The right tire for OEM B7 RS4 rims

[RS4in206]

Hey all,

Just looking for a little advice. Im going to slap on some OEM RS4 rims and was hoping for a little help selecting the right tire. My setup is PSS9 coilovers and will be running 18z's up front. The RS4 rims are 19x9 et 29 but I plan to use spacers to make it flush. I did some research and saw other guys using 255/40/19s. Im looking for a little tuck of the tire. Thoughts?

TIA

[8520]

Have you looked through the wheel pic thread? Some good info in there.

And this thread I started on qw a while back

http://forums.quattroworld.com/allro...ds/12973.phtml

A pic of nogaro nitwit's car on 19x9.5, 255/40/19



Allroad with 19x9 effective et17 245/40/19

[RS4in206]

Yea I did see a few of these already. I guess its just so hard to know exactly how its going to turn out. Most of the examples I saw were of people still on bags. The highest setting on the C/O's will essentially put me more than an inch lower than stock level 1 so I had concerns how that would play into it. Im currently running 20mm spacers on the stock 17" twin spoke and it pokes just right =) I'll probably need to go to 15mm spacers up front since the new rims are et 29. Thanks for the links though!