Show and tell us about your wheel/tire/suspension setups....

[AFONE]

Wow...that is awesome!


Sent from my iPhone using Tapatalk

[Dutch_A6]

Suchutki looks great, I'm getting the process started in doing the same thing, not sure how long it will take to complete the fabrication since I'm new to this but I've got help. Can't wait to get it done looking at your pics!

[ricekiller]

That bumper is the tit!

[ricekiller]

Just finished - brand new front :) lower part from S6 C7, upper part from A6 C6.5
with central intercooler
and RS6 brakes swap :)

That bumper is the TIT!

[Suchutki]

Thx... I'll get my rear bumper done soon...It'll be converted from RS4 B8 :)

Sorry guys, but can you explain to me what TIT means?? i mean THAT TIT?? :D :P haha

[ebi718]

^^ LMAO..... almost spat out my morning coffee . I agree with the others, car looks stunning.

Apparently, that lower bumper is a direct bolt-on (from a C7)?

[AndreNY]

20x10 Avantgarde Wheels
255/30/20 Toyo Proxes
KW Coilovers

[yellowmanv]

20x10 Avantgarde Wheels
255/30/20 Toyo Proxes
KW Coilovers

Looks Dope

[Suchutki]

.

Apparently, that lower bumper is a direct bolt-on (from a C7)?

It's made from 2 bumpers :)


Photo from Sunday photo session:
more photos soon on https://www.facebook.com/Air6C6

[Dutch_A6]

love those wheels too, car looks great!

[rollininstyle04]

New wheels. New Pics.

Wheels: Avant Garde F162
Finish: Brushed Champagne Centers; Chrome Lips
Wheel Specs: 20x10 et20
Hankook V12
Tire Specs: 235/30/20
Fitment: Light roll on the front fenders, rear fender liners removed, -2 camber in front, -3 camber in rear

[PatPS6]

AG Brushed Champagne

[v8a6]

Pat, the car looks amazing!

[b6s4avantMBCA]

Just tossed on my new Rotiform SPFs (Cast) 20x10 et35 w/ 255/35/20 tires

air going in a week or two... but thought some others would want to see this setup on stock S6 suspension




side fitment:





feels like a 4x4...

[Suchutki]

New photos ;D

[Dutch_A6]

Suchutki beautiful man just beautiful, wish I could get those wheels and get on air!

[callaghan.]

- H&R coilovers
- 20x10 et40 TSW Chicane's in matte gunmetal
- 255/35 Toyo Proxes T1 with Tredwear lettering
- Daily driver / road trip warrior

[Klum00]

- H&R coilovers
- 20x10 et40 TSW Chicane's in matte gunmetal
- 255/35 Toyo Proxes T1 with Tredwear lettering
- Daily driver / road trip warrior

I guess I'm a little biased, but I think it's looking great!

[callaghan.]

I guess I'm a little biased, but I think it's looking great!

Hahah...thanks man! Appreciate it!

[mrismail]

ST Coilovers
18x8 OEM Wheels Plasti dipped
Michelin tires

[jbrentd]

ST Coilovers
18x8 OEM Wheels Plasti dipped

Look great!

I sold the 20" peelers a while back. New set up as follows:

OEM Adjustable Air Suspension (vag-com lowered)
2007 A6 4.2L sedan
Front - 25-7/8" ground to fender
Rear - 26-1/8" ground to fender
OEM Q5 take-offs. 18x8 et39mm
245/40-18 Falken Ziex ZE950 A/S

[se.farrell]

ST Coilovers
18x8 OEM Wheels Plasti dipped

Looks good, and thats an interesting idea for the roof. I was going to do just the center portion but now I am interested to see more pics.

Any rub at that height?
Do they feel bouncy to you at all?

I wanna do ST's and wheels at the same time. Might go coil first then wait the "Winter" (LA) before getting wheels.

[mrismail]

Looks good, and thats an interesting idea for the roof. I was going to do just the center portion but now I am interested to see more pics.

Any rub at that height?
Do they feel bouncy to you at all?

I wanna do ST's and wheels at the same time. Might go coil first then wait the "Winter" (LA) before getting wheels.

