(Derrek's) - build thread.

[derrek]

Let me know who wants what

PM me for any and all info about the parts and if interested in the whole turbo kit. I will be updating this as parts are sold.

Injector Dynamics 1050X injectors NEW in box ($450)

S3 injectors sub 1k miles ($350)

ARP head studs ($120)

ARP main studs ($100)

ARP cam tower bolts ($50)

IE Tuscan rods ($400)

Built head with all Ferrea parts ($1500)

IE HPFP just replaced by IE has less then 10 miles on it ($600)

Twinscroll T3 turbo manifold with billet collector and Swain Tech coating, Includes downpipe, and hotside charge piping. ($1200)

Oil cooler adapter plate ($50)

Balance shaft delete oil pump makes 22psi hot idle ($400)

[EvolutionArmory]

Tell us more about the Injector Dynamics injectors. Were you going to be using them in the engine or for the port injection part?

[derrek]

Tell us more about the Injector Dynamics injectors. Were you going to be using them in the engine or for the port injection part?

They're port injectors

[derrek]

Let me know who wants what

PM me for any and all info about the parts and if interested in the whole turbo kit. I will be updating this as parts are sold.

Injector Dynamics 1050X injectors NEW in box ($450)

S3 injectors sub 1k miles ($350)

ARP head studs ($120)

ARP main studs ($100)

ARP cam tower bolts ($50)

IE Tuscan rods ($400)

Built head with all Ferrea parts ($1500)

IE HPFP just replaced by IE has less then 10 miles on it ($600)

Twinscroll T3 turbo manifold with billet collector and Swain Tech coating, Includes downpipe, and hotside charge piping. ($1200)

Oil cooler adapter plate ($50)

Balance shaft delete oil pump makes 22psi hot idle ($400)

Price drop, lets get some of this stuff sold so I can show whats next with the car

[derrek]

Let me know who wants what

PM me for any and all info about the parts and if interested in the whole turbo kit. I will be updating this as parts are sold.

Injector Dynamics 1050X injectors NEW in box ($450)

S3 injectors sub 1k miles ($350)

ARP head studs ($120)

ARP main studs ($100)

ARP cam tower bolts ($50)

IE Tuscan rods ($400)

Built head with all Ferrea parts ($1500)

IE HPFP just replaced by IE has less then 10 miles on it ($600)

Twinscroll T3 turbo manifold with billet collector and Swain Tech coating, Includes downpipe, and hotside charge piping. ($1200)

Oil cooler adapter plate ($50)

Balance shaft delete oil pump makes 22psi hot idle ($400)

updated

[derrek]

Little teaser





Sent from my iPhone using Tapatalk

[derrek]

Sent from my iPhone using Tapatalk

[Charles.waite]

Oooh. 3.6?

[derrek]

Oooh. 3.6?

3.2, the 3.6's have cast cranks unless you get one out of a R36.

[canadianA4B7]

Interested to see what’s needed with the front rad support. Doesn’t seem too too long of a motor as it sits in pic.

[derrek]

Interested to see what’s needed with the front rad support. Doesn’t seem too too long of a motor as it sits in pic.

some trimming and a crank pulley

[derrek]

My E46 project is getting close to being done, finally, and I cant wait to start putting the B7 back together. I've got tons of parts that I've been collecting for it so it should go quick. The first projects are going to be intake and exhaust manifolds though. He's some pictures of both cars. E46 is getting the door bars finished and some small tabs for accessories welded on then it'll be off to powder coat and final assembly. B7 I had pulled out to wash, it was starting to get dusty sitting in the garage.

Fixed the pictures

[aluthman]

Yaaaaasssssss!!!! VR6 noises!!!!!

[derrek]

Yaaaaasssssss!!!! VR6 noises!!!!!

yes! Curious to see what I can get out of the G35-1050 and how the 03A is as well.

[Charles.waite]

I love that a fully stripped rolling chassis is “close to being done” for you, haha.

That’s exciting though. VRT swap?! Aiming to be the first AZ guy to get it done? I’m following a dude on Instagram who is buttoning up his VR build. Those engines absolutely rule.

[derrek]

I love that a fully stripped rolling chassis is “close to being done” for you, haha.

That’s exciting though. VRT swap?! Aiming to be the first AZ guy to get it done? I’m following a dude on Instagram who is buttoning up his VR build. Those engines absolutely rule.

Not much is going back on it. There's a few B7's with the swap done already not all of them post much and none on AZ that I know of. Not sure why but most don't build the engine or use really cheap parts that limit the cars.

[derrek]

Someone buy this turbo setup so i have room in my garage.
$2000
1. HTA 3076
2. Twinscroll manifold
3. X2 Turbosmart Comp Gate 40 wastegates
4. Oil feed line with oil restrictor and oil drain lines
5. Coolant lines
6. Downpipe
7. Intake



329965762_548042107425371_6171150736118698570_n.jpg331885487_953087569022394_6008117284815946307_n.jpg329921395_181299321299540_2760650040647940168_n.jpg331809402_888472212440539_4887814439080282823_n.jpg330286615_818268236487027_2309156763400878248_n.jpg329953638_1100232044702626_3094820229218023501_n.jpg329654410_935511231136516_913046575763530462_n.jpg329600645_8825266117544177_7725504021352561999_n.jpg331452618_6247330221957789_4706572193726071992_n.jpg