What did you do with your c7 today?

[denalist]

I went 3.5" on my car I couldn't find 4" at the time they look ok but I think the 4" would look meaner

Sent from my SM-G955U using Audizine mobile app

So there isn't enough room to easily fit the 4" without them coming in contact with each other. The inner OR outer pipes need to be moved over about 1/4" - 1/2" to allow the large 4" cannons to fit correctly. I measured the gap between the existing OEM pipes before I started and thought they maybe would fit but in reality there was definitely a need for come up with a solution to make them fit.


OEM



OEM

[sickmade0331]

So there isn't enough room to easily fit the 4" without them coming in contact with each other. The inner OR outer pipes need to be moved over about 1/4" - 1/2" to allow the large 4" cannons to fit correctly. I measured the gap between the existing OEM pipes before I started and thought they maybe would fit but in reality there was definitely a need for come up with a solution to make them fit.


OEM



OEM

I don't think you would have to do anything special all the milteks and so on are 4" just the exhaust shop I went to didn't have 4" and couldn't easily get them that same day so I just went with 3.5

Sent from my SM-G955U using Audizine mobile app

[thebigwawa]

I'm trying to decide what color to wrap my S6. When I do I'm swapping the grill to an RS style. I can't find one that is not OEM for 1600 that has the proper camera mounts as I have ACC and around view. Is yours OEM? All the threads I've looked thru and followed links most are not for my style. :/

Wrapped mine in matte metallic grey and I love it



Sent from my iPhone using Audizine

[parkstr8]

I'm getting ready to wrap mine as well...I'm Glacier White now. What brand wrap and color is that? Assuming it was around 3k? My roof is already wrapped so they wont have to do that...

Wrapped mine in matte metallic grey and I love it



Sent from my iPhone using Audizine

[thebigwawa]

I'm getting ready to wrap mine as well...I'm Glacier White now. What brand wrap and color is that? Assuming it was around 3k? My roof is already wrapped so they wont have to do that...

It's Avery Dennison matte metallic grey. Cost $2200 for the wrap and $800 for a body shop to prep it and then put it back together.

What color are you going with?


Sent from my iPhone using Audizine

[denalist]

Today's mod of the day for me was the RS6 grill :). Still have to put the S6 logo on and debating silver or black rings...

[parkstr8]

I'm still trying to decide. Probably a grey or satin black. I might match the grey in the rotors I have. Whatever color has to blend/go with the wheels as I don't want to swap those. I budgeted for around 3. And I like your grey.

It's Avery Dennison matte metallic grey. Cost $2200 for the wrap and $800 for a body shop to prep it and then put it back together.

What color are you going with?


Sent from my iPhone using Audizine

[jsilas]

Today's mod of the day for me was the RS6 grill :). Still have to put the S6 logo on and debating silver or black rings...

Looks phenomenal. That thing is absolutely gorgeous. Which one did you get? Did you have to modify for your parking sensors? I might want to go for that....

[denalist]

Looks phenomenal. That thing is absolutely gorgeous. Which one did you get? Did you have to modify for your parking sensors? I might want to go for that....

Thanks! I did not have to modify anything for the parking sensors. There was a bit of trimming on a section of the back of the grill that was very quick and easy. It's off eBay, seller was stonecarbon, super good quality and great fit!

[SierraBravo]

Milltek cat-back exhaust installed yesterday. Pretty rad for this old man.

[AudiPapi]

Looks phenomenal. That thing is absolutely gorgeous. Which one did you get? Did you have to modify for your parking sensors? I might want to go for that....

Looks amazing. Just out of curiosity, what wheels are you running? Beautiful vehicle!

- - - Updated - - -

Looks amazing. Just out of curiosity, what wheels are you running? Beautiful vehicle!

- - - Updated - - -

Today's mod of the day for me was the RS6 grill :). Still have to put the S6 logo on and debating silver or black rings...

Looks amazing. Just out of curiosity, what wheels are you running? Beautiful vehicle!

[aFOURstance]

Im trying to get an RS6 grille also but I have the night vision and front camera idk if theres a specific one I need to buy, any ideas or suggestions?


Sent from my iPhone using Tapatalk

[denalist]

Im trying to get an RS6 grille also but I have the night vision and front camera idk if theres a specific one I need to buy, any ideas or suggestions?


Sent from my iPhone using Tapatalk

The seller of my grill on eBay was able to accommodate whatever options and color combos I wanted (black with black rings, silver surround/ black rings, etc). I think he can also do the night vision and camera holes but I do have a feeling that it would still need a little fabrication when you received it. That being said, I'm impressed with the quality for the money.

[aFOURstance]

The seller of my grill on eBay was able to accommodate whatever options and color combos I wanted (black with black rings, silver surround/ black rings, etc). I think he can also do the night vision and camera holes but I do have a feeling that it would still need a little fabrication when you received it. That being said, I'm impressed with the quality for the money.

