Hi guys. I’m wrapping up a 2.7 build for my Allroad and I’m running in to an issue I can’t resolve. I put a brand new OE from Porsche VSS in and on my first test drive I was getting the “Brake” light on the cluster flashing with 3 beeps, she’d fall on her face when I pressed in the clutch, and letting off the throttle she’d fall on her face and then buck. Also, no speedometer. So, I swapped in my original VSS with no change.

-Can I inspect the tone ring with the transmission in place?
-Can I test the VSS to make sure they’re working on the bench?
-How would you go about checking the harness for a broken wire? Wiring I bury my head in the sand on. I’m assuming continuity, but where and what setting on the multimeter?

Thanks for any help!







Sent from my iPhone using Audizine Forum