*GetYourWheels* Shipment Of The Day Showroom

[GetYourWheels]

any recommendations for a quartz gray 2010 S4?

i'm looking at matte antique bronze, brushed grigio/gunmetal, sunken treasure, or black graphite...

thank you

All of those would look great, but I personally would go with a bronze finish

[GetYourWheels]

I was finally able to snap a nice photo that shows off the Bespoke 1 Matte Bronze Burst perfectly

Photos dont really do this finish justice, but I think this gets pretty close to showing how much metallic flake it has!

We just got most of our Bespoke Gloss and Matte Gunmetal orders back!
If you ordered a set, you'll probably see it in there

*Please note the floors are polished concrete and the wheels are always laid down gently!

[GetYourWheels]

A set of 19x8.5 Forgestar CF10s going out to an S4, as well as a set of CF5Vs, both in Matte Black.



Heres a set of Enkei RPF1s in the standard SBC finish for an Evo 10! Enkei carries only very limited quantities and fitments available in SBC.

[GetYourWheels]

Three more sets of Forgestars going out!
Matte Black CF5s in the back, then F14s in Gloss and Matte Black in the front




Heres a set of F120s in full Gold Bullion and a Full Polish F210s in the rear



Here are 20x10 M580s in Brushed Candy Red

[GetYourWheels]

Here is the first set of Brushed Black Nickle M580s going out to Jon's 2015 S4 in Canada!
AG didnt want to sell it, but with enough persuasion we were able to make it happen!




Truly one of a kind!

Crossing my fingers for some great installed pictures

[GetYourWheels]

This has to be one of my favorite sets that has come out of AG so far!
F520 with Brushed Antique Copper Centers
The finish is awesome and the Z pulls them off perfectly.







Here is the full article on Stance Nation!

[GetYourWheels]

Lots of forged fun today!

Heres an S Class with AG F431 with Brush Polished Brilliant Gold Centers! 20x10 Spec 1 Concave F, 20x12 Spec 2 Long Leg Concave R




And heres a set of F531 Spec 2 for a widebody Scion FR-S in full Gold Bullion

Your eyes aren't playing tricks on you, those are 10" rear lips! Fronts are 8"!

Words to describe this set escape me right now... except, maybe "WOW!"

AG wheels in a music video!



Finally, here are photos of AG's new Directional styles featuring Brush/Polished Faces!

From Left to Right: Design 11, Design 33, Design 21

What do you guys think?

[GetYourWheels]

Our customer just finished up a photoshoot with AG!
The first pic I got turned out amazing, so I wanted to share

22x10 F450s



M590s in Polished Blue Sapphire vs M550s in a 2 Tone - Gloss Black/Brushed Blue Sapphire!

[GetYourWheels]

Here is a Scirocco on Gloss Black M590s, I wish they would bring this car to the states!


Few more shots of the Q5:




Heres a set of Concept One CSL5.5s for a 370Z we refinished with Gloss Brushed Antique Copper centers and barrel!

[GetYourWheels]

Recently did a Macan on 20x9 20x10.5 CV4s in Matte Graphite


These things take some massive wheels & low offsets, cant wait to see what people do with these!


Heres a 435 on 20x8.5" 20x10" M510s Bespoke 3 Matte Antique Bronze!

[GetYourWheels]

Another set of Bespoke 3 Brush Polished M590s next to Bespoke 3 Brushed Antique Bronze M580s


Bespoke 2 M220s painted fully in Pearl White


Here are some photos of 20x10 M580s in Brushed Black Nickle installed on an S7!







These photos are straight off the camera with no editing, so its hard to see the detail from far away!

[GetYourWheels]

Few more photos of the 435




Another set of gorgeous F520s that just came through

[GetYourWheels]

Avant Garde just released a teaser for the next 1 piece cast style they are bringing in, the M640!

Excited for the release of these, concavity looks deep, and its definitely something different I havent seen in a cast wheel yet
First release will be brought in in 20"+ sizes only

It looks to me like its pretty much a cast version of their F340 forged monoblocks!




More info to come as it becomes available!

