Unitronic Stage 1+ Only Getting 15psi

[CrazyCal]

It could be the wastegate actuator needs tightened up a bit. Or the N75 valve may be failing (leaking more pressure than it ought to the actuator). A boost leak is another possibility but it sounds like you've ruled that out. As a side note, if you post the logs in text format (csv), or as a google document, then I can graph this so we aren't just staring at numbered boxes.

I'm a little concerned with the very high N75 duty at the top end. I would like to see the same log from a healthy Uni 1+ car to compare.

I don't know if I have any way to host text documents, that's why I post them as pictures. Should I just email it to you? PM me your email.

yeah this part

http://www.ecstuning.com/Audi-B6_A4-...ther/ES523283/

not sure if that's replaced by the 034 kit.

Yeah that's replaced by a billet piece in the 034 kit. I highly recommend that kit.

Sent from the Wretched Hive of Scum and Villainy using tapatalk 2

[walky_talky20]

I don't know if I have any way to host text documents

lol. You can just post the csv text right in as a reply. Let AZ "host" it. Here is an example:

,Group A:,001,,,,Group B:,020,,,,Group C:,034,,,
,0,2320,93,16.4,1101001,0.17,0,0,0,0,0.34,2360,650 ,1.25,B1-S1 OK
,0.51,2360,93,19.5,1100001,0.68,0,0,0,0,0.86,2480, 655,1.25,B1-S1 OK
,1.03,2520,93,8.6,1100001,1.2,0,0,0,0,1.37,2600,66 0,1.25,B1-S1 OK
,1.54,2640,93,-1.6,1101001,1.71,0,0,0,0,1.89,2760,665,1.25,B1-S1 OK
,2.06,2800,93,-1.6,1101001,2.23,0,0,0,0,2.4,2920,675,1.25,B1-S1 OK
,2.57,3000,93,0,1101001,2.74,0,0,0,0,2.92,3200,690 ,1.25,B1-S1 OK
,3.09,3320,93,12.5,1101001,3.26,0,3,0,0,3.43,3560, 720,1.25,B1-S1 OK
,3.6,3640,93,25,1101001,3.77,0,3,0,0,3.94,3880,740 ,1.25,B1-S1 OK
,4.12,4000,93,25,1101001,4.29,3,3,3,6,4.46,4200,77 0,1.25,B1-S1 OK
,4.63,4320,93,25,1101001,4.8,3,3,3,6,4.97,4560,795 ,1.25,B1-S1 OK
,5.15,4640,93,25,1101001,5.32,3,3,3,6,5.49,4840,81 0,1.25,B1-S1 OK

Just post it like that, then I can graph it. If you want, that is.

[Charles.waite]

lol. You can just post the csv text right in as a reply. Let AZ "host" it. Here is an example:

,Group A:,001,,,,Group B:,020,,,,Group C:,034,,,
,0,2320,93,16.4,1101001,0.17,0,0,0,0,0.34,2360,650 ,1.25,B1-S1 OK
,0.51,2360,93,19.5,1100001,0.68,0,0,0,0,0.86,2480, 655,1.25,B1-S1 OK
,1.03,2520,93,8.6,1100001,1.2,0,0,0,0,1.37,2600,66 0,1.25,B1-S1 OK
,1.54,2640,93,-1.6,1101001,1.71,0,0,0,0,1.89,2760,665,1.25,B1-S1 OK
,2.06,2800,93,-1.6,1101001,2.23,0,0,0,0,2.4,2920,675,1.25,B1-S1 OK
,2.57,3000,93,0,1101001,2.74,0,0,0,0,2.92,3200,690 ,1.25,B1-S1 OK
,3.09,3320,93,12.5,1101001,3.26,0,3,0,0,3.43,3560, 720,1.25,B1-S1 OK
,3.6,3640,93,25,1101001,3.77,0,3,0,0,3.94,3880,740 ,1.25,B1-S1 OK
,4.12,4000,93,25,1101001,4.29,3,3,3,6,4.46,4200,77 0,1.25,B1-S1 OK
,4.63,4320,93,25,1101001,4.8,3,3,3,6,4.97,4560,795 ,1.25,B1-S1 OK
,5.15,4640,93,25,1101001,5.32,3,3,3,6,5.49,4840,81 0,1.25,B1-S1 OK

Just post it like that, then I can graph it. If you want, that is.

I thought AZ had character limits.

You could try pastebin.