APR stage 2 problems.

[Hansel]

My car with a stasis tune only before apr stage 2 intake and apr exhaust on it went 12.94, I took advantage of the power play deal APR had pulley & stage 2 tune and went back to the track and my car now runs 13.43 @ 106 on the 93 octane map. It was 70 out and zero humidity. Do you think maybe they didn't install the tune maybe? Any ideas?

[SwankPeRFection]

Arin, WTF!? This is like the 3rd documented car running stock times on your tune.


Hansel, you have a B8, so it should have the EMACS map switching via cruise control stalk. Make sure you're running the stage 2 map.

[will13k7]

did you get the switchable one? If so, maybe its on the stock map? I got 4 maps on mine, the order I asked the shop to put them in wasn't what APR ended up giving me, double check with the pdf APR emailed if you haven't already. I asked for the 91 map in the first slot, but they ended up putting the stock map there for me.

[SwankPeRFection]

^^^ gotta love the clueless dealer that supposedly are trained and certified to install this shit.

[Hansel]

Yes, I have the "loaded" ECU. It's in the 2nd slot which is 93 octane. The thing that sucks this dealer is an hour and a half away.

[Hansel]

All I wanted was 93 octane too.

[Hansel]

did you get the switchable one? If so, maybe its on the stock map? I got 4 maps on mine, the order I asked the shop to put them in wasn't what APR ended up giving me, double check with the pdf APR emailed if you haven't already. I asked for the 91 map in the first slot, but they ended up putting the stock map there for me.

I never got a email from apr. The shop wrote the programs on the back of the instructions on how to change the programs.

[will13k7]

I never got a email from apr.

oh, maybe they stopped doing that, I guess you could double check with APR. Have you tried switching them yourself yet? Maybe the shop left it in the wrong slot?

Do you have a boost gauge? you should be close to 16PSI when your on the Stage2 map. That's usually how I tell, unless its a cold start in the morning since I have the version with the cold-start routine delete.

[Hansel]

I don't have a boost gauge, I was going to change the slot but didn't know what the outcome would be if I put it in the 104 file with 93 in the tank. Hopefully this can get fixed, didn't spend 1800 to go slower. Lol

[SwankPeRFection]

Whatever happened to just getting a single damn tune on the ECU? What if you don't want map switching and you just want a single 93 or 91 tune? Can APR or GIAC for that matter accommodate just that and not code you with all the map switching logic they add on?

[Hansel]

Whatever happened to just getting a single damn tune on the ECU? What if you don't want map switching and you just want a single 93 or 91 tune? Can APR or GIAC for that matter accommodate just that and not code you with all the map switching logic they add on?

For me that would be perfect. I really wonder how many people run 100 or 104?

[cspcrx]

When did you get the tune? Seems like others that report slow cars have it suddenly come to life after a few hundred miles.

[Hansel]

Oh it's been maybe 2,000 miles or so.

[will13k7]

Can APR or GIAC for that matter accommodate just that and not code you with all the map switching logic they add on?

You can get a single map, you usually have to pay more for the switching and other maps, but during the summer/spring/winter/fall sales, you get them for free.

[ride1157]

I got rid of my APR tune w/in the 30 day period after spending 2200 bucks and only getting a best time of 12.79 @ 107 on my 2014 and it threw a code or fuel pressure regulator. New car, read a couple others had the same code after getting tuned. I'm done w/ APR unless they can come out and say there is a fix for the 2014's... I only got 1169 back from that deal and totally dumped 1000 bucks on nothing... (pulley but useless w/o a tune). GIAC needs to put out a V2 for the b8.5 GRRRR!

[Hansel]

I got rid of my APR tune w/in the 30 day period after spending 2200 bucks and only getting a best time of 12.79 @ 107 on my 2014 and it threw a code or fuel pressure regulator. New car, read a couple others had the same code after getting tuned. I'm done w/ APR unless they can come out and say there is a fix for the 2014's... I only got 1169 back from that deal and totally dumped 1000 bucks on nothing... (pulley but useless w/o a tune). GIAC needs to put out a V2 for the b8.5 GRRRR!

That sucks. I have 1700 in a stasis tune and 1800 on this one and my car is a slow as it was day one from the dealership.