[GetYourWheels]

If you wanted to see 20x10 M580s on an Allroad, here you go!





Here is our customer's S3 on 19x9.5 Bespoke 3 Gloss Brushed Antique Bronze M580s!

[MarcusDubya77]

All of those look amazing!

[Sweep]

Few more photos of the 435

I can't stop looking at these bronze M510s! Can you PM me pricing for 19x8.5s?

[GetYourWheels]

I can't stop looking at these bronze M510s! Can you PM me pricing for 19x8.5s?

Its a gorgeous finish!

[GetYourWheels]

New set of Alpha Forged going out!

This style is named the Alpha One







Heres the back of the wheel that some wanted to see



I also have a sneak preview of the Alpha Forged cap!


This is the raw machined cap straight out of CNC, once its finished, all the tooling marks will be brushed or polished out.
But I really liked how the alpha logo is raised, should give some cool finishing options!


We're still looking for partial sponsor cars to run these for a discount, contact me for info!

[MarcusDubya77]

I can't wait for mine!!!!

[GetYourWheels]

I can't wait for mine!!!!

Me neither! Cant wait to see your finish combo

[GetYourWheels]

Cool thing about the Alpha set above, it was a brushed base with a matte smoked powercoat over it, in the sun it looks very light, but in the shade it darkens up:


Heres a set of Fondmetal 9XR SuperTouring 20x9 going out to a Mercedes ML


I personally think this wheel would look perfect on an X5 or X3, looks almost like the OEM style.

I was impressed by the machine work on these wheels:


If you look closely at the silver part of the spokes, the lines you see are actually all machined grooves, and then the wheel is clearcoated so it feels smooth to the touch!

[GetYourWheels]

Heres a set of Savini BM7s in 20x9 Titanium for a A5.
Not many people are aware that Savini offers their BM line which are some great looking cast wheels at an affordable price!
Wrapped in 265/30/20 Michelin PSS



Heres a set of Vossen VFS-1s in 20x9 for a Lexus LS, I'll have installed photos next week!

[GetYourWheels]

Not wheel related, but we had a new S Class drop by today to get measured for forged wheels, and wanted to share this beautiful interior!


That silver wood grain trim looks amazing


Heres a set of 18x10.5 square Enkei NT03+Ms going out with 285/35/18 Hankook RS-3s for a 370Z Track setup, BEEFY



Here is a set of F140s with a Bespoke 3 Matte Rose Gold finish

Really love how these turned out!

[GetYourWheels]

Another set of Super Deep Concave F14s powdercoated to Gloss Bronze Burst for a 370Z going out!




A set of AG F140s with Brushed Matte Antique Bronze Centers

Really loving how this set came out



Some professional shots of the 997 on Gloss Black M590s

[GetYourWheels]

We have a brand new set of CE28N with Caps up for grabs!
5x114.3 18x9.5 +22






We recently finished up an install of a set of Vossen VFS1 in Matte Graphite for our Club Lexus customer.
He chose to run 22x9 all around so he could rotate the tires.





Also finished up an install of a set of Avant Garde M550s for our ZPost customer.

[GetYourWheels]

Here is a gorgeous new finish, Bespoke 3 Brushed Copper!
Wheel is first copper plated, then hand brushed, and finally painted with the clearcoat.



Polished Copper Plated lips on this set as well!

[GetYourWheels]

Bespoke 3 Polished Liquid Bronze M590s going out to a 135i in Canada




Heres what the Matte Candy Red F14s look like installed!

[GetYourWheels]

AG M240s custom finished with Bespoke 2 Gloss Metallic Gunmetal centers


Still one of my favorite finishes: Bespoke 3 Brushed Clear M590s in 19x9.5 19x11



21x10.5" M590 all around for a Q5 with fender flares

Mounted with some badass Veredestein Sessanta tires

[GetYourWheels]

Heres the first custom finished sets of the Ruger Classics going out to a 2015 C4S

This set features Bespoke 3 Polished Liquid Copper centers, then we brushed and cleared the lips


All the photos turned out so nice, I couldnt decide which to edit... so I gave up and just did them all

[GetYourWheels]

Just finished up an install of a set of 20x10 M590s in Brushed Stainless... for a Toyota Sienna! I always love seeing something different.
Customer has Air Runner air suspension setup, front lip, and other parts on the way.
We'll get him set up with a nice photoshoot when its all done

[NoR32]

Haha noice!


