B8.5 allroad Info & Resources Megathread

[KneeDragger]

Any specs on the OEM Sway Bar sizes? Has

Also I've noticed a huge increase in mpg when driving it in manual mode, especially on the freeway.

[Unit1Evangelion]

Any specs on the OEM Sway Bar sizes? Has

Also I've noticed a huge increase in mpg when driving it in manual mode, especially on the freeway.

26/20mm if I'm not mistaken. Also, I just started noticing that as well. I think its cause when you are in D you go from 7 to 8 down to 7 and again to 8 in seconds with the slightest fluctuation in the throttle. I average 300miles per tank in D. Around 330+ with manual.

[miketweedie]

has anyone confirmed the part numbers for suspension setups?
I see a few guys running ST, but according to them, they don't make a kit that fits. is the 90618 avant kit what people run?
what other options?

[lokak]

Now that I am apart of this shit show, I got some questions that need answers....I demand to speak to Sampson!!!

Has anybody taken the headlights apart to remove the amber in the headlights?

Any tunes out there with launch control?

Has anybody blacked out the aluminum pieces on the bumper, side skirt, rear bumper, or even window trim?

Blacked out the OEM grill?

Yeah, I have a blacked out OEM grille - check out my build thread in my sig

has anyone confirmed the part numbers for suspension setups?
I see a few guys running ST, but according to them, they don't make a kit that fits. is the 90618 avant kit what people run?
what other options?

I'm currently running Vogtland coilovers (Part# 968116), but they're pretty much exactly the same as ST/KW V1. I'm using KW's spacers to raise the rear because it was too much of a drop for me even at its highest setting.

[Killerboots]

I don't think I saw the part # for the Rear Cargo net anywhere in this thread. Can someone confirm the correct part #? There are many variations! I believe it's 8E5861869AMRY

[dropshadow]

I don't think I saw the part # for the Rear Cargo net anywhere in this thread. Can someone confirm the correct part #? There are many variations! I believe it's 8E5861869AMRY

If you mean the partition/dog gate, it's this:

REAR BOOT COMPARTMENT NET PARTITION
8K9 861 691 6PS

I have a black one I was going to post for sale soon.

[KneeDragger]

We really need to figure out this Traction Control situation, it's almost dangerous trying to drive and have fun when this thing can't disengage.

[Killerboots]

If you mean the partition/dog gate, it's this:

REAR BOOT COMPARTMENT NET PARTITION
8K9 861 691 6PS

I have a black one I was going to post for sale soon.

That's good to know as well! My partition has taken some abuse! The part I'm looking for has 4 hooks, one in each corner and holds items down with its stretchy netting (groceries, sporting equipment, etc.).

[KneeDragger]

Do the B8 A4 after market intakes fit the Allroads? Like Carbonio or Injen...

[dropshadow]

Do the B8 A4 after market intakes fit the Allroads? Like Carbonio or Injen...

Yes

[KneeDragger]

Yes

nice and thanks, hopefully we get the ball rolling on the model-line section for the allroads

[dropshadow]

nice and thanks, hopefully we get the ball rolling on the model-line section for the allroads

Amen to that. That's what I hoped this thread would accomplish.

[KneeDragger]

Amen to that. That's what I hoped this thread would accomplish.

Already working on it with one of the moderators on here, fingers crossed but he's putting in the work for us and hopefully it will come true.

[KneeDragger]

I'm literally going to flood this place with questions haha

Anybody just weld exhaust tips? If so, where did you get the tips from?

The PO on my car cut out the mufflers and the car doesn't sound to bad but the stock tips look dumb IMO and I want something temp until I buy the Magnaflow system.

[dropshadow]

I'm literally going to flood this place with questions haha

Anybody just weld exhaust tips? If so, where did you get the tips from?

The PO on my car cut out the mufflers and the car doesn't sound to bad but the stock tips look dumb IMO and I want something temp until I buy the Magnaflow system.

Should be plenty of tip options out there. Magnaflow has a ton of different styles.

https://www.magnaflow.com/automotive-performance/tips/

[KneeDragger]

They are literally 7min away from my house, going to give them a call today.

Thanks bud

[KneeDragger]

Anybody try to do a swap like this? I know dropshadow did it with a perforated one but I like the look of these S3 Knobs.

http://www.audizine.com/forum/showth...ft-Knob/page12

[dropshadow]

Anybody try to do a swap like this? I know dropshadow did it with a perforated one but I like the look of these S3 Knobs.

http://www.audizine.com/forum/showth...ft-Knob/page12

The heat & twist method should work the same on our cars, and a lot of DSG B8 S4 owners have done it successfully. It looks nice, that's for sure.

[KneeDragger]

The heat & twist method should work the same on our cars, and a lot of DSG B8 S4 owners have done it successfully. It looks nice, that's for sure.

I'm going to go for it and try to create an allroad sticker for mine like the one on the back of your car.

[zcspec]

Bit the bullet and bought a Hex-Can cable. While waiting for the cable, I browsed the VAG codes section and became completely frustrated with how the section has become. I stopped reading after page 15 with 35+ pages left to browse! Because of this, I plan on coding my 2015 AR and will put together a PDF for others to use for reference. Mind you, this wont be a detail all/end all guide, rather a reference to the more common ones for the newer ARs. Stay tune!

[dropshadow]

Bit the bullet and bought a Hex-Can cable. While waiting for the cable, I browsed the VAG codes section and became completely frustrated with how the section has become. I stopped reading after page 15 with 35+ pages left to browse! Because of this, I plan on coding my 2015 AR and will put together a PDF for others to use for reference. Mind you, this wont be a detail all/end all guide, rather a reference to the more common ones for the newer ARs. Stay tune!

