Vag-com mod for drl now my high beams dont work.

[stevengrande]

I did the DRL mod to my car today and noticed tonight that my high beams are inoperable. Oddly, when my lights are off and my DRLs are on, the high beam 'flash to pass' works but when I flip the stalk fwd, nada!

Any thoughts?

[airbornerifleman]

What is "the DRL" mod?

If your car is equipped with OEM Bi-xenon, use the code in red. If your car has halogen headlights, you cannot run independent DRL, because there is no independent "DRL" bulb for halogen B7s.


Coding
?xxxx: Chassis
0 = Limousine (PR-K8B)
1 = Avant (PR-K8D)
2 = Cabriolet (PR-K8K)
x?xxx: Driving Light Switch
0 = Rain/Light Sensor (G397) not installed (PR-8K0/8K1/9C6/8K4)
1 = Rain/Light Sensor (G397) installed (PR-8K3/8K7/9C7/8K9)
xx?xx: Trailer Hitch
0 = Trailer Hitch not installed (PR-1D0)
1 = Trailer Hitch installed (PR-1D2)
xxx?x: Headlights
0 = Halogen Headlights w/o Daytime Running Lights (PR-8Q0/8Q1+8K0/8K7)
1 = Halogen Headlights with Daytime Running Lights (PR-8Q0/8Q1+8K1/8K3/9C6/9C7)
2 = Bi-Xenon Headlights with Daytime Running Lights (PR-8Q3/8Q5+8K9/8K4)
3 = Bi-Xenon Headlights w/o Daytime Running Lights (PR-8Q3/8Q5+8K0/8K7)
4 = Bi-Xenon Headlights with Daytime Running/Tail/License Plate Lights (PR-8Q3/8Q5+8K1/8K3)
xxxx?: Country
1 = Rest of World/Nordic Countries/Denmark/Croatia/Baltic Countries with Bi-Xenon
2 = Nordic Countries/Denmark/Croatia/Baltic Countries without Bi-Xenon
3 = USA/Canada with Bi-Xenon
4 = Canada without Bi-Xenon
5 = Special Vehicles

[stevengrande]

I am running halogens and we used XXX12 for a final code. What was odd is the default code for my car came up as XXX03 which is bi-xenon. I've never had bi-xenons...ever.

We coded it so that I have this set up:

Key on, light switch in off position


Key on, light switch in position 1


Key on, light switch in position 2 (fogs on, as well)

[stevengrande]

Bump... for any help w/ the right codes to remedy this.

Anyone...
Bueller..!?

[airbornerifleman]

0 = Halogen Headlights w/o Daytime Running Lights (PR-8Q0/8Q1+8K0/8K7) is stock code for your halogens.

[stevengrande]

0 = Halogen Headlights w/o Daytime Running Lights (PR-8Q0/8Q1+8K0/8K7) is stock code for your halogens.

I know it's supposed to be 0 as default but I would like to keep either my city lights or something on as a DRL. Can I not do that based on my halogen setup?

[fly300kts]

I know it's supposed to be 0 as default but I would like to keep either my city lights or something on as a DRL. Can I not do that based on my halogen setup?

No you can't with Halogen setup

Phil

[stevengrande]

No you can't with Halogen setup

Phil

Well, that sucks. I guess I'll have to REALLY start saving for those new STi's, Phil.

[fly300kts]

Well, that sucks. I guess I'll have to REALLY start saving for those new STi's, Phil.

LOL
Got a set ready to go in the Classified

Phil

[stevengrande]

LOL
Got a set ready to go in the Classified

Phil

You're an evil man, Phil. The good kind of evil, though. Lol!

[fly300kts]

Hahaha

[wildcat333]

Get Phil's lights, Steve! They look real nice!

[stevengrande]

Get Phil's lights, Steve! They look real nice!

I just ordered rims/tires and coil overs...don't get me started! My wife doesn't know about them yet and when she finds out, get the spare bedroom ready, Mike.

[airbornerifleman]

Yes you can have DRL and every thing functioning properly. You have to change your coding to XXX04. I'm not 100% sure on the code, but I know in Canada, Halogen B7s have DRL (All lights minus low beam ON with ignition).