[USAFS4]

Your times indicate running a stock tune. You can try switching around the tunes to see if there is a difference, even on the race gas tune, with just 93 in the tank. The ECU will not blow up your motor in race gas tune with 93, it will just pull timing if it detects knock. If two or three tune positions feel the exact same, then either the dealer screwed up or maybe you have a code. Need to VAG com it.

[MrFunk]

You had to go to the track to notice your car was slower?
Or you went to the track to document that it was slower?

My thoughts:
You are running the stock file... the other files probably didn't load and all you have loaded is the stock file... you can be selecting pump/race but if all you have is stock it makes no difference.
Road trip back to the shop and have them reload it.

I'd want some sort of discount from the shop for the inconvenience if this is the case...

[PSUGOLD]

Is something going on lately? My Stage 2 GIAC ran a massively fast 13.6 at 105. I took it back to AWE to see what the heck was going on, they ran a buncha tests, came back and told me everything looks good and matches up with other Stage 2 GIAC cars, and charged me $150 while I sat there for 4+ hours waiting for them to tell me everything was fine. 13.6 at 105 for a Stage 2 is not fine, not when it was the BEST of 8 runs too. Cannot say I am too happy either these days.

[audistealth]

Times are as much the driver as the transmission, tires, and tune.

GIAC had a handheld switcher, just push the well labeled button when collected over OBD2 and the new map is active.

Both major tuners sell single maps or multiple maps. I have never switched out of GIAC v2 93 octane.

[saxon]

Is something going on lately? My Stage 2 GIAC ran a massively fast 13.6 at 105. I took it back to AWE to see what the heck was going on, they ran a buncha tests, came back and told me everything looks good and matches up with other Stage 2 GIAC cars, and charged me $150 while I sat there for 4+ hours waiting for them to tell me everything was fine. 13.6 at 105 for a Stage 2 is not fine, not when it was the BEST of 8 runs too. Cannot say I am too happy either these days.

At least they logged the car, I'm sorry but I didn't know stage 2 was 13 psi

[F40LM]

Sorry to hear that hansel. I would demand a reflash. Im going giac stg 2 next week. Hoping i dont experience similar haha.

[AKPS4]

Any chance poor quality gas could be the culprit? This includes old gas, bottom of tank, from Mobil, Shell, etc. just throwing out options.

I did the stasis to APR switch and I def noticed some power increase low end for sure and a bit at the high end.

[Hansel]

You had to go to the track to notice your car was slower?
Or you went to the track to document that it was slower?

My thoughts:
You are running the stock file... the other files probably didn't load and all you have loaded is the stock file... you can be selecting pump/race but if all you have is stock it makes no difference.
Road trip back to the shop and have them reload it.

I'd want some sort of discount from the shop for the inconvenience if this is the case...

I had a feeling it was, I did call APR two days after the flash was done. I explained to them that the car didn't feel that fast and to make sure it was in the 93 octane flash. They walked me through making sure it was in the right program. Which I did verify it was in slot 2. But the one salesman told me it takes some miles for the flash to adapt. Which makes no sense to me. I know on my x5m & 911 turbo once the flash was done thy made a lot of power. I figured maybe what he told me was correct so I never thought twice about it. Well now I know I was right but taking it to the track and seeing the ET's and the Trap speed.

Slot 1 - stock
Slot 2 - 93
Slot 3 - 100
Slot 4 - 104

It's my DD so I really don't rag on it all the time, so I really haven't " tested it" I guess compared to my other cars it's slower. So i really don't feel the need to rag on it too much. But it would be nice to make some 11 second passes in it.

[Hansel]

Any chance poor quality gas could be the culprit? This includes old gas, bottom of tank, from Mobil, Shell, etc. just throwing out options.

I did the stasis to APR switch and I def noticed some power increase low end for sure and a bit at the high end.

Shell 93 only. So I doubt that's it.

[Hansel]

Sorry to hear that hansel. I would demand a reflash. Im going giac stg 2 next week. Hoping i dont experience similar haha.

I'm going to get in touch with apr first. Before I drive form burr ridge to lake Zurich for a reflash. You know how far that it.

