Fitted my universal cone filter today. All seems ok.
I have a couple of queries. When I fitted it with all the air box removed the filter when fitted seems to flop to the chassis. I refitted the bottom part of the air box and cable tied around the maf to the box to help support. It's a bit **** looking. Any ideas on how I can hold it up/support it??
I have used the oem heatshield. Again, I cabled tied it around the tip and a hard metal pipe. Not happy with it but it's holding. Any ideas on either fitting the oem heatshield or how to even build one myself.
Any how here's a pic, seems to be quite cool with my current layout.
[url=http://s294.photobucket.com/user/vwgtiking/media/10DA9EB5-4F1F-4216-BCF5-FB63A81315F3_zpsg0susrar.jpg.html]
Reply With Quote
Bookmarks