Frankenturbo causing Cruise control trouble

[DJ_AudiA4]

I have a 2009 6MT with a frankenturbo and eurodyne tune. I hardly ever use my cruise control as I live in Los angeles and mostly travel in surface street to and from work/school. Last night I noticed that my cruise control wasn't functioning I flipped the control towards myself and the cruise control said 0 MPH and would not turn set to my speed. Could this be because of my new tune? I'm going to call the shop but with APR stage 2 my cruise control worked just fine.

Anyone with a FrankenTurbo want to chime in?

[o1turbo30v]

A mechanical turbo will not effect how your electronic cruise control works..........its the tune.

[oascom]

As far as I remember u need to press the button on the tip of the cruse control stalk to set cruise control speed first.

[DJ_AudiA4]

I know how to set cruise control, I'm assuming it's the tune. Does anyone else have eurodyne and want to chime in?

[oascom]

Ok sorry just tried to help lol

[Jerry1847]

i dont recall ever having an issue. ill try and test whenever i get my car running.

[Jerry1847]

also, did you check the fuse? im pretty sure there i a fuse just for cruse....

[DJ_AudiA4]

I opened up the fuse panel and I don't see a fuse that is labeled cruise Control or anything for the steering wheel.

[B44]

Before you play with the. Fuses. Just remove the negative terminal and put. It back in 10 mins so the system resets. Then see if problem still persist.

[Alex1188]

try reseting all adaptation values through VCDS, maybe when they did the tuning they didnt reset them, i know other people have had issues such as this when updating APR software...

[DJ_AudiA4]

Called the shop and they said it's the tune. They're looking j to with Eurodyne right now. I did check all the fuses and they were all good. On a happy side not I found the rattle in my trunk!