For the most part, the B8 codes from the first page of the main VCDS thread still apply, but there are some differences for the B8.5 facelift models. For those, there is a dedicated thread here that I used for my '13 S4 and '13 allroad.

B8: VCDS & Hidden menu: The complete list

B8.5: VCDS/Hidden Menu Mods Updated For Facelift 2013 B8.5's

[zcspec]

For the most part, the B8 codes from the first page of the main VCDS thread still apply, but there are some differences for the B8.5 facelift models. For those, there is a dedicated thread here that I used for my '13 S4 and '13 allroad.

B8: VCDS & Hidden menu: The complete list

B8.5: VCDS/Hidden Menu Mods Updated For Facelift 2013 B8.5's

thanks dropshadow. I'll look into it!

[ultra]

great thread,

does anyone know where I can get the stock allroad susp? I am on KW's now and I am thinking of just putting it back to stock for winter.

Also might have some wheels for sale soon if anyone is interested, they're a pretty specific AR fitment. If anyone is interest in 19x10 Rotiform SNA or20x9.5 BBS RSGT's let me know
and I'll get some pics.

[Allroad_Dan]

great thread,

does anyone know where I can get the stock allroad susp? I am on KW's now and I am thinking of just putting it back to stock for winter.

Also might have some wheels for sale soon if anyone is interested, they're a pretty specific AR fitment. If anyone is interest in 19x10 Rotiform SNA or20x9.5 BBS RSGT's let me know
and I'll get some pics.

I have stock Allroad suspension available, if you're local to me maybe we can work out some sort of deal. I'm located in Los Angeles.

[ultra]

Not local unfortunately but willing to cover shipping


Sent from my Nexus 7 using Tapatalk

[zcspec]

Those of you looking to run spacers on stock rims, I have a bit of feedback. I have the P+ package with the 18x8 26ET (that's what I have read) 245/45/18 setup and am lowered on SoloWerks with the following measurements:

FL: 13 5/8” / 26 1/4” GTF
FR: 13 1/2” / 26 1/8” GTF
RL: 13 7/8” / 26 5/8” GTF
RR: 13 3/4” / 26 5/8” GTF

The thickest you can run will be a 15mm hubcentric spacer. However, you'll have to remove the front fender screw. Originally I tried 20mm spacers which gave the rims a perfectly flush look. However, all four corners rubbed. Hope this helps someone in the future!

[Viper0088]

Anyone fit any big brake kits under the stock 18's 5 spokes? I'm looking at a stock RS 365mm kit with the 8 pistons. I know there's a fitment template, but I figured I'd ask for good measure.

[Killerboots]

Anyone fit any big brake kits under the stock 18's 5 spokes? I'm looking at a stock RS 365mm kit with the 8 pistons. I know there's a fitment template, but I figured I'd ask for good measure.

I'm considering these RS5 brakes as well for my allroad. I have the stock wheels off at the moment so here's a photo of the ECS provided BBK template. I would not want to be the guinea pig to attempt running 18's with that kit and 365mm rotors. I'm not sure what the tolerances are but the bottom left tip of that printout is hitting the inside of the wheel. Maybe with spacers??

Probably safer just picking up a set of 19's. But if anyone has done this I'd be really interested too.




Sent from my iPhone using Tapatalk

[dropshadow]

Added JDMFairlady's thread to the first page. If there are any other build threads I've missed, please let me know.

[zcspec]

As usual, thanks dropshadow for the contributions you make.

[dropshadow]

As usual, thanks dropshadow for the contributions you make.

Thanks, happy to help.

Just added Jsivadas' build thread to the first page.

[dropshadow]

Boosting the signal on this post:

To anyone with an Avant or Allroad:
____________________________________________

Allroad owners: if want to sell your stock suspension, or trade yours for my H&R Street Performance coilovers w/ spring spacers (with less than 10k miles), let me know!

Avant & Allroad owners: if you want to sell your stock cat-back exhaust system, or trade yours for my Billy Boat cat-back system, let me know!


Thanks guys.

[crash1121]

Boosting the signal on this post:

Thanks man, I really appreciate it!

[zcspec]

Thanks man, I really appreciate it!

Message me...I have my stock suspension with 2900 miles on it. Afterward, EMPTY YOUR BOX.

[dropshadow]

Added zcspec's thread to the first page. Keep 'em coming guys!

[moonshiner]

Awesome thread, just a note on the Thule AeroBlade option. I believe you need to get both the 7502(B) and 7503(B) as the bars are sold individually and the widths vary from front to back. I almost ordered a single 7502 and would have been confused when a single bar arrived in the mail.

[J_Sims]

3 new builds added since the 27th, It's raining beautiful Allroads!! Keep them coming

[Rickashae13]

I'll have a build thread eventually for my 2015 Allroad from Raincouver, BC but it'll be awhile. Gonna be a super slow build cuz I'd like to stay married lol .

So far only h&r spacers (15mm front, 20mm rear), front grill without license plate provision, APR Carbonio CF intake swapped over from my A4 and PIAA yellow fogs.

Coilovers after his winter though so she'll be nice and lowered soon!


Sent from my iPhone using Tapatalk

[lokak]

here's my build

http://www.audizine.com/forum/showth...d-build-thread

[dropshadow]

here's my build

http://www.audizine.com/forum/showth...d-build-thread

Added it. Sorry it was omitted. I had seen it, and even had it bookmarked with the rest. Must have just skipped it when I originally wrote that post. Looks great, love how the black grille looks with the contrasting flares.