Colored wheel nuts

[Challenger300]

Hello,

I am trying to find those wheel lug nuts



They must be 14x1.5 conical. I have found some at ebay.com but I am wondering about the quality and I didn't find exactly this colour.

Any suggestions?.

Thanks

[Shimmy]

get a stud conversion and you'll have endless color options for lug nuts.

[Challenger300]

get a stud conversion and you'll have endless color options for lug nuts.

I have seen all the models at ebay, but I am asking for any particular brand recommended

[Shimmy]

I ran projek kics with no issues. beware there's lots of cheap Chinese versions out there

[Challenger300]

I ran projek kics with no issues. beware there's lots of cheap Chinese versions out there

Kicks doesn't make m14x1.5, all are m12

[AsianA408]

Stud conversion... went with red.

[Challenger300]

Stud conversion... went with red.

Thanks for the picture, very nice. This is what I am looking for.
Please, could you give more details? Brand? Where did you buy it?
Thanks

[AsianA408]

I bought the studs from ringerracing in phx. mike hood is your guy there. then the lugs are just from ebay. their typical aluminum colored ones you find anywhere. Varrstoen wheels makes a decent set.

[Challenger300]

I bought the studs from ringerracing in phx. mike hood is your guy there. then the lugs are just from ebay. their typical aluminum colored ones you find anywhere. Varrstoen wheels makes a decent set.

Varrstoen only make M12 lug nuts. Audi uses M14x1.5

[AsianA408]

i get that.. you need to convert 14mm to 12mm.

you then have a new world of bolts to choose from and are also able to use 5x114 wheels. AKA japanese wheels.

[KFizz]

I bought my stud conversion kit and nuts from 034 Motorsport. I later bought different extended wheel nuts from Motorsport Hardware. In retrospect I wish I had just bought everything from Motorsport Hardware. Seems to me to be better quality. The nuts I got from 034 began to peel their coating almost right away. The contact at Motorsport Hardware (I cant remember his name off hand, Brian??) was very helpful and quick to respond to my questions.

https://motorsporthardware.com/produ...ace-nuts-audi/

[Challenger300]

Thanks for the info. I finally have ordered the monster lug nuts. I will post some pics upon arrival

[SleeperCar]

Op funny you bring this up, i saw that video a while back and loved those lugs as well. I currently run mevius lugs but they arent a stud conversion. Ive wanted to do the stud conversion but never found colors i liked.

[Challenger300]

I have just received those two models:

Light red/pink are aluminum and the reds are steel. I am not sure if this is the colour that I am looking for. I am rhinking to sell them and buy a new set in other colour