VAST/Devil's Own Meth injection - stainless lines= - needs a pump

[RedRocketS4]

Old VAST setup. Includes the controller, braided stainless -4AN line upgrade, fittings for pump, pump cover, pump mounting bracket, BAD pump, nozzles, fittings, etc. you will need to get a new pump from Devil's own to make this work. I have attached the link below. Unsure of nozzle size. The system was used on a k04 b5 s4. This is the "old style" stage 2 kit that you need to tie into the map sensor wiring.

Asking $175, which includes shipping to the lower 48. Pics below. Or best reasonable offer. Packed and ready to ship.

Install Instructions in post #8 of this thread
http://www.audizine.com/forum/showth...saved-as-a-PDF

This is the pump you will need.

http://www.alcohol-injection.com/en/...tion-pump.html

[S4tech2]

Let me know if no one wants it. I will most likely be able to purchase this in a month or so.

[DieselElectric]

Is that the new style recirculating pump? (No wiring going to the top).

Does the pump turn on? I ask because you can replace the top for a decent price. Just for any potential buyers.

If it's the old style, might as well upgrade to the recirculating one anyway.

GLWS, great kit.

[RedRocketS4]

The pump does turn on and I believe it is the "new style" pump. Meaning that you could probably replace the lower housing assembly and it would be good. I found lower assembly for $45 shipped using a quick search. So, you could theoretically have a meth kit for $220 with nice stainless lines.

http://www.ebay.com/itm/like/3017838...chn=ps&lpid=82

[RedRocketS4]

Sold