Newest and biggest injector for the FSI

[ericpaulyoung]

The new RS4 injector may be the next hot ticket. They may have the spray pattern fixed.




079 906 036N


Compare ;)

[ericpaulyoung]

You will need to get a new harness off a TSI so that the connectors fit the new style.

[alphaVR]

Would be interested should it be evidenced to correct the rich conditions the B7 RS4 injectors cause on the FSI's. That's my only real complaint with the car anymore.

[Jake@JHM]

People are running 10s and low 11s with S3 injectors. I don't see a real need to go bigger yet.

[ericpaulyoung]

Jake always chimes in with his "we run 10s, there's no need" statement.


Some of us just like to work on cars and try new combinations. Hey, what can I say, I like modding.
:)

[Jake@JHM]

Jake always chimes in with his "we run 10s, there's no need" statement.


Some of us just like to work on cars and try new combinations. Hey, what can I say, I like modding.
:)

haha of course! I just try to remind people that sometimes less is more.

[mec]

Lololol if only we all had expert tuners.

Will this fit the bore in the head?

[ericpaulyoung]

Lololol if only we all had expert tuners.

Will this fit the bore in the head?

I thinky yes ;) hey even if they flow the same as the S3 but use the new multi hole tip for better atomization, you will be more efficient. Regardless of people wanting to just stay where we are now, it is always a good ideas to use more efficient designs if it is possible.

[ericpaulyoung]

haha of course! I just try to remind people that sometimes less is more.

Hehe, nah you guys just want everyone to build cars for 1/4 mike runs and post time slips. Some of us drive places other than a drag strip and look for smooth and fun daily drivers. Better atomizing nozzles can't be a bad idea IMO.

[mec]

I thinky yes ;) hey even if they flow the same as the S3 but use the new multi hole tip for better atomization, you will be more efficient. Regardless of people wanting to just stay where we are now, it is always a good ideas to use more efficient designs if it is possible.

I thought i read somewhere that DI is mostly just useful for fuel economy, there aren't many benefits to it when ti comes to making power...if thats true then wouldn't it make sense to just go with the simplest injector solution that meets your fueling goals?

[ericpaulyoung]

Picture compare added to first post.

[alphaVR]

I would need to see some concrete numbers of S3 injectors with a gt28 turbo on an FSI to determine whether its worth my while to switch tunes/injectors.

[Jake@JHM]

Hehe, nah you guys just want everyone to build cars for 1/4 mike runs and post time slips. Some of us drive places other than a drag strip and look for smooth and fun daily drivers. Better atomizing nozzles can't be a bad idea IMO.

Haha all of our cars are daily driven monsters. We spend a lot of time working on drive-aiblity on these big power builds we do and when we are done, its a smooth beast.

[ericpaulyoung]

Oh I am not trying to convince anybody to switch tunes or what not. Just bringing up an interesting option I didn't know about before.

[Andrew149]

Haha all of our cars are daily driven monsters. We spend a lot of time working on drive-aiblity on these big power builds we do and when we are done, its a smooth beast.

Is your little 2.0t a monster

[Jake@JHM]

Oh I am not trying to convince anybody to switch tunes or what not. Just bringing up an interesting option I didn't know about before.

Oh for sure! If these work its great to have more options because eventually people will need the fueling capabilities.

[Jake@JHM]

Is your little 2.0t a monster

..maybe

[Andrew149]

..maybe

I guess we'll will find out Wednesday

[Jake@JHM]

I guess we'll will find out Wednesday

Or will we?

[ericpaulyoung]

Check it out. The nozzle looks like the high end fogger tips on the newer (and more efficient) direct injection engines. Watch, within two months the shops will be offering these.

[Andrew149]

Or will we?

No flaking out on us! Like last time.

[Jake@JHM]

Check it out. The nozzle looks like the high end fogger tips on the newer (and more efficient) direct injection engines. Watch, within two months the shops will be offering these.

NEW FROM JHM ---> HIGH OUTPUT DI INJECTORS FOR THE 2.0T FSI -- CLICKY!

[Jake@JHM]

No flaking out on us! Like last time.

What last time?

[Andrew149]

What last time?

Audizine meet.

[Jake@JHM]

Audizine meet.

I can't flake if I never said I was going. I rarely go to meets.

[Andrew149]

I can't flake if I never said I was going. I rarely go to meets.

Lame. ╰_╯

What kinda car guy that doesn't go to car meets.

[Jake@JHM]

Lame. ╰_╯

What kinda car guy that doesn't go to car meets.

One who works with those same cars every day

[Andrew149]

One who works with those same cars every day

But you sit behind a desk all day!

[Jake@JHM]

But you sit behind a desk all day!

not treuz!

[Andrew149]

not treuz!

You know what, I need some parts I'm calling you.

[Jake@JHM]

You know what, I need some parts I'm calling you.

Cam followerz? Clutch?

[Andrew149]

Cam followerz? Clutch?

Full quote on clutch with install.

[Jake@JHM]

20280.9 pesos

[mec]

20280.9 pesos

Do you accept bits of string?

[Jake@JHM]

Do you accept bits of string?

Depends, those bits of string will need to be nicely woven into a perfect USD.

[mec]

Depends, those bits of string will need to be nicely woven into a perfect USD.

Injectors jake comon! This is an important matter

So EPY i can only imagine that you posting this, you have already ordered a full set of 8 and are going to sell the other 4 for a nice price :)

[ericpaulyoung]

You can get a used one to test fit for about $30. I am sure JHM has on on the way ;) when they fit, I get a free hat!! My JHM hat is actually my favorite hat. My daughter was wearing it in Home Depot a few weeks back.

[ericpaulyoung]

So EPY i can only imagine that you posting this, you have already ordered a full set of 8 and are going to sell the other 4 for a nice price :)

You already know my plans with TSI injectors. And yes the other TSI injector stuff is ordered.

[mec]

You already know my plans with TSI injectors. And yes the other TSI injector stuff is ordered.

wow she grew up quick! What is she 2 already?

I also have a JHM hat, I really like the material its made out of, I have basically the same flexfit hat both from JHm and IE, but the IE one is made of like a less elastic material and just feels weird, the jhm hat is made of wool or something weird and it fits real nice.

[Jake@JHM]

You can get a used one to test fit for about $30. I am sure JHM has on on the way ;) when they fit, I get a free hat!! My JHM hat is actually my favorite hat. My daughter was wearing it in Home Depot a few weeks back.

Haha awesome!!

I can honestly say, we are not testing any rs4 injectors