JHM C7-D4 4.0T ECU & TCU Software - Official Thread

[Jake@JHM]

Official JHM 4.0T ECU and TCU Tuning Thread

NOTE: Our ECU/TCU Combos include all stages and octane options. No need to purchase separately.

JHM C7 S6-S7 and D4-A8 4.0T ECU and TCU Software:

Experience the ultimate in performance with our cutting-edge software for the 4.0T engine. Our team of engineers has spent years refining and perfecting our software, ensuring that you get optimal performance without any guesswork.

With our one-cable flashing suite for both ECU and TCU, you'll get the most out of your vehicle's potential. Our transmission tune is optimized with a 2000 to 2500 rpm launch control (DSG), ensuring that you get consistent launches without tire spin on street tires and stock turbos. We've performed hundreds of test passes to ensure that our launch assist range is ideal for street tires while still keeping your rear axles intact.

This is a one-and-done solution that only requires a single flashing cable (JHM Power-Connect) and can be easily flashed in the comfort of your own home with an internet connection. And the best part? Upgrading to Stage 2 and 3 is absolutely free!

Our ECU and TCU combination is specifically designed to work together, providing you with a range of benefits that include increased engine rev limits, more aggressive throttle control, faster shifting speeds, and higher clutch clamping loads. Our software also offers a more assertive shifting experience in Sport mode and after launching, as well as a variable launch RPM for more aggressive and consistent launches.

We've also fine-tuned our software for refined drive and normal driving shifting dynamics, decreased transmission wear, raised torque limiters, and a more aggressive torque curve. Our software offers maximum boost for each gear with faster spool, safe EGT management for stock catalyst protection, and a larger range of fuel and ignition adaptation for even more power.

We've even adjusted our ESP and traction control to eliminate micro braking due to tire spin, helping to prevent axle breakage when launching. Experience the best in performance with our state-of-the-art software for the C7 S6, S7, and D4 A8 4.0T.

By making an ECU and TCU combination that works together we were able to do the following for your C7 S6 S7 and D4 A8 4.0T

Engine Rev limit increased to 7200 rpm
More aggressive throttle control
Increased shifting speeds
Faster Clutch Clamping with Higher Clamp Loads
More assertive shifting in Sport mode and after launching
Variable Launch RPM
More aggressive and consistent Launch
Refined Drive and normal driving shifting dynamics
Decreased Transmission wear due to less slipping from faster shifting
Raised TQ limiters
More Agressive Torque Curve
Maximum Boost for each gear with faster spool
Safe EGT Management for Stock Catalyst Protection keeping your car as safe as possible while maximizing performance - Stage 1
Larger Range of Fuel Adaptation for More Power from Better Fuel
Larger Range of Ignition Adaption
ESP / traction control adjusted to eliminate micro braking due to tire spin (Helps prevent axle breakage when launching)

BONE STOCK with JHM ECU/TCU Software, JHM FUEL LINES - Stage 1 E40 - 2013 A8L




CLICK HERE for more information or to purchase software.


CLICK HERE FOR STAGE 3/RS7 Turbo Software

[Jake@JHM]

JHM C7 RS7 and D4 S8 4.0T ECU and TCU Software:


NOTE: Our ECU/TCU Combos include all stages and octane options. No need to purchase separately.


Our Stage 1 and 2 performance ECU and TCU software is specifically designed to work in harmony together maximize the engine power output capabilities. With extensive research and testing, we have created the ultimate software for your car. Our tuning will give your RS7 or S8 improved throttle response, higher shift points, and more power throughout the entire RPM range leading to faster acceleration and a much more rewarding and refined driving dynamic.

Our software for the 4.0T has been developed and refined over years of daily driving and abuse by our engineering team to take the guesswork out of the equation on what tune combo is best. One cable, one flashing suite for both ECU-TCU to get optimal performance. Our transmission tune is optimized with left foot braking to fully stall the converter for the most aggressive launch you are comfortable doing based on tires, traction, etc. Or you can just roll into it.

This is a one-and-done solution with only ONE Flashing Cable Required (JHM Power-Connect) and can be flashed in the convenience of your own home with an internet connection. To make this even better, upgrading to Stage 2 and 3 are free!

By making an ECU and TCU combination that works together we were able to do the following for your C7 RS7 - D4 S8 4.0T:

Engine Rev limit increased to 7200 rpm
More aggressive throttle control
Increased shifting speeds
More assertive shifting in Sport mode and after launching
Launch Stall RPM raised from ~2000 to ~3000 (outside factors can alter this result)
More aggressive and consistent Launch
Refined Drive and normal driving shifting dynamics
Decreased Transmission wear due to less slipping from faster shifting
Raised TQ limiters
More Agressive Torque Curve
Maximum Boost for each gear with faster spool
Safe EGT Management for Stock Catalyst Protection keeping your car as safe as possible while maximizing performance - Stage 1
Larger Range of Fuel Adaptation for More Power from Better Fuel
Larger Range of Ignition Adaption
ESP / traction control adjusted to eliminate micro braking due to tire spin (Helps prevent axle breakage when launching)

RS7-R Turbos, JHM Downpipes and Stock Catback, 93 Octane Fuel - Full Weight



[URL="https://jhmotorsports.com/jhm-ecu-and-tcu-stage-1-2-stock-or-rs7-r-turbo-tuning-bundle-for-c7-rs7-d4-s8-4-0t-with-stock-or-rs7-r-turbo.html"][B][COLOR="#FF0000"][SIZE=3]CLICK HERE

[Jake@JHM]

JHM DL501 TCU SOFTWARE:



We've been providing industry leading Audi Transmission Software since 2009!

