Show Us Your Wheels - 20"

[Amaxwell5]

20x10 adv05


Sent from my iPhone using Tapatalk

[lobosmd]

20x10's - b2forged, they dont disclose the offset, custom made to order. But they did manage a lot of concave in the front while clearing that brake :)

tires are 275/30/20 *4

thanks for the info

[Michael.PL]

Hello Gentleman,

It's probably not the right thread, but I can not find a better one. Thank you for understanding.
I just bought a 2015/16 model A6 C7 AVANT with S-line package and s-line suspension. I found these A8 wheels 9x19 ET33 (part no. 4H0 601 025 G) that suits me veeery much - picture attached.
Using some offset calculators, I'm comparing them to a quite popular in here 20x9 ET35 size, and it seems it's just 2mm difference.
Can someone confirm they will fit my car? Considering 255/40 tire...

I would be really greatful for an answer... or pointing me to a right thread.

BR,
Michael

[Carl Weathers]

[07S6]

P

Hello Gentleman,

It's probably not the right thread, but I can not find a better one. Thank you for understanding.
I just bought a 2015/16 model A6 C7 AVANT with S-line package and s-line suspension. I found these A8 wheels 9x19 ET33 (part no. 4H0 601 025 G) that suits me veeery much - picture attached.
Using some offset calculators, I'm comparing them to a quite popular in here 20x9 ET35 size, and it seems it's just 2mm difference.
Can someone confirm they will fit my car? Considering 255/40 tire...

I would be really greatful for an answer... or pointing me to a right thread.

BR,
Michael

I don't see any reason why they wouldn't fit.

[MileMan402]

Hello Gentleman,

It's probably not the right thread, but I can not find a better one. Thank you for understanding.
I just bought a 2015/16 model A6 C7 AVANT with S-line package and s-line suspension. I found these A8 wheels 9x19 ET33 (part no. 4H0 601 025 G) that suits me veeery much - picture attached.
Using some offset calculators, I'm comparing them to a quite popular in here 20x9 ET35 size, and it seems it's just 2mm difference.
Can someone confirm they will fit my car? Considering 255/40 tire...

I would be really greatful for an answer... or pointing me to a right thread.

BR,
Michael

You should be fine. I'm running A8 wheels that are 20x9" et 46. I have 10mm spacers in the front and 15mm in the rear so effective et's of 36f and 31r. I could probably go another 3mm in the front without rubbing, but it would be close. The rear I could give up 2mm and it would still be flush. I'm running the stock 255/35 pzero.

[Michael.PL]

You should be fine. I'm running A8 wheels that are 20x9" et 46. I have 10mm spacers in the front and 15mm in the rear so effective et's of 36f and 31r. I could probably go another 3mm in the front without rubbing, but it would be close. The rear I could give up 2mm and it would still be flush. I'm running the stock 255/35 pzero.

That's the answer and comparison I was hoping for...
PS. Great looking speciment...

P

I don't see any reason why they wouldn't fit.

Me too, but I wanted to be perfectly sure and ask the source :)


This way or the other, a nice welcoming, thank You!

[tim19910510]

RS5 V-spoke 9j, ET26


With the winter wheels.

[kuattroo]

RS5 V-spoke 9j, ET26


With the winter wheels.
[URL=http://s842.photobucket.com/user/rare-oakley/media/IMG_7580_zpshitjmda3.jpg.html]

The winter wheels look pretty good Mane

[Tomcat-R]

These are mine Titan Matt 20" OEM. To my personal taste, the car rides much better on 20" compared to factory-installed 19" - sharper, but still very comfortable.

[JoeCaMotto]

These are mine Titan Matt 20" OEM. To my personal taste, the car rides much better on 20" compared to factory-installed 19" - sharper, but still very comfortable.

I like the look of the new sports package wheels.

[SuperBeaver]

You should be fine. I'm running A8 wheels that are 20x9" et 46. I have 10mm spacers in the front and 15mm in the rear so effective et's of 36f and 31r. I could probably go another 3mm in the front without rubbing, but it would be close. The rear I could give up 2mm and it would still be flush. I'm running the stock 255/35 pzero.

Hi, I am running the same S8 forged rims 20x9 but seems that offset is a bit different, don't remember exactly. Thinking of spacers 12-15 mm all around. Car is lowered by coils.

