Fitzy's Glacier White 2016 Audi S3 Build - TAG Motorsports

**Fitzy** · 12-28-2015 08:00 PM

Edited

**markn1689** · 12-28-2015 08:35 PM

siiick!! i also got my ecodes from Tag! and im g white too

your car looks great. id put some CF mirror caps on that.

got pics of the rs3 steering wheel?

**Primolak** · 12-28-2015 10:14 PM

Looks really nice! Well done.

Sent from my iPhone using Tapatalk

**Fitzy** · 12-29-2015 12:35 AM

Originally Posted by markn1689

siiick!! i also got my ecodes from Tag! and im g white too

your car looks great. id put some CF mirror caps on that.

got pics of the rs3 steering wheel?

Still deciding if the car needs Carbon Fiber bits (rear spoiler, rear splitter, mirror, etc.) - I'm liking the clean OEM look it has now - worried carbon fiber may make it look cheap.

RE: the steering wheel I'll have some pictures soon. TAG took great care of me on the wheel. I worked with Alex over there - I'd connect with them and order one from Germany. It's my favorite MOD so far - so much better than the S3 wheel.

**Benji00** · 12-29-2015 05:33 AM

Looking good!

I'd highly recommend the CF, especially on glacier.

**deadbolt** · 12-29-2015 07:20 AM

Nice ride man!

If you dont mind me asking... how much did the RS3 steering wheel run you?

**HRE Wheels** · 12-29-2015 02:11 PM

Looks fantastic but you know we all need more photos!

**Fitzy** · 12-30-2015 07:10 PM

Edited

**ajfraser12** · 12-30-2015 07:55 PM

APR Stage 2!

**Fitzy** · 12-30-2015 11:47 PM

Originally Posted by ajfraser12

APR Stage 2!

Keeping this warranty until it expires. However - I do think that if I keep the car I will go Stage 2 or 3. For sure will do turbo-back exhaust, intake, intercooler and a tune at some point.

**coolwater** · 12-31-2015 04:54 AM

You could opt for a flash from home solution when available. Eurodyne and unitronic offer it for most 2015's and I'm sure they are working on newer ecus.

-cW

Sent from my SM-G900V using Tapatalk

**will13k7** · 12-31-2015 09:55 AM

I know you don't want to lower it, but man, that will set this car off! Those wheels look great!

**Fitzy** · 01-01-2016 11:34 PM

Originally Posted by will13k7

I know you don't want to lower it, but man, that will set this car off! Those wheels look great!

I agree - I'd love to but not with the current city I'm leaving in... The suspension is already making a lot of noise in the back - want to have Audi sort out the mag-ride before I start modifying it!

**Joe@TAG** · 01-04-2016 10:49 AM

The car looks fantastic!!

**Fitzy** · 01-04-2016 02:18 PM

Originally Posted by Grubbs@TAG

The car looks fantastic!!

Thanks man! Wish you were taking some photos of it!!

**Fitzy** · 01-21-2016 07:12 PM

Received these parts today from CTS Tuning. Goal here was to increase the sound of the turbo and intake, while not being obnoxious. Will let you know next week how I did.

CTS Intake
CTS Diverter Valve
CTS Turbo Muffler Delete
CTS Turbo Inlet Intake

I'm looking to do a full AWE exhaust to compliment these parts and then it's time to rack up some miles before GIAC Stage II

**ryan_sn** · 01-21-2016 08:09 PM

Hoooold up! Where did you get that steering wheel???? I want one!

**Fitzy** · 01-24-2016 02:47 PM

Steering wheel came from TAG motorsports. Give them a shout and tell them Fitz sent you!

**Fitzy** · 05-20-2016 04:25 PM

A couple updates on the car...

I've decided to sell my wheels and will be putting a set of brushed gold HRE forged wheels on the car... Thank you Tag Motorsports!! Will upgrade more of the car around the wheels and will be putting on a Stoptech 6 piston BBK and AWE Switchpath exhaust. Once it is all installed I'll share some images - still need to get a professional photographer to help me out!

If you are interested in the wheels/tires check out the below thread:

http://www.audizine.com/forum/showth...er-Sport-Tires

I've made some interior updates with a hardwire Escort Max 360 w/ Blendmount and a Pro-clip mount for my Iphone on center dash. I'll grab some photos of those as well later next week!!

**photocycler** · 05-20-2016 05:00 PM

Beautiful car and beautiful wheels. Im in Portland also, too bad the wheels are higher than my budget. Any chance you still have the stock wheels and tires?

**Fitzy** · 05-22-2016 09:49 PM

Originally Posted by photocycler

Beautiful car and beautiful wheels. Im in Portland also, too bad the wheels are higher than my budget. Any chance you still have the stock wheels and tires?

I'd let the wheels go for $2500 without tires. Shoot me a PM

**photocycler** · 05-25-2016 08:23 AM

PM sent

**mitch501** · 05-26-2016 09:59 AM

Nice car! Which forged HREs did you decide to go with?

**photocycler** · 05-27-2016 08:14 AM

PM'd again

**XLR8 Craig** · 05-27-2016 09:37 AM

Originally Posted by Fitzy

I agree - I'd love to but not with the current city I'm leaving in... The suspension is already making a lot of noise in the back - want to have Audi sort out the mag-ride before I start modifying it!

When you do, let me know I have a great solution for you that will peak your interest :)

**Fitzy** · 05-29-2016 12:34 PM

Originally Posted by photocycler

PM'd again

Sorry man. I'm out of the country. I just sent you a PM with details to text me. Happy to work out a deal for the FF15 wheels.

Originally Posted by mitch501

Nice car! Which forged HREs did you decide to go with?

HRE RC100 in Brushed Gold 19 x 9

**Fitzy** · 06-24-2016 06:24 PM

Edited

**TCHUN003** · 06-24-2016 09:41 PM

Can't wait to see the 380mm stoptechs

**seanentrust** · 06-25-2016 03:57 PM

Beautiful! Fellow portlander here who is really wanting an s3!

**Fitzy** · 12-15-2016 10:13 AM

Edited

**auburnjosh** · 12-15-2016 07:14 PM

Nice Wheels! I want to see those in the brushed copper.

**phillyquattro** · 12-15-2016 10:08 PM

Love that finish!

I've been eying a set of ADV1's in either a brushed gold or copper. This makes me want to pull the trigger even more. Ugh!

**Fitzy** · 12-18-2016 11:53 PM

Originally Posted by auburnjosh

Nice Wheels! I want to see those in the brushed copper.

Brushed copper is nice - the color contrast is a bit more sharp then the brushed gold. My 2nd choice was a satin bronze finish - but decided what the heck - go gold :)

**HBird** · 12-19-2016 06:57 AM

The white and gold combo looks awesome! Also loving the S3 logo on the StopTech calipers

**sean_entrust** · 05-28-2017 04:15 PM

bumping an old thread, I live in portland also and picked up an s3, i just installed the 034 springs and they completely changed the car while still keeping a stock ride. Let me know if you want to check them out.