.:Eurocode Tuning:. TRUFit Air Intake System for the B8 S4 and S5 3.0T

[bergaler]

^ seems like I could hardly even hear the whine/wine/wine-o and only from far away .. makes me feel half trashy wanting more whine. bitches love wine

edit: thanks for posting!

[4drian]

^ seems like I could hardly even hear the whine/wine/wine-o and only from far away .. makes me feel half trashy wanting more whine. bitches love wine

edit: thanks for posting!

Video is from a cell phone, so audio probably isn't the best. Honestly, I think it's the perfect amount of whine. more subdued than the roc euro. I imagine cutting the deflector on the airbox will give you more whine. lol bitches love things

[cfritos]

Video is from a cell phone, so audio probably isn't the best. Honestly, I think it's the perfect amount of whine. more subdued than the roc euro. I imagine cutting the deflector on the airbox will give you more whine. lol bitches love things

What is the point of both the deflector and the filter in the grill for? To be, they are just making it more restrictive. I am contemplating taking both of them off, the only negative i see is that you might have to clean the filter more frequently..

[Wusty]

What is the point of both the deflector and the filter in the grill for? To be, they are just making it more restrictive. I am contemplating taking both of them off, the only negative i see is that you might have to clean the filter more frequently..

I just don't understand the hard plastic deflector. It's just odd and very restrictive. The mesh netting in the very front by the grill though I can understand it filtering out the debris that's sucked through. The holes in that netting are like the smallest things I've ever seen. I just cleaned my well. At high suction I really don't think it restricts that much. Just cutting out the plastic thing seriously helped the intake whine so much more. I love it. Not to loud but much much more, actually noticeable now where before, the Eurocode intake didn't have much sound.

[cfritos]

Was it hard to cut off? I am going to try and cut it off with a razor blade knife while the intake is still on. I dont want to take the whole thing off again. The whine isnt as loud as the roc euro correct? I dont want it to be that loud lol.

[Wusty]

Was it hard to cut off? I am going to try and cut it off with a razor blade knife while the intake is still on. I dont want to take the whole thing off again. The whine isnt as loud as the roc euro correct? I dont want it to be that loud lol.

Not even as close to as loud as the Roc Euro. A razor blade will never cut it off. It's freaking thick. You're going to have to take it all apart and take the piece out and use a dremal saw or hack saw. I didn't have a dremel saw so I hacked sawed that sucker off and sanded the edges. I'm a novice at best at this crap and the whole project probably took about an hour give or take.

[cfritos]

Not even as close to as loud as the Roc Euro. A razor blade will never cut it off. It's freaking thick. You're going to have to take it all apart and take the piece out and use a dremal saw or hack saw. I didn't have a dremel saw so I hacked sawed that sucker off and sanded the edges. I'm a novice at best at this crap and the whole project probably took about an hour give or take.

Damn, that sucks, that is just reassuring me that I need to take that thing off, it really makes no sense to have that there, there has to be some better air flow with it gone, wouldnt you agree? And I will probally use a hack saw to take it right off then. Ill sand it down nice and what not so the dealer wont even notice ;)