New sneakers :)

[Tkalxx]

Super excited about these so I had to share... Can't wait to get my car back, and all the snow to melt

[darrenho]

Love them! What spec are you running?

[BadMojo]

Nice looking. Interested to see how they'll look. Should look killer.

[Tkalxx]

Love them! What spec are you running?

20x9.5 et40 (20mm spacers)
255/30r20

[ad2330]

20x9.5 et40 (20mm spacers)
255/30r20

Should look killer!

Are you lowered at all?

[zdriver]

Love how simple those are, in for mounted photos.

[Tkalxx]

Should look killer!

Are you lowered at all?

Not lowered.. But thinking about getting some KW h.a.s springs in the near future.

[Tkalxx]

Love how simple those are, in for mounted photos.

Thanks! just waiting for the snow to melt.....

[denis silva]

Looks good!


Sent from my iPhone using Tapatalklk

[SuperMex]

Very clean. Like them.

[Tkalxx]

Looks good!


Sent from my iPhone using Tapatalklk

Very clean. Like them.

Thanks :)

[koolade9]

255s are going to be a bit narrow on 9.5s... Have you looked into running 275/25/20s? They should be really square on those wheels...

[Tkalxx]

255s are going to be a bit narrow on 9.5s... Have you looked into running 275/25/20s? They should be really square on those wheels...

Yup. Considered 275's... As you can see in the pics, the tires are ever so slightly stretched sitting on the 9.5's.

Originally my plan was to go 275/30r20, but due to my set up, the larger tires imposed a much larger risk of rubbing.

Edit: with the 20mm spacers, the edge of the wheel actually sticks out 1mm from the fender, so you can probably see why the 275's would rub

[koolade9]

Yup. Considered 275's... As you can see in the pics, the tires are ever so slightly stretched sitting on the 9.5's.

Originally my plan was to go 275/30r20, but due to my set up, the larger tires imposed a much larger risk of rubbing.

Edit: with the 20mm spacers, the edge of the wheel actually sticks out 1mm from the fender, so you can probably see why the 275's would rub

Then why not a 15mm spacer?

[singleframe]

BOOM. subscribed!!

[Tkalxx]

Then why not a 15mm spacer?

Because of the concavity of the wheel, the spokes wouldn't clear the front calipers with a 15mm spacer

BOOM. subscribed!!

Thanks! Wheels should be mounted mid april (will post pics obviously), and KW H.A.S springs getting installed sometime this spring to really dial in that stance :)

[singleframe]

Wheels should be mounted mid april (will post pics obviously), and KW H.A.S springs getting installed sometime this spring to really dial in that stance :)

Cool..I've been thinking of going with that KW kit for some time now!! Just need to pull the trigger but house mods have taken precedence

[Tkalxx]

So happy to have my car back! New wheels are mounted and I love them so much The concave is so nice, and I think I nailed the stance...
Now all I need is to drop the car a tad (especially the front) and she'll be looking perfect.

P.S. sorry the car is dirty... new 3M was just put on and I can't pressure wash for a week.

[Blackstallion]

Very nice--lots of potential here woo wee! What route you going to go when you lower her?

[Tkalxx]

Very nice--lots of potential here woo wee! What route you going to go when you lower her?

I think I'm dead set on the KW H.A.S system. I don't want to ditch my DRC because it's held up great so far. Also, I like the height customization that comes with the KW HAS springs.

Don't want to lower it too much... Maybe a half inch to an inch

[singleframe]

Pics look great!!!! look forward to seeing the drop with the KW H.A.S. kit.

[ad2330]

Bring her back to earth and it'll look killer!

[badbluers4]

Bring her back to earth and it'll look killer!

LOL she's in space orbiting right now

[calijax]

This is good progress. I like those wheels a lot. Keep it up!

[musanoadsaba]

Tkalxx, next time you're in Canmore/Banff, you can check my KW H.A.S. out if you want.