A4 B8 Sline springs

**BenA4B7** · 02-21-2015 01:22 PM

Found... mods you can close the thread.
Thank's

**MaXaZoR** · 02-21-2015 01:42 PM

I'll have some for sale come this spring

**BenA4B7** · 02-21-2015 02:05 PM

Originally Posted by MaXaZoR

I'll have some for sale come this spring

OK contact me when they will be available

**Grambo** · 02-22-2015 05:56 PM

Have some for sale now. They came off my 2015 s-line and only have 3k miles on them. pm if interested

**BenA4B7** · 02-23-2015 03:26 AM

Originally Posted by Grambo

Have some for sale now. They came off my 2015 s-line and only have 3k miles on them. pm if interested

Are they going to fit my 2011 ?

**Bleek** · 02-23-2015 05:45 AM

Originally Posted by BenA4B7

Are they going to fit my 2011 ?

They should.

I have a set from my 2014 S Line available as well. 4k on them. Let me know

**Grambo** · 02-23-2015 07:08 AM

Yup, they'll fit!

**vex004** · 02-23-2015 07:59 PM

bena4b7 - some good info in this thread, model vs. springs... http://www.audizine.com/forum/showth...4-Springs-help

**BenA4B7** · 03-13-2015 02:39 PM

Originally Posted by vex004

bena4b7 - some good info in this thread, model vs. springs... http://www.audizine.com/forum/showth...4-Springs-help

Well Grambo springs didn't have the same color codes....
So i'm still in the market for some springs.
My color code is for the rear: OYJ : green - gray - white and the front OJH : violet - orange

**vex004** · 03-13-2015 05:30 PM

Hey Ben - we share the same codes (oyj and ojh). However, I plan on running the following colored spring on my car [(front) 1-Violet, 3-Pink & (rear) 1-Green, 1-Grey, 2-White]. These springs should lower our cars (because we share same codes) just a tad more than the Sline springs. I'm pretty sure Grambo has the same springs for sale too. I measured these springs with my digital calipers and the thickness of the spring seems to get a little thiner as you go down on the axle load numbers compared to another set of spring I have[(front) 1-Violet, 3-Orange & (rear) 1-Green, 1-Grey, 1-Blue]

If you wanted to hold off, I can take photos of my vehicles ride height before and after installing these [(front) 1-Violet, 3-Pink & (rear) 1-Green, 1-Grey, 2-White]

**BenA4B7** · 03-13-2015 06:16 PM

Originally Posted by vex004

Hey Ben - we share the same codes (oyj and ojh). However, I plan on running the following colored spring on my car [(front) 1-Violet, 3-Pink & (rear) 1-Green, 1-Grey, 2-White]. These springs should lower our cars (because we share same codes) just a tad more than the Sline springs. I'm pretty sure Grambo has the same springs for sale too. I measured these springs with my digital calipers and the thickness of the spring seems to get a little thiner as you go down on the axle load numbers compared to another set of spring I have[(front) 1-Violet, 3-Orange & (rear) 1-Green, 1-Grey, 1-Blue]

If you wanted to hold off, I can take photos of my vehicles ride height before and after installing these [(front) 1-Violet, 3-Pink & (rear) 1-Green, 1-Grey, 2-White]

That would be great... It's for my wife's car and she's in no rush, mine is already lowered...
Thank's Man !

**BenA4B7** · 03-26-2015 03:23 PM

Ok..so i found a set of OYG OJH these are the same color codes that my wife's car... But the codes are different,what should i expect to be different are the rear height going to be lower then my OYJ OJH ???
The axle load index on mine is 9 and the one's that i find is 7...