Pes whipple 140ax for rs4 in final steps

**Quattrors4** · 03-20-2014 12:49 PM

Still needs to be powder coated

**jeffrey146** · 03-20-2014 01:08 PM

Is this going to blow motors like all the other PES products?

**washyourrhands** · 03-20-2014 01:34 PM

Originally Posted by jeffrey146

Is this going to blow motors like all the other PES products?

hahahahahahhaha

**Whatset** · 03-20-2014 01:52 PM

sweet...gonna get motodyne to tune it up all tight

**NastyNogaro** · 03-20-2014 01:57 PM

This should be a very entertaining thread. Subscribed!

**KryptoniK** · 03-20-2014 02:04 PM

Quattrors4 are you having that kit installed on your RS4?

For the record, my motor never blew with the PES M90 kit on it. Then again I had to have Unitronic get involved to properly tune the kit.

**Quattrors4** · 03-20-2014 02:36 PM

Yes it's getting installed in my rs,a few rs5 already have it with fantastic results

**Quattrors4** · 03-20-2014 02:39 PM

I put 20k Miles's on there mp 112 ! With no problems what's over, tony is a great guy

**KryptoniK** · 03-20-2014 02:41 PM

Nice, congrats! Look forward to reading your review.

**Mistro** · 03-20-2014 02:53 PM

Cool, looking forward to updates. Who's tuning it?

**denis silva** · 03-20-2014 02:56 PM

Nice really want to see final results!

Sent from my iPhone using Tapatalk

**Lout Jnr** · 03-20-2014 03:22 PM

Originally Posted by Quattrors4

Yes it's getting installed in my rs,a few rs5 already have it with fantastic results

What results, that isnt a picture of a dyno????

**jfunkey** · 03-20-2014 03:29 PM

Hahahah PES where getting it right the first time ....... Or second time . ...... Or third time isn't as important as giving these guys that post rock bottom prices in hopes of getting a few more customers before you figgure out it still sucks....good to see the 4th version of the pea kit.....and go figgure still no testing.....

PES where the only guarantee is you'll get scammed.

**Quattrors4** · 03-20-2014 04:41 PM

12 psi ,everything stock

**Flying Tomatoes** · 03-20-2014 04:59 PM

Fabspeed is right around the corner from me. Can we meet up so I can see this in person?

**swesna** · 03-20-2014 05:32 PM

Originally Posted by Flying Tomatoes

Fabspeed is right around the corner from me. Can we meet up so I can see this in person?

lets see how fast he responds...I remember that last person that got the PES and he was in PA and NJ a few times and never met up. That guy that thought he was a chef I believe in a food truck.

**Quattrors4** · 03-20-2014 05:48 PM

The dyno is from an rs5 ! My car is not done yet , it's just to show the potential of the ax 140

**wahpao** · 03-20-2014 06:39 PM

And they are suggesting Milltek exhausts to go with their kits.
Are you their first customer to run this setup on the RS4?

**jfunkey** · 03-20-2014 09:58 PM

Originally Posted by Flying Tomatoes

Fabspeed is right around the corner from me. Can we meet up so I can see this in person?

FT maybe hit the dyno with your car and see where it's at. Hate to say this but pes 12psi on that blower I don't see 500whp happening. Something sounds fishy. One post you show us parts that you say need powder coating but if you look at the parts the intake can't even bolt to anything... there are no holes in the flange....now you post a dyno sheet...we have all seen this before...

**BenSti** · 03-20-2014 10:06 PM

Originally Posted by jfunkey

FT maybe hit the dyno with your car and see where it's at. Hate to say this but pes 12psi on that blower I don't see 500whp happening. Something sounds fishy. One post you show us parts that you say need powder coating but if you look at the parts the intake can't even bolt to anything... there are no holes in the flange....now you post a dyno sheet...we have all seen this before...

It actually runs 14.5psi.

