S84.2 cam swap into A64.2 manual 6spd euro S6 recoded ecu

[A864.2]

Would like a definite answer on this,can the D2S8 cams be swapped into the A64.2 without having to use the S8 rockers also. Is it a remove old cams and replace with S8 cams and button her up. My car is an 01A64.2 manual swap 6speed soon to be picking up S8/6 intake and want to do the cams, just don't want to have to do an entire heads swap if it's not absolutely necessary.Any CT techs around for this one? Thank you in advance for any help

[jmcS4]

I've read it's not worth the time and money. But I've never seen anyone actually do this

[A864.2]

Thats why im trying to get a definite answer about the cams alone or cams and rockers Just like swapping auto to 6speed it is possible and I have had it done. With the cams its all mechanical so achieving a 60Hp bump to the A64.2 300HP should be straight forward.I will post any updates as they change,but I will get it done..

[rsfaux]

theres a couple dudes in your area that are pretty familiar with the 4.2 and modding it let me see if i can get them in here.

[Vinnie981]

are you going to post this same thread in every forum

[A864.2]

Trying to get an answer didn't know I shouldn't. Normally I see post that get a lot of views and no replies I just wanted to up my odds. , I'm not well rounded with forum edict wont happen again. Thanks