking at these for my Subaru Forester. Which is an H4 bulb. And the headlights have those rubber boots that fit over them bulbs for water protection. Does this kit have a seal on the bulb itself since the heat sinks on see bulbs stick out and I can't put the boot back on?

[mike@hidconcept]

I'm looking at these for my Subaru Forester. Which is an H4 bulb. And the headlights have those rubber boots that fit over them bulbs for water protection. Does this kit have a seal on the bulb itself since the heat sinks on see bulbs stick out and I can't put the boot back on?

We actually tried on H4 headlamps before.
You need to slide LED unit (without H4 base) through the rubber boot, put the H4 base on LED unit, secure it with the retaining clip on headlamp housing, put the rubber boot on, and flex out the copper heat-sink.

[VenturiRS]

Just ordered a set. I've seen the Porsche pics before but does anyone with a B8 have pictures?

[mike@hidconcept]

Just ordered a set. I've seen the Porsche pics before but does anyone with a B8 have pictures?

Thanks for the photo.
Loop up and check first two top photos (below the LED light photo).
That is black B8 A4.

[VenturiRS]

Missed that Mike. Thank you. Can't wait for them to get here.

[Pyromatic177]

How do they function as headlights? Is the beam everywhere or actually focused?

[mike@hidconcept]

How do they function as headlights? Is the beam everywhere or actually focused?

Compared to halogen light (approx.1300lm), LED's give 2500lm, which is much brighter.
Beam pattern is not too bad but honestly, when it's used on chrome reflector, it would not be focused like projector beam.
IMO, it is better to use HID for low beam headlamps and use LEDs for fogs.

[StevenStarke]

Can I just just paypal you for a yellow set of fogs for my 2013 S4? And you can apply the discount?

[AmrS4]

Just placed an order !! Halogens are going rite in the trash

[mmm def]

No bulb out error codes?

[AmrS4]

No bulb out error codes?

Just going to ask the same thing

[mike@hidconcept]

Just placed an order !! Halogens are going rite in the trash

i feel sorry for halogen but you will be happy with LED lights.

- - - Updated - - -

No bulb out error codes?

No error code for sure on B8 as well as B8.5.

[mike@hidconcept]

We managed to ship out all orders today.

Thank You for your business and support.
Without you, we would not be here and would not be able to support the forum community.
Happy New Year to you all AZ members and your family.

Mike @HID CONCEPT

[mike@hidconcept]

Enjoy the last day of the long weekend.

[AmrS4]

Just got these in and installed them in like 15 mins , love them for such a small upgrade alot cleaner and brighter then stock . I am really happy and can't wait till night time to see the actual brightness . Highly recommended, great company !

[IMG][/IMG]

[IMG][/IMG]

[mike@hidconcept]

Just got these in and installed them in like 15 mins , love them for such a small upgrade alot cleaner and brighter then stock . I am really happy and can't wait till night time to see the actual brightness . Highly recommended, great company !

[IMG][/IMG]

[IMG][/IMG]

Awesome clean ride! Looks even better with the LED light. :D Thank You!

[13allroad]

Mine shipped today, waiting.

Is there anyway to get just one for a motorcycle headlight?


Sent from my iPhone using Tapatalk

[mike@hidconcept]

Mine shipped today, waiting.

Is there anyway to get just one for a motorcycle headlight?


Sent from my iPhone using Tapatalk

Call us to order for 1/2 of kit.
IMO, motorcycles can be little tricky since they usually use third adaptor piece between the bulb and prong.
In other words, if there is no bulb adaptor thingy, you are good to go.

[mike@hidconcept]

We welcome more photos. :D

[GTItoS4]

Got any solutions for the turning spotlights (or whatever they're called)? It's rather annoying how dim and poorly matched they are to the headlights.

[mike@hidconcept]

Got any solutions for the turning spotlights (or whatever they're called)? It's rather annoying how dim and poorly matched they are to the headlights.

You are referring to cornering lights I assume.
It uses H7 light and you can use the LED light as well.
We haven't tested on B8 S4 but we tried it on Porsche Macan and cornering light worked perfectly fine with dimming down and brighten up feature.

[AmrS4]

Hey Mike how about some led reverse bulbs . I believe they are 921 bulbs , I'm looking for no error ones obviously.

[Szemenyei]

Hey Mike how about some led reverse bulbs . I believe they are 921 bulbs , I'm looking for no error ones obviously.