[MileMan402]

Hi, I am running the same S8 forged rims 20x9 but seems that offset is a bit different, don't remember exactly. Thinking of spacers 12-15 mm all around. Car is lowered by coils.

Mine were off a D3 so I had to have the center bores enlarged. The offset might be different if you got them off a D4 which would've come with the proper center bore

[SuperBeaver]

Mine were off a D3 so I had to have the center bores enlarged. The offset might be different if you got them off a D4 which would've come with the proper center bore

Exactly, mine goes with DIA 66,6 and offset closer to 33 or 36 i suppose. Anyway need spacers and go a bit lower🏻

[MileMan402]

The offset is stamped on the inside of the wheel

[SuperBeaver]

The offset is stamped on the inside of the wheel

For sure i know, i just forgot what was that.

[MileMan402]

Exactly, mine goes with DIA 66,6 and offset closer to 33 or 36 i suppose. Anyway need spacers and go a bit lower��

Your offset is probably mid 40's like mine were. If they mid 30's they would sit flush like mine. If I had to do it again I would do 12mm front and rear I think. Or 10 front and 12 rear.

[SuperBeaver]

Your offset is probably mid 40's like mine were. If they mid 30's they would sit flush like mine. If I had to do it again I would do 12mm front and rear I think. Or 10 front and 12 rear.

I agree 12. Hope to find some time soon and get to it.

[dennisg]

Ah here are my HRE p101 again in 20". :-)

[dennisg]

I don't know if anyone has seen this site but you can superimpose wheels over a photo of your car. Pretty cool stuff!

http://www.vividracing.com/catalog/wheel_app.php

[Glacier6]

These will be going on shortly....




Sent from my iPhone using Tapatalk

[VeryBadman]

This is mine.

[Mister_T_]

[IMG][/IMG]

[JoeCaMotto]

Ah here are my HRE p101 again in 20". :-)

My favorite wheels, I love the P101's to bad the road are terrible around Chitown

[carymac]

20x10.5 Velgen VMB5 Wheels et25 all around.
Tires 285/30/20 Hankooks


Sent from my iPhone using Tapatalk

[MikeDwerks]

Stockers :)

[skalle]

Rotor replicas 20 x 9" ET 35


Skickat från min iPhone med Tapatalk

[EYE4SPEED]

HRE 891R, 20x10, +32, matte charcoal centers and satin charcoal staggered lips, 275/30 tires; needs a little lower (springs) and wider (285/30 on next set of tires)



20" stock wheels, 265/35 tires

[Sd76]

These will be going on shortly....




Sent from my iPhone using Tapatalk

Waiting to see these def!!!!!


Sent from my iPhone using Tapatalk

[Glacier6]

Waiting to see these def!!!!!


Sent from my iPhone using Tapatalk

Scheduled to be installed on Wednesday! Couldn't be any more anxious

[SuperBeaver]

Rotor replicas 20 x 9" ET 35


Skickat från min iPhone med Tapatalk

Cheers to Avant :)

[Sd76]

Scheduled to be installed on Wednesday! Couldn't be any more anxious

Pics immediately!


Sent from my iPhone using Tapatalk

[dennisg]

My favorite wheels, I love the P101's to bad the road are terrible around Chitown

you think Cleveland roads are like Florida?? 20's can take it, but you have to keep your eyes peeled. I tried S101 in 21 first and that was a bad idea. P101 are stronger than S101, not to mention like 9 pounds lighter, helping them to move up quickly off bumps

[robwny]

Just got my 20s GF06 with black tint
& hankook V12


Sent from my iPhone using Tapatalk

[kj71109]

HRE 20x9 ET35 FF01 Liquid Silver 255/35/20 Conti DWS. OEM non sport height:

[Leandro]

Sent from my iPhone using Tapatalk

[Glacier6]

Finally on the ride...would like a little more aggressive stance so may need to go with some larger spacers. Also need to wrap the window trim.










Sent from my iPhone using Tapatalk

[JoeCaMotto]

I like the look, wheels look great

[SharkNardo]

RS6 reps, 20X9 ET35

[IMG][/IMG]

[Glacier6]

Glacier6- looks good. Specs?

Thanks Pandi! 20x10 ET40, however needed 5 mm spacers all around to clear the brakes. Stuck with 265/35/20 Conti DWS....slight stretch but nothing major or anything that would cause me to think twice.