Unleash the true power of your DL501 7-Speed DSG Transmission with JH Motorsports TCU software - the ultimate performance upgrade for your transmission! Our software is specifically designed to be flashed directly to your transmission control module through the OBDII port with JH Motorsports proprietary DL501 calibrations and our JHM Power-Connect Flashing Suite, unlocking its full potential and transforming your driving experience.



Our team of experts has spent countless hours researching and testing our in-house DL501 Test Mules to create the ultimate software for your car. Enjoy faster acceleration, increased shifting speeds, and more assertive shifting in Sport mode and after launching. With increased shift points above factory (Proper ECU Software Required), you'll experience an exhilarating rush every time you hit the gas.

But that's not all - With our Multiple Launch RPM options and our dialed in launch control, delivers a more aggressive and consistent launch every time. Our refined Drive and normal driving shifting dynamics ensure a smooth ride, while decreased clutch wear due to less slipping from faster shifting and increased clamping pressure guarantees you can push your car to the limit with confidence.

Our raised torque limiters with improved torque management provide the perfect balance of power and control, ensuring you never have to sacrifice one for the other.

Upgrade to JH Motorsports TCU software today and experience a driving experience like no other!

Unlock the full potential of your DL501 7-Speed Transmission with the exhilarating features of JH Motorsports TCU software. Experience unparalleled performance with:

RPM Rev Limit options of OEM, 7200 RPM, or Custom with request
Lightning-fast shifting speeds
More assertive shifting in Sport mode and after launching
Multiple Launch RPM Options or Custom with request
More aggressive and consistent launch for an unbeatable driving experience
Refined drive and normal driving shifting dynamics for smoother performance
Decreased clutch wear from faster Clutch Clamping with Higher Clamp Loads
Raised torque limiters with improved torque management for enhanced control.


NOTE: Our TCU software is designed to work seamlessly with the proper ECU software to ensure optimal performance. If your current Brand X ECU software conflicts with our TCU software, leading to issues with shift points or shifting itself, we can collaborate with you to modify our TCU software to work in harmony with your ECU software. Alternatively, you can take advantage of our switch discount to get our matching JHM ECU software for your vehicle, unlocking its full potential.

CLICK HERE for more information or to purchase software

[Jake@JHM]

JHM ZF8 TCU SOFTWARE:



We've been providing industry leading Audi Transmission Software since 2009!

Unleash the true power of your ZF 8-Speed Transmission with JH Motorsports TCU software - the ultimate performance upgrade for your car! Our software is specifically designed to be flashed directly to your transmission control module through the OBDII port with JH Motorsports proprietary AL551 calibrations and our JHM Power-Connect Flashing Suite, unlocking its full potential and transforming your driving experience.



Our team of experts has spent countless hours researching and testing our in-house ZF8 Test Mules to create the ultimate software for your car. Enjoy faster acceleration, increased shifting speeds, and more assertive shifting in Sport mode and after launching. With increased shift points over 1000 RPM above factory (Proper ECU Software Required), you'll experience an exhilarating rush every time you hit the gas.

But that's not all - we've also raised the launch stall RPM from ~2000 to ~3000, delivering a more aggressive and consistent launch every time. Our refined Drive and normal driving shifting dynamics ensure a smooth ride, while decreased transmission wear due to less slipping from faster shifting guarantees you can push your car to the limit with confidence.

Our raised torque limiters with improved torque management provide the perfect balance of power and control, ensuring you never have to sacrifice one for the other. Upgrade to JH Motorsports TCU software today and experience a driving experience like no other!

Unlock the full potential of your ZF 8-Speed Transmission with the exhilarating features of JH Motorsports TCU software. Experience unparalleled performance with:

Shift points increased to 7200 RPM (Proper ECU Software Required)
Lightning-fast shifting speeds
More assertive shifting in Sport mode and after launching
Launch Stall RPM raised from ~2000 to ~3000 (outside factors can alter this result)
More aggressive and consistent launch for an unbeatable driving experience
Refined drive and normal driving shifting dynamics for smoother performance
Decreased transmission wear from faster shifting
Raised torque limiters with improved torque management for enhanced control.


NOTE: Our TCU software is designed to work seamlessly with the proper ECU software to ensure optimal performance. If your current Brand X ECU software conflicts with our TCU software, leading to issues with shift points or shifting itself, we can collaborate with you to modify our TCU software to work in harmony with your ECU software. Alternatively, you can take advantage of our switch discount to get our matching JHM ECU software for your vehicle, unlocking its full potential.


CLICK HERE for more information or to purchase software