DIY 2.0 FSI Conversion Solder method.

[olethalb]

Thanks for the reply - these are uprated rs6 bolt down coils, the bolt goes through into the valve cover and the hole on the coil pack is metal too.

it brings a CEL too so I hope I haven't introduced more faults with this upgrade

[Bob Marley]

Thanks for the reply - these are uprated rs6 bolt down coils, the bolt goes through into the valve cover and the hole on the coil pack is metal too.

it brings a CEL too so I hope I haven't introduced more faults with this upgrade

I've done this mod... (plug & play harness method) with zero issues, codes etc. So it's definately just you're wiring. Good thing is... it's all cylinders so it should be just 1 error you did to each cylinder. I'd retrace my wiring against the diagram once more... you probably made 1 mistake and duplicated it at each cylinder. There are no codes associated with the coil pack upgrade.

Check you're icm deletes also...

Sent from my SAMSUNG-SM-N920A using Tapatalk