What did you do with your c7 today?

[13allroad]

Bath time and removing vehicle badging


Sent from my iPhone using Tapatalk

[13allroad]

What power washer do you have?

Sent from my iPhone using Tapatalk

[S4Per]

S4Per, your car looks really good. Any issues with the 15mm spacers and where did you get yours from? Thanks.

Thanks! No issues at all, Vagcom lowered and all. Got them from Achtuning.com (which happens to be local, so I could just pick 'em up).

[MadAboutCars]

Thanks! No issues at all, Vagcom lowered and all. Got them from Achtuning.com (which happens to be local, so I could just pick 'em up).

Thanks. Can you remember which lug bolts you got for the 15mm spacers and your rims (which are the same as mine). How far did you lower with Vagcom?

[Sd76]

Not today but I replaced my MORR set with stock one since the front right tire was punctured and is now flat. If it is not repairable, I will have to run stock set for a while since PSS 285/30/20 is back order

Stock! Lol, that looks bad ass!!!!!!


Sent from my iPhone using Tapatalk

[Sd76]

Bath time and removing vehicle badging


Sent from my iPhone using Tapatalk

What do you guys use for this foaming car wash I might have to pick one up in the spring and I think I mat de badge as well!


Sent from my iPhone using Tapatalk

[13allroad]

What do you guys use for this foaming car wash I might have to pick one up in the spring and I think I mat de badge as well!


Sent from my iPhone using Tapatalk

I use a foam cannon just like this one, fill 1/4 way with chemical guys wash and top with water. Attach to any pressure washer electric or gas and adjust your tip. If you go to Amazon and type foam cannon you can see what they look like.


Sent from my iPhone using Tapatalk

[13allroad]

Sunday available all day... U bring beer


Sent from my iPhone using Tapatalk

[S4Per]

Thanks. Can you remember which lug bolts you got for the 15mm spacers and your rims (which are the same as mine). How far did you lower with Vagcom?

You bet. From this page, the "R13 Floating (17MM Hex) Black Zinc, 14MM x 1.5 x 42MM" are the ones I bought. Below are my pre and post Vagcom values. I went for 17mm all around and didn't encounter any errors.

• Pre (LF, LR, RF, RR): 393.5, 391.5, 392.1, 388.8
• Post (LF, LR, RF, RR): 410.5, 408.5, 409.1, 405.8

Cheers,
Per

[MadAboutCars]

You bet. From this page, the "R13 Floating (17MM Hex) Black Zinc, 14MM x 1.5 x 42MM" are the ones I bought. Below are my pre and post Vagcom values. I went for 17mm all around and didn't encounter any errors.

• Pre (LF, LR, RF, RR): 393.5, 391.5, 392.1, 388.8
• Post (LF, LR, RF, RR): 410.5, 408.5, 409.1, 405.8

Cheers,
Per

Thanks, Per. Again you're a big help. I couldn't get them from Achtuning, but was able to source the matching parts from Tuner Shop in Germany, using eBay.

[Soft]

Thanks to MYAUDIS7 I installed this little beauty. Winter wheel setup has the car reading 58mph at 60 on the gps but I wouldn't frown on a 4 second 0-60 on APR 91 map and wheel spin anyhow!

Sent from my SM-N920V using Tapatalk

I see a consumption meter in the DIS, I do not have this one in my A7 2012, anyway to enable with vcds ?

[Roccorace]

My 12 A7 had it, I cant believe yours doesn't. I think you choose the top choice from the menu when you hit the steering wheel button just to the right next to the ok button on the steering wheel, then scroll down through the displays. Ironically it is not under economy programs...

[PKmode]

My '12 A6 Prestige has it and you access it as described above.

[tenspeed]

My 12 A7 had it, I cant believe yours doesn't. I think you choose the top choice from the menu when you hit the steering wheel button just to the right next to the ok button on the steering wheel, then scroll down through the displays. Ironically it is not under economy programs...

I think it's a sub menu of the second item down. It might be below the Short Term Memory screen. Just found it myself after seeing this.

[Serpent]

I'm snowed in today

[tonymission]

I knew I bought a 4x4 F150 for a reason!


Sent from my iPhone using Tapatalk

[RRF985]

I'm snowed in today

Same here. The A6 is a big, white lump.

[Roccorace]

35% vinyl on tails and markers, no snow today on Minnesota and its warm enough to stand the garage. It isn't as dark as it looks in the pics, came out good.

Sent from my SM-N920V using Tapatalk

[Serpent]

I dug my car out


Sent from my iPhone using Tapatalk

[Roccorace]

I dug my car out


Sent from my iPhone using Tapatalk

That sucks.

Sent from my SM-N920V using Tapatalk

[Serpent]

She's out!


Sent from my iPhone using Tapatalk

[tonymission]

You don't keep that beaut in a garage? I'd be way too worried about that!


Sent from my iPhone using Tapatalk

[RRF985]

Took about a half hour to get the car out.



