:: ECS Tuning :: B6 S4 Complete Control Arm Kits - $289.95!!

**ECS Tuning-Audi** · 02-26-2014 09:22 AM

Not sure where your Audi is headed when you cut the wheel? Creaking bushings and loose ball joints can turn your sport sedan into a groaning wanderer in as few as 50,000 miles.

If you're tired of noisy suspension bushings and vague steering, take the loud and loose out of your suspension with a new front control arm kit. Complete assembly includes tie rod ends and all installation hardware.

A single source suspension solution.

No more creaks or groans

Click HERE to order or for more information

FITS:
Audi B6 S4 2004-2005

Let me know if you have any questions.

Jason

**SurferD** · 02-28-2014 09:16 AM

What about B7?

Sent from my iPhone using Tapatalk

**ECS Tuning-Audi** · 02-28-2014 09:41 AM

Originally Posted by SurferD

What about B7?

Sent from my iPhone using Tapatalk

Unfortunately we do not have a complete kit priced like these for B7. I believe the lower control arms are slightly different for B7, that being said we do have the URO upper control arm kits available for B7 A4/S4 below.

Click HERE to order or for more information

Jason

**SurferD** · 02-28-2014 05:35 PM

OK thanks Jason

**masaraksh** · 03-10-2014 06:28 AM

Hey,

Is this deal still available?

Would like to ask my shop about these vs. Meyle.

**ECS Tuning-Audi** · 03-10-2014 06:45 AM

Originally Posted by masaraksh

Hey,

Is this deal still available?

Would like to ask my shop about these vs. Meyle.

It is indeed! This pricing isn't changing anytime soon!

Jason

**j2ther** · 03-10-2014 09:48 AM

I need a set of uppers too. Interested in the quality of these vs Meyle etc. Anybody have any input?

Originally Posted by masaraksh

Hey,

Is this deal still available?

Would like to ask my shop about these vs. Meyle.

**PackMan33** · 03-10-2014 12:38 PM

Originally Posted by ECS Tuning-Audi

It is indeed! This pricing isn't changing anytime soon!

Jason

I see that it's no longer available on the site. Is this just a forum deal? I need new tie rods and control arms. Pot holes in the North East did me in.

**masaraksh** · 03-14-2014 02:12 PM

Talked to my trusted euro shop. They recommended against these... That quality is sub par compared with something like Meyle.

**ECS Tuning-Audi** · 03-14-2014 02:23 PM

Originally Posted by PackMan33

I see that it's no longer available on the site. Is this just a forum deal? I need new tie rods and control arms. Pot holes in the North East did me in.

Should be back up and good to go with an ETA!

Originally Posted by masaraksh

Talked to my trusted euro shop. They recommended against these... That quality is sub par compared with something like Meyle.

Of course a shop is going to tell you anything else they don't sell is not recommended. They make a pretty good amount on parts so they will always push for you to buy through them. It's the same reason why many shops wont install third party purchased parts as well.

Jason

**drdljones** · 03-22-2014 04:34 PM

Still can't find this kit on your web site. May be my internet connection. Any link on the forum to go directly to your order page?

**p3u** · 03-22-2014 10:35 PM

Originally Posted by masaraksh

Talked to my trusted euro shop. They recommended against these... That quality is sub par compared with something like Meyle.

Meyle makes great control arms so if they are on part with them ECS has a good kit lol.

**ECS Tuning-Audi** · 03-24-2014 08:45 AM

Originally Posted by drdljones

Still can't find this kit on your web site. May be my internet connection. Any link on the forum to go directly to your order page?

Click the link at the top of this thread, works fine for me.

Jason

**oildrpr** · 03-25-2014 11:36 AM

I had a Febi kit installed a bit over a year ago. Apparently they sent an A4 kit, so my bushings are all shot already. After spending $500 or so on the kit, and another 300 ish for install and then alignment. i'm in debate with buying another setup. Who's to say they wont deteriorate in a matter a of a year too because they wrong material is being used for our heavier S4's... How can one be assured that these are actually for an 'S4', and not universal with an A4??

**ECS Tuning-Audi** · 03-26-2014 07:09 AM

Originally Posted by oildrpr

I had a Febi kit installed a bit over a year ago. Apparently they sent an A4 kit, so my bushings are all shot already. After spending $500 or so on the kit, and another 300 ish for install and then alignment. i'm in debate with buying another setup. Who's to say they wont deteriorate in a matter a of a year too because they wrong material is being used for our heavier S4's... How can one be assured that these are actually for an 'S4', and not universal with an A4??

Most aftermarket control arm kits are designed for A4's. Fitment is interchangeable between models, the only difference being the style of tie rod end and the upper control arm bushings. That being said if you want actually S4 control arms you need to buy Genuine Audi/VW arms or Lemforder which is the manufacturer of Audi/VW control arms.

Also the majority of why control arm bushings fail is due to installation error. Below is an overview of why they fail when not installed properly.

Jason