Thanks man I'll look for the same seller and inquire


Sent from my iPhone using Tapatalk

[parkstr8]

I'm looking, too...I have the cameras, as well. Not sure I want to spend OEM 1600...but I would not mind 500 or so - as long as it was mostly direct bolt on with no major mods and a good quality.

Im trying to get an RS6 grille also but I have the night vision and front camera idk if theres a specific one I need to buy, any ideas or suggestions?


Sent from my iPhone using Tapatalk

[denalist]

I'm looking, too...I have the cameras, as well. Not sure I want to spend OEM 1600...but I would not mind 500 or so - as long as it was mostly direct bolt on with no major mods and a good quality.

The quality is impressive, if you can handle using a dremel or Grinder this is a no brainer. I had low expectations for this but was pleasantly surprised.

[lnferno]

Painted the seat logos.

[AUDIofil]

Went from stock to APR Stage II dual pulley setup :)

[parkstr8]

I can't find him on Ebay...

Thanks! I did not have to modify anything for the parking sensors. There was a bit of trimming on a section of the back of the grill that was very quick and easy. It's off eBay, seller was stonecarbon, super good quality and great fit!

[denalist]

I can't find him on Ebay...

https://rover.ebay.com/rover/0/0/0?m...2F301572506849

Try this link and see if it works. Hope this helps, otherwise feel free to pm me and we can figure it out :). Shipping says it takes a long time but mine arrived within 6 days I think.

[thebigwawa]

I'm still trying to decide. Probably a grey or satin black. I might match the grey in the rotors I have. Whatever color has to blend/go with the wheels as I don't want to swap those. I budgeted for around 3. And I like your grey.

Thanks. I’m very happy with the grey. It looks great especially in direct sunlight.
The satin black is awesome as well - my S4 is wrapped in satin black.



Sent from my iPhone using Audizine

[4Chio]

Painted the seat logos.

How did you do that ?

[lnferno]

How did you do that ?

Put 2 coats of silver and 3 coats of red. To be honest, it looks better today than when I took that picture yesterday. The paint was still wet when I took the picture.

[parkstr8]

I really dig the satin black...and there is a grey that is in between your grey and the satin black.

Thanks. I’m very happy with the grey. It looks great especially in direct sunlight.
The satin black is awesome as well - my S4 is wrapped in satin black.



Sent from my iPhone using Audizine

[thebigwawa]

I really dig the satin black...and there is a grey that is in between your grey and the satin black.

I thought about a darker grey. I look forward to seeing your car post wrap!


Sent from my iPhone using Audizine

[A6sport]

Went from stock to APR Stage II dual pulley setup :)

What do you think?

[jsilas]

Today, I drove it to work. But before I did that, I took a picture, because I washed it yesterday and it was looking lovely.

[AUDIofil]

What do you think?

I love the car even more now. I like the fact that basically if you are gentle on a throttle, it drives the same as before but when you press it a little further it pulls like crazy.
Overall, I'm very happy with the tune. Debating replacing spark plugs with one rating colder though.

[p3u]

From the weekend, replaced the PCV in the beast. Not for the faint of heart.

[BOPOH]

From the weekend, replaced the PCV in the beast. Not for the faint of heart.

what were the signs?

[p3u]

what were the signs?

When stationary I started to hear a train horn from a distance all the time, however I wasn't near any tracks... If you hear the train the PCV is going out.

[A6sport]

Painted the seat logos.

I like it...looks cool.

[lnferno]

I like it...looks cool.

Thanks - cheap mod :)

[A6sport]

Finally got the real deal black optics window trim installed. I'm pretty OCD about this car and wrapping the trim just didn't get it for me...

Also had the Alcantara armrest installed...

[Gwillplays]

Finally got the real deal black optics window trim installed. I'm pretty OCD about this car and wrapping the trim just didn't get it for me...

Also had the Alcantara armrest installed...

Car is . Did you order trim as kit or by part numbers from an Audi dealer?


‘16 Mythos Blk A6 3.0t Quattro/20” Vossen CVT/AWE Touring with downpipes/034 drivetrain inserts/Eurocode sways with endlinks/Expel frontend bra/RS7 intake/Loads of Vagcom system mods/Red painted calipers/V1

[Dutch_A6]

Didn't do anything fancy looking but flashed the EPL stage 1, acceleration is markedly improved already.

Sent from my Pixel XL using Tapatalk

[niedzial1983]

Thanks - cheap mod :)

What did you use to paint leather ?

Sent from my SM-G950F using Tapatalk

[lnferno]

What did you use to paint leather ?

Sent from my SM-G950F using Tapatalk

[Arslàán]

Booked for calipers painting

[AUDIofil]

Installed P3 gauge and while it's nice, I'm sick of it already. I can't stand it reflecting in the middle of my side mirror.