Post your wheel/tire setup with pictures and information...

[DanS4]

I am currently running 205 tires. 16x6 They work great in the snow.


stretching tires is dumb.

[ggg20t]

Wheel make/name: OEM C5 RS6
Wheel size: 18x8.5
Offset: ET30
Tires: Continental Extreme Contact DW 225/40/18
Suspension: H&R Coils
Front fenders rolled

Wow this is gorgeous. Where are you at in PA???

[Cadiburns]

BBS CH 19x8.5 et 35
235/35/19
H&R COs

[Korben007]

BBS CH 19x8.5 et 35
235/35/19
H&R COs

Is this car for sale?

[Cadiburns]

Is this car for sale?

Not that I know of...unless you want to make an offer.

[b5nogaros4]

Here's my setup:

Work Emotion CR Kai (5x114.3) using wobble bolts
18x9.5 ET20 front and Rear
235/40/18 Hankook Evo V12's
Front and Rear fenders rolled and pulled

Haven't measured my GTF clearance yet. Just installed new suspension so I'm waiting a few weeks for it to settle first.

Those are by far the nastiest wheels ive seen on a b5 s4 and i want those in gunmetal on my nogaro like asap lol. so sickkkk

[undroath73]

Wow this is gorgeous. Where are you at in PA???

Thanks! Just outside of Reading. Wheels are currently for sale ... http://www.audizine.com/classifieds/...-wheels&cat=47

[ggg20t]

Thanks! Just outside of Reading. Wheels are currently for sale ... http://www.audizine.com/classifieds/...-wheels&cat=47

How about the car? ;)

[sherbet]

How about the car? ;)

^^still lookin for a black one?? Hahaha black sucks! Those wheels on that car are gorgeous, im hoping to have a set of those soon enough. Im an idiot and let my brother take the OEM USP wheels that were on the car when I bought it just because they were in poor shape.

[DanS4]

^^still lookin for a black one?? Hahaha black sucks! Those wheels on that car are gorgeous, im hoping to have a set of those soon enough. Im an idiot and let my brother take the OEM B5 RS4 wheels that were on the car when I bought it just because they were in poor shape.

Where would you buy/find oem b5 rs4 wheels? they would stick out alot Et20

[Cadiburns]

Where would you buy/find oem b5 rs4 wheels? they would stick out alot Et20

Thought the same thing. Just figured it was a typo...or he meant to say OEM-look.

[coolgraymemo]

They wouldn't stick out that much. Just 10mm more than the RS6 wheels.

[DanS4]

They wouldn't stick out that much. Just 10mm more than the RS6 wheels.

OEM RS6. Et30 255 tire. stock fender.
Sqitis now has my Rs6 wheels.

[coolgraymemo]

With a 225/40 it wouldn't stick out as much as with a 255.


That's why I italicized "that."

[JDM EJ1 95]

18x9 F + 28 18x9.5 R + 31 CCW classics 235/40/18s... 10mm spacer up front.(offsets are not exact i measured quickly)

bought these when i had stock body.. now im cut/pulled etc.. semi widebody.. going to bump it up to 245s or 255s soon.

heres some pics as of now




By jdmej195 at 2011-10-23


By jdmej195 at 2011-09-28

stock body shot


By jdmej195 at 2008-10-24

[DiscoPotato]

Those are by far the nastiest wheels ive seen on a b5 s4 and i want those in gunmetal on my nogaro like asap lol. so sickkkk

I almost put a set on mine. But they were 17s so I passed.

[ggg20t]

^^still lookin for a black one?? Hahaha black sucks! Those wheels on that car are gorgeous, im hoping to have a set of those soon enough. Im an idiot and let my brother take the OEM B5 RS4 wheels that were on the car when I bought it just because they were in poor shape.

You go into the garage, jack his car up and steal them. He will never notice! And yes, im still on the search for a black one, I dont know why i love it so much when I know its the most difficult color EVER to keep clean

[undroath73]

Not that I know of...unless you want to make an offer.

My sedan plus cash?? Lol

[S4evr]

B5A4 Celebration wheels, 17 x 7.5 not sure on offset. Koni yellows and vogtland springs

With Sumitumo HTRZ3's 235/45/17


With Altimax Artic's 205/50/17

[Cadiburns]

My sedan plus cash?? Lol

I've already had a black S4 sedan. Sorry.

[DeleriousZ]

Less chatter moar pics!!