I originally started off with the center portion only, then I had the pillars wrapped. I think it looks better with the pillars included, specially after I plastidipped all the chrome trim. I have not experienced any rub from the wheels, I dont think I pushed it hard enough to experience any rub. The car is def more bouncy than before (OEM suspension) but less than what I expected for the amount of drop. Idealy I want to compromise between comfort and sport so I'll prolly be raising it a bit.
Here are more pictures before I lowered it:

Before trim black out


Post trim black out

[callaghan.]

You should continue the 2-tone onto the top of the trunk, follow the lines. IMO, that break up looks pretty bad. Hopefully it's just vinyl.

I originally started off with the center portion only, then I had the pillars wrapped. I think it looks better with the pillars included, specially after I plastidipped all the chrome trim. I have not experienced any rub from the wheels, I dont think I pushed it hard enough to experience any rub. The car is def more bouncy than before (OEM suspension) but less than what I expected for the amount of drop. Idealy I want to compromise between comfort and sport so I'll prolly be raising it a bit.
Here are more pictures before I lowered it:

Before trim black out


Post trim black out

[PatPS6]

in my opinion just the roof being black looks good. but once you love it brother who cares :)

[mrismail]

in my opinion just the roof being black looks good. but once you love it brother who cares :)

I'll admit, I think the pillars are lil too much cause I don't really love it. haha

You should continue the 2-tone onto the top of the trunk, follow the lines. IMO, that break up looks pretty bad. Hopefully it's just vinyl.

I dont really want it to be a 2 tone look. It's just vinyl so I might peel it off the pillars and see how that looks.

[2010A6]

I'm 90% sure that another angle of this car is currently the background on my phone...

[Max-001]

HI all )

XYZ - coilovers

2013 - AME Shalen MX 9x19 10x19



2014 - Work Meister S1 2p 9,5x19 et 25



2015 - winter Rep Advan RS 9,5x19 et 30



next summer 2016 - OEM RS5 Rotor 9x20 et 26 ... comin soon )

[Max-001]

Just finished - brand new front :) lower part from S6 C7, upper part from A6 C6.5
with central intercooler
and RS6 brakes swap :)

Awesome front bumper

[callaghan.]

HI all )

XYZ - coilovers

2013 - AME Shalen MX 9x19 10x19



2014 - Work Meister S1 2p 9,5x19 et 25



2015 - winter Rep Advan RS 9,5x19 et 30



next summer 2016 - OEM RS5 Rotor 9x20 et 26 ... comin soon )

The AME's are so perfect on there! Such a good look.

I need to find some '09 up avant tails...love the clear across both lights.

[ebi718]

HI all )

XYZ - coilovers

2013 - AME Shalen MX 9x19 10x19

Nicely done!!!


Sent from my SM-N910T3 using Tapatalk

[rollininstyle04]

Anyone want to be super stancy buy these :)

http://www.audizine.com/forum/showth...idden-Hardware

[Kem]

Vmr 19x9.5 +45
H&r springs
Koni yellow adj shocks




Sent from my iPhone using Tapatalk

[KBRUCE23]

Very nice Kem, i've got driveway envy!

[AFONE]

Hella clean Kem. The stable looks the business!


Sent from my iPad using Tapatalk

[MaineAvant]

How are these cars to drive low?! Is everything pretty well tucked up? I am looking to go with coilovers for now and fairly low on 19x10 et35 w/ 255/35. I am spoiled with air on my B5 S4 avant.

[ivan0090]

20x9 et 35 with 225 35 20 nexen tyres



20x9 et 42 or 45(cant remember) with 225 30 20 achilles atr aport tyres



Front 20x8.5 et 35 with 235 30 20 nankang ultrasport 2, rear 20x9.5 et 35 with 245 30 20 nankang ultra sport 2

[M3andAMG]

New wheels. Renn Motorsport 19x8.5 ET 35

[KBRUCE23]

New wheels. Renn Motorsport 19x8.5 ET 35

Nice! I'm looking at the AG m510 and they look really similar to those, can't wait to see how they look on your car!


Sent from my iPhone using Tapatalk

[M3andAMG]

Nice! I'm looking at the AG m510 and they look really similar to those, can't wait to see how they look on your car!


Sent from my iPhone using Tapatalk

These wheels only weigh 20.5lbs a rim which is one of the reasons I went with these wheels. Once I put the coilovers in i'll put the wheels on. Just waiting for the winter to be over.