I just picked up a set of Philips bulbs off their site for my reverse lights.. I didn't read if they will be error free anywhere on the post but I had just placed an order of their fog lights so I figured might as well try out these. We will see if they work error free and I will post my findings.

[Rocket Tech]

Install was a piece of cake for the fog lights. I'm amazed at the throw these things have. I'll admit I don't normally drive with my fog lights on because I dislike the yellow halogen appearance, I feel it breaks up the look of the front end. I know there are others who love the deep yellow look, just not for me. These h8 bulbs match really well with the drl led strip and hid projector.

I normally don't buy into led/hid conversions but these look so good I went ahead and purchased a set of the h7s to try on my cornering lights. I found the write up for the macan installation but I think our housings are a bit smaller, I'm not sure all the electronics will fit in behind the rubber weather close out cap. I'll report back with my findings on the h7 bulbs at the cornering light location.

[mike@hidconcept]

Hey Mike how about some led reverse bulbs . I believe they are 921 bulbs , I'm looking for no error ones obviously.

Here it is.
http://www.hidconcept.com/921-philip...acement-bulbs/

[mike@hidconcept]

Install was a piece of cake for the fog lights. I'm amazed at the throw these things have. I'll admit I don't normally drive with my fog lights on because I dislike the yellow halogen appearance, I feel it breaks up the look of the front end. I know there are others who love the deep yellow look, just not for me. These h8 bulbs match really well with the drl led strip and hid projector.

I normally don't buy into led/hid conversions but these look so good I went ahead and purchased a set of the h7s to try on my cornering lights. I found the write up for the macan installation but I think our housings are a bit smaller, I'm not sure all the electronics will fit in behind the rubber weather close out cap. I'll report back with my findings on the h7 bulbs at the cornering light location.

Thanks for the comment.
We try to offer things that are good for the value. :D
Feel free to post some photos of your ride. lol

[mmm def]

Just ordered some H11 Fogs. Thanks!

[mike@hidconcept]

Thank You for all orders.
All orders received by 2 P.M. CST have been shipped today.
Orders received after that will ship out tomorrow.

[Rocket Tech]

Everyone's got the basic led vs halogen comparison!

Fog lights off, drl and headlight on:


Fog lights on, note the additional visibility of the garage door across the street, the bushes to the right, and the white fences across the street.


Factory h8 fog light, after removing wheel well liner:


Led bulb installed, heat sink fanned out:


Wiring secured:


The car:

[mike@hidconcept]

Awesome! Love the clean look of your ride.

[mike@hidconcept]

3 days remaining for the deal.

[turbophreak]

Ordered H11s and reverse lights today, great deal, can't wait to get them!

[Szemenyei]

Just installed reverse and fog lights today. I have pictures of the LED fogs next to my HID fogs they replaced Ill try to upload it later.

[mike@hidconcept]

Just installed reverse and fog lights today. I have pictures of the LED fogs next to my HID fogs they replaced Ill try to upload it later.

Awesome! Let me know if you need help with hosting photos.

[mike@hidconcept]

Bumping up the thread for those who might have missed out.
2 days remaining!

[VenturiRS]

Silly question, the passenger side puts more light on the ground. The driver side seems to scatter slightly an not put as much on the ground, I did not get a look in the daytime but I'm guessing it needs to be rotated a little more. So, should the bulb be installed vertical [|] or horizontal =? I'll take a look tomorrow to make sure the driver side matches the passenger.

[mike@hidconcept]

Silly question, the passenger side puts more light on the ground. The driver side seems to scatter slightly an not put as much on the ground, I did not get a look in the daytime but I'm guessing it needs to be rotated a little more. So, should the bulb be installed vertical [|] or horizontal =? I'll take a look tomorrow to make sure the driver side matches the passenger.

It needs to be vertical after being properly installed.

[VenturiRS]

It needs to be vertical after being properly installed.

Thanks Mike, I'll check at lunch and get back.

[Rocket Tech]

NOTE: for anyone wanting to try these lights at the cornering/adaptive light position, these will not work (at least not on b8.5, ymmv). Unfortunately these will throw a code in that position and disable the system from functioning. My fog lights continue to work fine, just some reason the adaptive lights don't like these bulbs. Bummer, I was really looking forward to throwing some serious side lighting in the turns.