**Quadfreak** · 03-20-2014 11:10 PM

Originally Posted by jfunkey

FT maybe hit the dyno with your car and see where it's at. Hate to say this but pes 12psi on that blower I don't see 500whp happening. Something sounds fishy. One post you show us parts that you say need powder coating but if you look at the parts the intake can't even bolt to anything... there are no holes in the flange....now you post a dyno sheet...we have all seen this before...

Except the first pictures he posted are RS4 parts, and the dyno sheet is from an RS5...not the same motor, totally different parts. And dont you think that maybe these kits are still made to order and they dont have a stack of parts wating to be installed on cars yet?? I mean, I get this song and dance has been done before, but come one...at least give the dude more than a few hours before you jump down his throat...He did say it is in the 'finishing stages'

**tadhgbrosnan** · 03-21-2014 05:07 AM

Originally Posted by Quattrors4

I put 20k Miles's on there mp 112 ! With no problems what's over, tony is a great guy

Where in MA are you? I'd love to check out your car.

**dparm** · 03-21-2014 07:07 AM

Workmanship looks top-notch on that.

**Quattrors4** · 03-21-2014 11:16 AM

To make the whipple fit on the rs4 took a lot of designing and engeneering,nothing needs to be cut or moved !

**washyourrhands** · 03-21-2014 11:26 AM

the amount of information in this thread is overwhelming!

**xalfa** · 03-21-2014 12:57 PM

Originally Posted by Quadfreak

...at least give the dude more than a few hours before you jump down his throat...

But that would go against everything we stand for here at AZ. Flame first, think later!

**Quadfreak** · 03-21-2014 01:21 PM

Originally Posted by xalfa

But that would go against everything we stand for here at AZ. Flame first, think later!

You're right...what was I thinking..

--€
--€
--€

I brought some extra pitchforks

Sent from my HTC6435LVW using Tapatalk

**Flying Tomatoes** · 05-07-2014 04:34 PM

Is this project still alive?

**Jake@JHM** · 05-07-2014 04:37 PM

http://audirevolution.net/forum/index.php?topic=2504.0

**PurpleHeartRS4** · 05-07-2014 06:16 PM

^ Looks like people are going to get boned.

**washyourrhands** · 05-08-2014 09:32 AM

yikes

**jdmnomore** · 05-08-2014 09:59 AM

Yet another reason why dyno sheets, while not completely useless, are not good marketing tools or valuable when shopping for power adders. The thing about quarter mile slips, is the car actually has to exist to make it to a strip and the kit has to actually perform to put down good numbers. God knows where these dynos came from or how valid they are. Dyno sheets are a scam companies number 1 marketing tool period.

**daytonars4** · 05-08-2014 11:23 AM

Someone can fudge a 1/4 just as they can a dyno. So having both a 1/4 and dyno together is bad bc? ......

**Jake@JHM** · 05-08-2014 11:27 AM

Originally Posted by daytonars4

Someone can fudge a 1/4 just as they can a dyno. So having both a 1/4 and dyno together is bad bc? ......

It is easier to prove your 1/4 is legit. Such as a non cut video with showing the car make the pass and then come back around showing full interior, installed mods, etc..

Unless you are referring to sand bagging which would only hurt results.

**Flying Tomatoes** · 05-08-2014 11:35 AM

Originally Posted by jdmnomore

Yet another reason why dyno sheets, while not completely useless, are not good marketing tools or valuable when shopping for power adders.

What do you mean? They posted a time slip too?

Now you believe, right?

**daytonars4** · 05-08-2014 11:37 AM

Originally Posted by Jake@JHM

It is easier to prove your 1/4 is legit. Such as a non cut video with showing the car make the pass and then come back around showing full interior, installed mods, etc..

Unless you are referring to sand bagging which would only hurt results.

True. But I just haven't heard anyone say why having 1/4+dyno is so bad. The argument seems to always take the turn of 1 vs the other. Usually when I see 1/4 times it's a slip not a video documentary of the detail of the run. I know that's what JHM does, just saying it's not the normal standard.