Not sure what this is called

[B6_A4_Kid]

I was driving home from work and notices that my turbo had a different sound. Got home opened the hood and there is a loud hiss and the idle is super rough. So I know it's a vacuum leak, I know exactly where it is. I am just not sure if the line is available to be purchased anywhere. I don't know how to add a picture to AZ so I will describe it. It is right behind the throttle body, the hose keeps coming apart, when it come apart there are two red dots on the inside that almost look like valves. You have to line it up perfectly and push it back together. Hopefully one of you guys can help me figure this one out

[old guy]

This?



SJP. Suction jet pump. Clicky click®

[B6_A4_Kid]

That's it!

[B6_A4_Kid]

I found a whole oem assembly for 30 bucks,


http://m.aliexpress.com/item/3236264...bilesitedetail

This is the correct one right?

[old guy]

What model year is your B6?

[treysgreen]

Do not order from aliexpress. The part is inexpensive and aliexpress will take ages to ship it. It's called your Suction Jet Pump(SJP). You do not need the entire assembly you see in your post. Post the year model of your car and we can get you the proper part number.

[B6_A4_Kid]

It's an 04

[old guy]

It's an 04

The link I provided is just for the SJP. Your link is correct if you want to replace the associated check valves. You can perform a temporary repair with Super Glue or Epoxy to hold the SJP together until your replacement arrives.

[B6_A4_Kid]

I don't necessarily need the whole assembly, just saw it and thought it might be a good idea. So it will be okay to super glue it as a temp setup?

[old guy]

Yep. Look inside the two sections and make sure you align the rib in the groove.

[B6_A4_Kid]

That worked perfectly! Thanks guys and merry Christmas to you and your families!

[benjad]

Anyone know about the selinoid the connects to the combi valve? And where I can get one?

Sent from my SM-G925P using Tapatalk

[RDA990]

Anyone know about the selinoid the connects to the combi valve? And where I can get one?

Sent from my SM-G925P using Tapatalk

N112 valve that sits under the intake manifold next to the N249.

Part #: 026906283J

https://www.europaparts.com/egr-sole...26906283j.html

http://www.jimellisvwparts.com/produ...26906283J.html

https://www.ecstuning.com/Volkswagen...News/ES258893/

[benjad]

Yes I thi k that's it. I replaced combi valve and plastic hoses and sludge pump.

Sent from my SM-G925P using Tapatalk

[benjad]

Could the hoee be bad. The one from combi to solenoid? Are they hard to replace a.my special tools needed?

Sent from my SM-G925P using Tapatalk

[RDA990]

No you just need to remove the 2 one-time use clamps on them. I'm not sure why you're changing all that, what's wrong with your car?

[benjad]

It won't pass emissions I have replace the sludge pump hoses and combi valve. This is the next thing to replace. What else could it be?

Sent from my SM-G925P using Tapatalk

[benjad]

No you just need to remove the 2 one-time use clamps on them. I'm not sure why you're changing all that, what's wrong with your car?

What else could it be for P0411 error code? Secondary Air Injection Incorrect Upstream Flow Dectected.

Sent from my SM-G925P using Tapatalk

[RDA990]

What else could it be for P0411 error code? Secondary Air Injection Incorrect Upstream Flow Dectected.

Sent from my SM-G925P using Tapatalk

You should have started at the pump then working yourself up (Pump -> 2 plastic hoses from pump -> EGR Valve -> Etc.).

Check the pump and make sure it works, if you have vagcom you can run a test on it to see if the pump and N112 both work. You said you changed the hoses from the pump? Make sure they are on right/tight at the links. After that double check the hose from the EGR Valve to the N112 you want to replace. If all that is good then start looking at the N112 and the other cable that goes to it.

Here is a good link on that code:

http://wiki.ross-tech.com/wiki/index...5/P0411/001041

Try this too:

http://www.audizine.com/forum/showthread.php?p=7363669

[benjad]

I replaced the pump first the the combi valve and just replaced the hoses connecting to the pump. Next is the solinoid.

Sent from my SM-G925P using Tapatalk

[benjad]

I don't have a bagcom

Sent from my SM-G925P using Tapatalk