ste ppd help

[replica_rs4]

I know there is no more support for ste which is a huge bummer.
Long story short i forgot to click disconnect before i pulled out usb. Now when i plug in usb i get a message . Last time device was used, it malfunctioned . Any thoughts on what to do now?
thank you

[zillarob]

Unplug it for a while? Like completely unplugged, from everything.

This is the board that it runs on if you want to attack it from this angle. Looks like a reset button on there.
https://www.ghielectronics.com/catalog/product/256

[replica_rs4]

Unplug it for a while? Like completely unplugged, from everything.

This is the board that it runs on if you want to attack it from this angle. Looks like a reset button on there.
https://www.ghielectronics.com/catalog/product/256

I guess unplugging the battery would be same as unplugging ste unit. I believe there is some kind of battery back up as I have stored my car before with no battery and ste did not need to be re programmed again after storage .


Sent from my SM-N9005 using Tapatalk

[zillarob]

That would prob work too. Leave it unhooked for a bit.

It has nonvolatile memory so no need for a battery. Hopefully it "forgets" the muck-up.