Quote Originally Posted by MNAudi101 View Post
got the new wheels on, picked them up from a guy here in Minny and then picked up the rubber from a local guy. I then replaced both inner tie rod ends and a outer tie rod end on the driver side. I will be giving Imola motorsports a call in the morning to schedule a alignment.

only picture so far, all cleaned and ready to go in, Center caps should be here on Wednesday then it will be complete:

Since you've now got new tie rods and tires, and you're going lower with coilovers. I would recommend adjustable upper control arms all around, but at a minimum up front. This will dial in your alignment and make your tires last.

I was 23.5"-24.5" fender to ground for 6 years depending on wheel setup, and never had a set of tires last longer than 6 months because of bad camber. Did 034 upper arms all around and now at factory spec'd alignment.