What did you do with your c7 today?

**cmendes0101** · 12-23-2015 08:21 PM

Replaced the Bose 10" sub with a Rockford Fosgate sub and amp. Used dynomat and padding to reduce rattling on the rear deck. Pretty happy with the results!
It looks huge since its the open box or infinite baffle style of sub.

**leethalink** · 12-23-2015 09:16 PM

Originally Posted by Phoneboy

Do you have spacers on that? What wheels are those? They look great.

Sent from my iPhone using Tapatalk

Sry assume you're asking me. No spacers, stock wheels -black optic.

Sent from my iPad using Tapatalk

**cmg_r** · 12-25-2015 06:12 AM

Building the door panels.

**hubris** · 12-25-2015 06:32 AM

Originally Posted by cmendes0101

Replaced the Bose 10" sub with a Rockford Fosgate sub and amp. Used dynomat and padding to reduce rattling on the rear deck. Pretty happy with the results!
It looks huge since its the open box or infinite baffle style of sub.

Nice. How's the bass output? I have heard it can be a bit lacking from an open air sub. What did you do with the active noise cancellation? Did you have to modify the opening of the rear deck or did it drop right in?

**oliverds** · 12-25-2015 02:33 PM

Changed from Airlift autopilot v2 to v3, a great improvement!

Gesendet von iPad mit Tapatalk

**Roccorace** · 12-27-2015 09:14 AM

Thanks to MYAUDIS7 I installed this little beauty. Winter wheel setup has the car reading 58mph at 60 on the gps but I wouldn't frown on a 4 second 0-60 on APR 91 map and wheel spin anyhow!

Sent from my SM-N920V using Tapatalk

**yeuchau** · 12-27-2015 05:13 PM

Installed my home made front lip.

**MadAboutCars** · 12-27-2015 05:51 PM

Removed the 034motorsport transmission mount from my 2016 S6. I gave it quite a few weeks of driving, but could only notice annoyingly harsh shifts in sports mode when cornering and when manual shifting under hard acceleration. Looking at the rubber that has adhered to the mount, at certain points, I don't think it would have been long before the rubber damper broke down and there would have been metal to metal.

**pandi** · 12-28-2015 09:45 AM

Originally Posted by yeuchau

Installed my home made front lip.

Is it my imagination or is your driver's side hood/fender not lining up?

**agent47** · 12-28-2015 09:51 AM

Originally Posted by pandi

Is it my imagination or is your driver's side hood/fender not lining up?

Its visible in the front end photo also.

Sent from my SM-N920P using Tapatalk

**RRF985** · 12-28-2015 11:37 AM

Originally Posted by pandi

Is it my imagination or is your driver's side hood/fender not lining up?

I thought the same thing as well looking at it.

**yeuchau** · 12-28-2015 07:14 PM

I went look at the car, actually it is slightly off, any idea why would that be?
Bumper was recently removed for pulley install.

**ntsantos** · 12-28-2015 08:14 PM

I just did a few long awaited Vagcom mods. The remote trunk close was worth the price of the cable itself.

Sent from my SAMSUNG-SM-G900A using Tapatalk

**S4Per** · 12-28-2015 11:17 PM

15mm spacers all around, a wash, and a couple of pics

**ntsantos** · 12-29-2015 07:42 PM

A flat bottom steering wheel.

Sent from my SAMSUNG-SM-G900A using Tapatalk

**VeryBadman** · 12-29-2015 09:49 PM

Drove up to Tahoe to show my folks from oversea some snow. Since I'm still on summer tires, I went not too far and avoided going into deep snow a.k.a trouble.

**cmendes0101** · 12-29-2015 10:58 PM

Originally Posted by hubris

Nice. How's the bass output? I have heard it can be a bit lacking from an open air sub. What did you do with the active noise cancellation? Did you have to modify the opening of the rear deck or did it drop right in?

Its good for what I was looking for. This ones not that much power, I think 250w rms (500w max). I've had bigger setups in my other cars but was looking for something nice without getting too crazy and save pretty much all the trunk space instead of a box. It fit perfectly in the rear deck but did have to drill 4 holes to bolt it in since the hole was made for the plastic sub holder to mount. Downside since it's on the rear deck it rattles when turning it up like if it was in a box wouldn't be as noticeable. I put dynomat and also padded around but theres still places I need to narrow down to dampen.

**iamshack** · 12-30-2015 08:32 AM

Originally Posted by VeryBadman

Drove up to Tahoe to show my folks from oversea some snow. Since I'm still on summer tires, I went not too far and avoided going into deep snow a.k.a trouble.

Car looks gorgeous...love the suzuka gray

**RRF985** · 12-30-2015 09:19 PM

Dropped it off at the dealer for the T-Moblie modem update and the MMI update. They are waiting on parts from Audi. I should have it back next week. I have a new Q5 to drive in the meantime.

**simonaitch** · 12-31-2015 01:01 PM

Originally Posted by VeryBadman

Drove up to Tahoe to show my folks from oversea some snow. Since I'm still on summer tires, I went not too far and avoided going into deep snow a.k.a trouble.

Wow Summer tires. How did the car handle ? Certainly looks to be below the 7c recommendation.

