Fun audi stuff at the shop.

[vwgti16vt]

Hey guys! As a few of you know my wife and I own a shop called Parts Score. We were located in Tempe for 3 1/2 years and recently moved up to the Scottsdale Airpark. We specialize in Audi, BMW and VW performance and maintenance. I wanted to post up some pics of a few of the Audi performance projects we have been going. No particular order. Enjoy!

(We do a lot of BMW and VW performance as well, but who cares about that.... this is an Audi forum!!!)


B7 S4 pre cat gut:





B8 S5 V8 H&R springs, 20" OEM wheels & Spacers:

[vwgti16vt]

D3 S8 Milltek exhaust install:







B7 S4 034 rear swaybar:

[vwgti16vt]

B7 S4 pre cat gut, Stasis exhaust and cross drilled front rotors w/ Hawk pads:

[vwgti16vt]

B7 S4 JHM intake manifold spacers:







B8 S5 3.0T H&R Springs:

[vwgti16vt]

2014 B8 Allroad (w/ 300 miles) getting H&R coilovers, AWE exhaust and 20x10 Vossens:

[irulea2]

I've had Jason work on a couple of my Audis. He's an honest guy and does great work. I highly recommend him!

[azquattr0]

Do you guys do timing belts as well? i just bought an 04 a6 2.7t with 94k yesterday and need a reputsble shop to perform what i hear is a pain in the ass job.

[vwgti16vt]

Do you guys do timing belts as well? i just bought an 04 a6 2.7t with 94k yesterday and need a reputsble shop to perform what i hear is a pain in the ass job.

Absolutely! We do all scheduled maintenance!
Just sent you a PM

[vwgti16vt]

As I mentioned, in addition to performance, we can take care of all your maintenance needs.
We'll all seen oil changes, brake jobs, shock replacements and timing belt services so here's a timing belt service on something a little less common.

This is a C5 RS6 with a Twin Turbo Charged V8. These engines are amazing and so is their maintenance schedule! Timing belts are replaced every 30K miles!
This customer went about 45k since his last service. As you can see in the pics his timing belt tensioner had begun to fail. Very lucky it didn't slip the belt before he made it in.



Service position:



Failing tensioner causing excess slack T-Belt


All put back together:

[FuchsB]

I've had Jason work on a couple of my Audis. He's an honest guy and does great work. I highly recommend him!

+1 I highly recommend Jason. He’s a great guy whose extremely knowledgeable and honest.

[PhxPhil]

Can't seem to google the shop. Need a dependable shop. HMU.

[FuchsB]

Can't seem to google the shop. Need a dependable shop. HMU.

Here is there info.





Sent from my iPhone using Tapatalk

[vwgti16vt]

Been a while. Here's a few highlights...

Had this beautiful fully optioned 2013 A5 S-line in. The owner is a died hard Audi enthusiast. The car was in to swap out a set of H&R springs for H&R coilovers and install a set of OEM european spec headlights (no orange side markers)

Fresh set of H&R coilovers


install:





Stock US spec headlight with DOT required ugly orange reflector


E-Code sexiness!





Per the owners request we have the H&R coilovers turned down extra low!! The new lower stance plus the e code headlights takes an amazing car to another level IMO

[JBrookie]

How difficult is that Pre Cat gut on a B6 3.0? Or would it just be better to cut out the pre cat and install pipe? My right cat has begun to fail at 91K

[vwgti16vt]

How difficult is that Pre Cat gut on a B6 3.0? Or would it just be better to cut out the pre cat and install pipe? My right cat has begun to fail at 91K

That's a little tricky to answer. Its mostly will depend on your experience and what tools you have access to in addition to how much time you're willing to spend on the project. There are some tight spots in the engine bay but with a little patients you can remove them in your garage and gut the inside of the cats. Once they are gutted you'll either need a tune the tunes out the post cat O2's or you can run an O2 sensor spacer. The O2's sensor spacer works in most cases.

[vwgti16vt]

2014 A4 S-Line 2.0t Quattro Manual!!!
This car came in with a little 600 miles and it's off to a great start with a set of H&R coilovers

A real 6spd car. A rare bird for sure!


that OEM fender gap!!




install:




Coilovers installed and looking good with the new stance. We have many more mods in store so this will be an ongoing project!

[430hps4]

Tell your customer, when they go through the Costco Car Wash, to ask them to turn off the tire shine. I recognize that sling anywhere!!! :)

[JBrookie]

That's a little tricky to answer. Its mostly will depend on your experience and what tools you have access to in addition to how much time you're willing to spend on the project. There are some tight spots in the engine bay but with a little patients you can remove them in your garage and gut the inside of the cats. Once they are gutted you'll either need a tune the tunes out the post cat O2's or you can run an O2 sensor spacer. The O2's sensor spacer works in most cases.

I would still want cats. Need to pass emmisions after all. I just have read that the main problem with B6 3.0 cats is the pre cat. So my thought is get rid of the pre cat (or gut) and put in universal hi flow cats in place of the stock ons.

[vwgti16vt]

2012 B8 A4 2.0t Quattro Manual!!
This customer was interested in more power.
We supplied him with an APR stage 2 tune with 91 and 100 octane options, Billy Boat Downpipe/ Test Pipe, OEM R8 Coilpacks, APR Intake and a few VAGCOM coding mods

[vwgti16vt]

This car was extra Fun to build.
2009 Audi S5 V8 Manual getting a full AccuAir B8 Kit, RS5 Grill and BIlly Boat Exhaust, APR Intake and Vossen CV-1's in 20x10.5.

[vwgti16vt]

Trevor brought his extra clean B7 A4 2.0t in for a Timing Belt service. Belt, Tensioner, Roller & Water Pump

[irulea2]

Hey buddy. Text me when you have a chance. I'm looking to bring in my rs4.

[dunebug81]

Im curious what that S5 job cost. Wow it looks sick! its SOOO low, I could never have a car that low.

I wish you were in Vegas cause there are a few things Id like to do to my car.

[Static_B6]

Jason! I'm glad I found you on here. I sent you a message on FB but didn't get a response. You have a PM!