Your SoCal Realtor
Never too busy for your referrals

[GetYourWheels]

Heres a set of 20x8.5 20x10 set of Bespoke 3 Brushed Stainless M580s going out to a F430 in Canada


19x9.5 M580s in Bespoke 3 Matte Brushed Antique Bronze, love the "sheen" of the matte finish on these


Completed sets getting ready for shipping!


See that set of M510s on the right?

Very interesting take om the Bespoke 3 Brushed/Gloss Black 2 Tone finish going out to a Maserati Ghibili
Kind of makes it look like a forged 3 piece wheel, first time its been done on the M510s

[GetYourWheels]

A few more bronze sets came through, so I went ahead and took some group shots since we all love comparison photos!


M580 - Bespoke 3 Matte Brushed Antique Bronze
M590 - Bespoke 3 Gloss Brushed Antique Bronze
M550 - Bespoke 3 Gloss Brushed Antique Copper

Which is your favorite out of these 3?

[GetYourWheels]

19x9.5 F14s in Black Graphite for a S4, with 255/35/19 Michelin PSS tires



19x8.5 19x11 M510s in Bespoke 3 Pearl White/Gloss Black 2-tone finish for a Gallardo



Installed:

[GetYourWheels]

Just received these photos back from our customer in Canada with the F430
We built him a set of 20" M580s in Bespoke 3 Brushed Stainless finish... gorgeous!

[GetYourWheels]

Lots of black sets going out!
A set of AG M359s for a BMW, all back TSW Monacos with Michelin PSS for a 370Z, and a set of 20" Victor Badens for a Porsche Cayenne



Heres a set of F531s in 21" off a Charger with Brushed Antique Copper Centers

[GetYourWheels]

Here is a new finish, Bespoke 2 Matte Black Graphite
Same as the two stage Black Graphite powdercoat but with a matte finish instead of gloss. Looks a lot like a titanium or anthracite finish.


This set is going out with winter tires to a BMW 235, customer wanted a dark finish but didnt want the common matte black or gunmetal finishes.
I think he chose well!

[GetYourWheels]

Just finished up a set of Forgestar CF10s in Matte Gunmetal for this Ferrari F430!
We did a 19x8.5 20x11" setup with Hankook K120 tires.
Everything fit perfectly, car car could use a drop though :)




Flush fitment!

[GetYourWheels]

Another repeat RS4 customer! This time the car is lowered on H&R Springs

She went with a set of 19x9.5 M580s in Bespoke 3 Brushed Gloss Antique Bronze




Blown away by how great these look against the Phantom Black paint

[GetYourWheels]

Vossen just recently released their brand new Limited Edition VLE-1s last week.
Their new full faced, directional design has been quite polarizing, and many have called it a "love it or hate it" design.

The VLE-1 is the first in a limited-edition series of wheels by Vossen. With only 400
sets produced in two classic finishes, the VLE-1 puts a new twist on Vossen’s
already-established lineup of innovative, concave designs.

Individually-numbered center caps demonstrate both the VLE-1’s exclusivity and the
precision craftsmanship that you’ve grown to expect from Vossen. A matching fifth
center cap is included with each wheel set, as a memento of the exclusive
experience that VLE ownership represents.

The VLE-1 is a 20-inch directional wheel produced in a variety of bolt patterns and widths. Employing a low pressure casting process, the VLE-1 is both lighter and stronger than its conventional gravity cast counterparts. There are 400 sets crafted in each finish, Gloss Graphite and Silver Metallic.

True to Vossen fashion, the wheels were released with a huge marketing push, which included 10 photoshoots commissioned with 10 well known photograpers.













Whats are your thoughts on this new and controversial design? Do you love it or hate it?