[Cadiburns]

Here's my old car but can't find my other pics of it.

BBS RXIIs 18x8.5
225/40/28
H&R Springs & Koni Shocks

[sparkyvw]

Another one that's not my car... but for the sake of keeping this thread alive...

Specs

Rota 18x9.5 et 20
225/40/18 Nankang ns2s
01.5 stock body s4 (fronts are rolled out just a tad as you can see)


Front



Rear

My car NEVER drove like this. It couldnt. Fronts got rolled more. Then the rear was maxed out on camber and the rear fenders rolled out by about 6mm.

[Turbwhistle]

99 B5 a4 avant
st coils
front fenders rolled

D2 S8 wheels- winter set-up i believe they are 18x8 et 38 225/40/18




b5 rs4 reps 18x8 et 35 235/40/18 last summer set up

[DeleriousZ]

Damn sparky, that looks fantastic. Did you do your own rolling?

[sherbet]

Thought the same thing. Just figured it was a typo...or he meant to say OEM-look.

Yes, yes, typo, my apologies. I wasnt thinking at all when I posted that. They were OEM USP wheels. I must've meant to say that but had RS4's in my mind. Heres my setup:

VMR V701
18x8.5
ET35
235/40-18 Continental DWS
Stasis Engineering Street Sport Coilovers
No fender modifications, no rubbing

**drop coming soon along with GTF measurement. will update.


I need brakes

[s4killer]

stock


low

[NOTORIOUS VR]

Would be nice if a mod could clean up this thread... again another thread gone to shit.

[juntsky]

lol it's only gone to shit because people like you are saying it's gone to shit. The only posts in here that are stupid is the one directly above yours and that guy just completely missed the point.

[NOTORIOUS VR]

lol it's only gone to shit because people like you are saying it's gone to shit. The only posts in here that are stupid is the one directly above yours and that guy just completely missed the point.

[careercadaver]

My car NEVER drove like this. It couldnt. Fronts got rolled more. Then the rear was maxed out on camber and the rear fenders rolled out by about 6mm.

Thanks for the heads up. Car looks amazing!!

[happy2B5]

Soon to be summer set-up for the avant (not previously purchased for sedan - long story)

ABT a10's
19x8.5 ET35ish
235/35/19 Conti Extreme DW (summer version)
PSS9's spun to around 25 GTF on all four
Front fenders will need to be rolled - currently rubbing
Rear are perfect - no rubbing (w/8mm spacer in rear)

[highPSI-S4]

Finally got suspension dialed in.

Ground to Fender

Front, 24 1/2

Rear, 24 3/4

[DeleriousZ]

I didn't think those emotions would look good on an S4, you proved me wrong!!

[happy2B5]

how in the hell does that not rub? even if they are rolled, pulled, etc...looks sick btw

[highPSI-S4]

Gracious! It does rub slighty, big dips are another story. Will prob get a stiffer coilover setup and F&R adjustable control arms in the future.

[sherbet]

Gracious! It does rub slighty, big dips are another story. Will prob get a stiffer coilover setup and F&R adjustable control arms in the future.

god do I need adjustable control arms....

..on a side note, just found out I cant drop my car even the slightest as my HFC's rub on my garage entrance. guess its just a reason to get test pipes..

[Blake2423]

My car NEVER drove like this. It couldnt. Fronts got rolled more. Then the rear was maxed out on camber and the rear fenders rolled out by about 6mm.

More info on the wheels please, are they rota grids?

[BITRBO]

I didn't think those emotions would look good on an S4, you proved me wrong!!

From the side, yes. But from that front angle, not so much IMO... Too much offset and stretch/poke for my taste.

The bronze-Imola combo definitely looks nice though

[DeleriousZ]

From the side, yes. But from that front angle, not so much IMO... Too much offset and stretch/poke for my taste.

The bronze-Imola combo definitely looks nice though

IMO The poke is the reason they look good, effectively. The cr-kai's are pretty flat faced once you get closer to the 8" width range, and flat faced cr-kai's are not the best looking wheels out there. With the current concavity of the 9.5" width and decent offset, it looks gooooood. I don't know how high an offset you can run with a 9.5" wide wheel, but the higher the offset, generally the more you lose the concavity of the wheel face.

Sometimes anyway, with the xd-9 series, the lip depth doesn't change for all of the different offsets per certain wheel width, I assume they just add more material to the hub for the lower offsets.

Pay no attention to me, bored at work and rambling.