[Hansel]

Times are as much the driver as the transmission, tires, and tune.

GIAC had a handheld switcher, just push the well labeled button when collected over OBD2 and the new map is active.

Both major tuners sell single maps or multiple maps. I have never switched out of GIAC v2 93 octane.

It's not the driver. Lol.

[Hansel]

I found a old time slip too. 60' was 1.65 now 2.02.

[jl87]

Do you know if the shop cleared all the faults after the flash finished? It creates a lot of communication errors with modules and if they aren't cleared the car could possibly not be 100%. If you have anybody near you w vagcom do a full scan and see if it has anything come up.

[Hansel]

Do you know if the shop cleared all the faults after the flash finished? It creates a lot of communication errors with modules and if they aren't cleared the car could possibly not be 100%. If you have anybody near you w vagcom do a full scan and see if it has anything come up.

I'm in Chicago, maybe someone on here does. I'd be willing to pay them to see what's up.

[adbender]

Stock vs 93 map should be obvious. Do some runs up to redline. It should pull like a bat out of hell past 5000.

[audistealth]

Stock vs 93 map should be obvious. Do some runs up to redline. It should pull like a bat out of hell past 5000.

That pull starts hard around 3000 :)

Love this car.

[jl87]

If you got fully loaded you should have also gotten fault code erase. I don't know if this method will clear everything the same, but it's worth a try and something you can do right now. Instead of pressing and holding the button to switch maps, pull the entire stalk towards you. Do one, then the other.
1 blink = fault code erase

2 blinks = throttle body alignment ( can also try this one, car would then "relearn" your driving habits) car must be cold for this.

[Hansel]

Stock vs 93 map should be obvious. Do some runs up to redline. It should pull like a bat out of hell past 5000.

Doesn't pull hard at all.

[Hansel]

If you got fully loaded you should have also gotten fault code erase. I don't know if this method will clear everything the same, but it's worth a try and something you can do right now. Instead of pressing and holding the button to switch maps, pull the entire stalk towards you. Do one, then the other.
1 blink = fault code erase

2 blinks = throttle body alignment ( can also try this one, car would then "relearn" your driving habits) car must be cold for this.

I'll head out to the garage to give that a whirl now.

[Gotchaa]

At least they logged the car, I'm sorry but I didn't know stage 2 was 13 psi

Here is what you should be getting PSI wise via Stage 2 GIAC, I believe this was even before v2. It's a recording straight from analog boost tap to PLX device SM boost vac module, not from the OBD2 port:
http://youtu.be/jwNADtcDbdc

[Ray Khan]

The engine log shows 13.6 psi at 5900 rpm so it's no behaving like stock. Hat being said its venting some boost so there is an issue. It would be worth logging timing pull.

[SwankPeRFection]

I got rid of my APR tune w/in the 30 day period after spending 2200 bucks and only getting a best time of 12.79 @ 107 on my 2014 and it threw a code or fuel pressure regulator. New car, read a couple others had the same code after getting tuned. I'm done w/ APR unless they can come out and say there is a fix for the 2014's... I only got 1169 back from that deal and totally dumped 1000 bucks on nothing... (pulley but useless w/o a tune). GIAC needs to put out a V2 for the b8.5 GRRRR!

That's bullshit dude! Arin, this is crap business from you and YOUR dealers. Your dealer should have returned this guy's car back to stock and returned all his money. I don't care if he went Stage 2 and they had to do more of an install than just a 30 minute flash. Anything less and it's crap of you not standing behind your product.

I would have raised hell had I burned 1k for nothing. This is why I can't stand these loser companies sometimes. You rip people off by not crediting everything back, labor or not!

[SwankPeRFection]

Do you know if the shop cleared all the faults after the flash finished? It creates a lot of communication errors with modules and if they aren't cleared the car could possibly not be 100%. If you have anybody near you w vagcom do a full scan and see if it has anything come up.

Fault codes can be cleared via the cruise stalk with APR too. Either that or just pull the battery. That still works.

[audistealth]

Fault codes can be cleared via the cruise stalk with APR too. Either that or just pull the battery. That still works.

LOL, yes. I'd imagine the battery trick still works.