**VeryBadman** · 12-31-2015 02:59 PM

Originally Posted by simonaitch

Wow Summer tires. How did the car handle ? Certainly looks to be below the 7c recommendation.

It's 36F (2.2C). The car drove just fine on that icy floor but I also drove slowly. On the main road was dry so the car handled just like how it's supposed to on dry road.

**ntsantos** · 01-03-2016 07:35 PM

Installed ECS wheel spacers 17.5mm all around.

Before

After

**iDevX** · 01-10-2016 10:36 AM

Here is the RS6 line mounted on the beautiful ...

All simply magnificent...

... and all remaining original Audi .... The class! Something crazy .... It really changes everything noise level ...

Already the noise of the V8 is beautiful with the original line ... .. But there is happiness!

Petit tries on Highway late yesterday crossbred, as well as cantonal road, the result is really stunning!

The line is the same size, a copy of the outside, but the content of 3 baffles (Central and outputs) must be different for such a difference in sound ... and I do not even speak of sound during ... setback when retrograde via the paddles, it's terrible!

The sound is really exciting for original line ... Not as a line IPE Innotech, Akrapovic or Miltek, for sure!
Although quieter at low revs, but as soon as it purrs we support everything goes well;)

Since the cabin is really meant hard, I imagine from outside the moving car !

http://player.vimeo.com/video/151152341

**B5SilverS4** · 01-10-2016 03:59 PM

I washed my S6 today so it was a slow day

**Boden AutoHaus** · 01-12-2016 11:06 AM

A7 Completed with Rotiform CCV's

**07S6** · 01-14-2016 06:43 AM

Just got my MMI updated to latest v.814. No issues whatsoever.
Also ordered 12.5mm spacers..will post pics when installed.

**hubris** · 01-14-2016 07:33 AM

Originally Posted by 07S6

Just got my MMI updated to latest v.814. No issues whatsoever.
Also ordered 12.5mm spacers..will post pics when installed.

Does that version show album art over Bluetooth like the 2016s do?

**07S6** · 01-14-2016 08:40 AM

Originally Posted by hubris

Does that version show album art over Bluetooth like the 2016s do?

Not sure. Haven't tried streaming yet.. Will try. My B&O sounds a little crisper but could be placebo effect.

**FourRingThing** · 01-14-2016 09:46 AM

Originally Posted by yeuchau

I went look at the car, actually it is slightly off, any idea why would that be?
Bumper was recently removed for pulley install.

open the hood and on the side that is low turn the rubber bumper to the left to make it longer and that will lift the hood. tweak as required to align.

**RRF985** · 01-14-2016 10:57 AM

Finally got my car back after two weeks at the dealer. 5F module replaced with updated parts and MMI updated to 814. My glove box repair was finally squared away after dealing with the selling dealer, AoA, and my local dealer it's finally fixed. Really unhappy with the service department of the selling dealer. Glad to have the car back!

**iDevX** · 01-16-2016 07:18 AM

Bumper and grille front RS6 C7 2015 on my S6 C7 2012...

**erdem-1612** · 01-18-2016 01:52 PM

Originally Posted by iDevX

Bumper and grille front RS6 C7 2015 on my S6 C7 2012...

How much did it cost? Looks amazing!

**yeuchau** · 01-18-2016 02:20 PM

Originally Posted by FourRingThing

open the hood and on the side that is low turn the rubber bumper to the left to make it longer and that will lift the hood. tweak as required to align.

can you help with a pciture, so that i know exactly what it is, thanks

**JoeGie** · 01-18-2016 02:28 PM

Originally Posted by yeuchau

can you help with a pciture, so that i know exactly what it is, thanks

it will look something like this

**yeuchau** · 01-18-2016 08:54 PM

Originally Posted by JoeGie

it will look something like this

That was easy, got it aligned now, thank you both.

**MadAboutCars** · 01-18-2016 09:46 PM

Originally Posted by S4Per

15mm spacers all around, a wash, and a couple of pics

S4Per, your car looks really good. Any issues with the 15mm spacers and where did you get yours from? Thanks.

**iDevX** · 01-19-2016 02:34 AM

Hello,

The price that cost me the bumper Audi RS6 C7 2015 adaptable Audi A6/S6 2011-2015 is £ 1,000.00. :)

Provider web link: http://www.xenonz.co.uk/audi-a6--s6-c7-2011--2015.html

**redunk** · 01-19-2016 09:45 AM

Got opti-coat apply to keep swirls away

**07S6** · 01-20-2016 12:19 PM

Just installed 12.5mm spacers from 3Zero3 Motorsports on all sides, on 20x9 ET35 wheels.. New longer lugs as well. Sorry for the dirty pics
Thanks to Blake and the team at 3ZERO3 Motorsports for their expert guidance with my order..
ImageUploadedByTapatalk1453320026.297381.jpg
ImageUploadedByTapatalk1453320054.077462.jpg

**VeryBadman** · 01-20-2016 03:10 PM

Not today but I replaced my MORR set with stock one since the front right tire was punctured and is now flat. If it is not repairable, I will have to run stock set for a while since PSS 285/30/20 is back order

Thread: What did you do with your c7 today?

Thread Tools

Display

Bookmarks

Bookmarks

Posting Permissions