This crap is ridiculous.


Almost there:


Finally out:

[Serpent]

Its not considered out until there's no snow on top of the car

[MadAboutCars]

Fitted SCC 15mm spacers (Made in Germany and Autobahn approved by TÜV) all round on my 2016 S6, after seeing Per's S6 pictures. Perfect result with stock 20" wheels.

[13allroad]

Fitted CCS 15mm spacers (Made in Germany and Autobahn approved by TÜV) all round on my 2016 S6, after seeing Per's S6 pictures. Perfect result with stock 20" wheels.

Got a link for them?


Sent from my iPhone using Tapatalk

[MadAboutCars]

Sorry it was SCC (I've edited the post above). I got them from Tune Shop on eBay. This is the link to their site:
http://www.tunershop.com/SCC_Wheel_S...880802_h3.html

The eBay listing had free shipping for the spacers and the 43mm wheel bolts.

[S4Per]

Adam's rotors and pads finally installed.


Was going to install the Disc Italia Ceramics, but this :(


Thankfully, due to a shipping mixup on the rotors, I got free pads from Adam's and used those instead. I was surprised what happened with the Italia's...wasn't cranking on it or anything.

[agent47]

Washed and waxed the car Sunday only for some motherfu**in winds to blow truckloads of dust on Monday and birds with laser guided shit targeting my car - strange looking greenish black stuff that had already dried by the time I saw it. Did not have time to do a proper wash so took a leap of faith with Optimum No Rinse. Holy crap, that thing works great (granted I did hose the car down with water for a couple of minutes). No swirls or scratches, car looks sparkling clean. Also, I am really impressed by the Klasse AIO and HGS coatings I did. Generally with bird shit, we need to buff the spot but surprisingly what looks etched just washes away during the car wash.

[turbello18]

Tint yesterday, links today.

[HackDevil]

Tint yesterday, links today.

That looks amazing! What wheels are those?

[turbello18]

Thank you. A6 black optic 19's. I believe from 2015.


Sent from my iPhone using Audizine mobile app

[arrivalanche]

Took my girlfriends A6 in for some Valentine's Day goodies at Eurocode. Crystaline window tint all around, blacked out badges and taillights, debadged the rest, and I even custom made some heart rings that shes wanted for over a year.

[cmendes0101]

Well not today but last month..

I dropped in a honeycomb grill, 20" LED bar and Whelen 100w Siren PA.

PA is hooked up to a small amp that goes to a 3.5mm Aux cable. Thats connected to an Arduino with 6 buttons to play siren or music clips and also a mic. If anything just plug in my phone. PA is not really visible but its in the top right of the inside of the grill.








Then to toggle the LED bar and PA amp I used a couple illuminating buttons and made a mount for it.

[_SILENCER]

Got my oil changed, made arrangements for my stage 1 APR, and broke 110MPH on the way home

[VPRS7]

Had Unitronic Stage 1+ tune done to my RS7 yesterday afternoon. Haven't had much chance to test it yet as I had plans last night.

However........the acceleration from rolling is monstrous I hit 175 kph on highway on-ramp in seconds prior to backing off. Gotta get out to some back country roads today to do some launches and have some fun!

Unitronic claims 691 Hp, 655 Tq and I don't doubt it.

One of these days I will have to dyno this beast.

[all_kobiwon]

Painted the diffuser and added new Exhaust system.

[VeryBadman]

Had Unitronic Stage 1+ tune done to my RS7 yesterday afternoon. Haven't had much chance to test it yet as I had plans last night.

However........the acceleration from rolling is monstrous I hit 175 kph on highway on-ramp in seconds prior to backing off. Gotta get out to some back country roads today to do some launches and have some fun!

Unitronic claims 691 Hp, 655 Tq and I don't doubt it.

One of these days I will have to dyno this beast.

Glad to know that we have another member with Unitronic! At first I had Stage 1+ flashed to my car but being in CA I only had 91 gas in the tank and so the power gain seemed underwhelming because the car obviously ran in low power mode.

After back and forth with Unitronic I finally have stage 1 program available and flashed it to my car on Friday. Now it seems to run better since the program matches the gas but I don't know if it really makes more power. I will have to schedule with 034 to put my car on dyno again to see the actual numbers.

[AudiA6A5]

Well not today but last month..

I dropped in a honeycomb grill, 20" LED bar and Whelen 100w Siren PA.

PA is hooked up to a small amp that goes to a 3.5mm Aux cable. Thats connected to an Arduino with 6 buttons to play siren or music clips and also a mic. If anything just plug in my phone. PA is not really visible but its in the top right of the inside of the grill.








Then to toggle the LED bar and PA amp I used a couple illuminating buttons and made a mount for it.

Is the 20" led bar suppose to act like a fog light? Any pics with it on at night?

[ayoo456]

Painted the diffuser and added new Exhaust system.

How did you go about painting it?

Sent from my SAMSUNG-SM-G930A using Tapatalk