Audizine - An Automotive Enthusiast Community

Page 1 of 23 12311 ... LastLast
Results 1 to 40 of 891
  1. #1
    Veteran Member Four Rings FrankA6's Avatar
    Join Date
    Mar 30 2008
    AZ Member #
    27087
    My Garage
    2004 A6 2.7T , 2011 A4 2.0T
    Location
    Pittsburgh

    Post your wheel/tire setup with pictures and information...

    Guest-only advertisement. Register or Log In now!
    Since I still get 3-4 messages a week (sometimes more) about wheel and tire fitment for the C5 I figured why not make a thread of all of our setups. Post pictures of wheel size , offset , tire size and if any fender mods were needed to make that setup work. This would be a good reference thread for newcomers or just members looking to switch it up, this way you can get an idea of what size/setup you would like to run before making any big purchases. Since the C5 is getting older and cheaper by the year I see more and more members joining with C5's and wanting information.

    This is for any C5 model A6/S6/RS6/allroad

    List the following. Summer & Winter wheels , OEM or Aftermarket.

    Wheel make/name (BBS LM)
    Wheel size (18x9.0)
    Offset (33-45ET)
    Tire size (245/40/18)
    Suspension (coilovers/h&r sports/stock...etc etc)
    Modifications if needed (fender roll/spacers...etc etc)
    And most of all post 2-4 good images of each setup so that the fitment can been seen clearly.

    Please try to keep the images semi small (800x600ish) so that there is better load time. thanks.

    I'll start with my setups (in no particular order) feel free to join in and add to the thread whenever you get a new setup or have made some changes.

    Also list what car they are on since they all have different sized fenders...etc etc











    2004 A6 2.7T


    OEM Audi RS6 9-Spokes
    18x8.5 30ET
    255/35/18
    Pirelli Pzero allseasons
    H&R sport springs / Koni Yellow struts
    Front fenders need rolled / rear fender liner needs trimmed










    VMR VB3 (BMW CSL Reps) 5x120
    18x9.5 26ET front and back with 5x120>5x112 adapters (19mm)
    225/40/18
    Dunlop DZ101's
    H&R Coilovers 23.5"FTG front and back
    Fronts need rolled with front liner trimmed / rears need fender liner trimmed about 3 inches in.










    Raderwerks Mten-80's
    18x9.0 35ET
    235/40/18
    Falken ZE-912
    Eibach sport springs / Koni FSD Struts
    no fender work needed.









    Rial Daytona Race (2 piece)
    19x8.5 30ET
    235/35/19
    General Exclaims
    Eibach sport springs / Koni FSD Struts
    Front fenders need rolled / rear liner needs trimmed








    Audi A6/RS6 reps
    18x8.5 35ET
    235/40/18
    Kumho Ecsta ASX allseasons
    Eibach sport springs / Koni FSD Struts
    No fender work needed






    Hartmann B5 RS4 reps
    18x8.5 20ET
    225/40/18
    Dunlop DZ101's
    Eibach sport springs / Koni FSD Struts
    fronts need rolled / rears need liner trimmed










    Hartmann B5 RS4 reps
    18x8.5 17ET (3mm spacers)
    235/40/18
    General Exclaims
    Eibach sport springs / Koni FSD Struts
    fronts need rolled / rears need liner trimmed






    OEM Audi 4.2 Pie plates
    17x8.0 35ET
    235/45/17
    Kumho Ecsta LX Platinum
    H&R coilovers / 25.5" FTG
    no fender work needed








    I had 3 other sets but they were just 17" OEM/rep wheels , if I find pictures of them I'll post up.


    now everyone else join in
    2004 A6 2.7T

  2. #2
    Veteran Member Four Rings 8520's Avatar
    Join Date
    Feb 07 2008
    AZ Member #
    25012
    My Garage
    04 Silverado V8, 06 Touareg V8, 03 RS6 V8TT, 01 allroad, 01 A6 6MT
    Location
    The boonies, near Seattle

    2000 A6, narrow body.

    BBS RC. 18x8.5, et 32 (iirc). Not sure on tire size. Eibach sport springs, bilstein shocks in front, stock in rear.



    Hartmann LM Replicas. 19x8.5, et25 in front, et 20 in rear (both with spacers) 235/35/19. Eibach sport springs, bilstein shocks in front, stock in rear.





    B6 A4 wheels. 17x7.5, et 45. These are my winters, but the tires pictured are pre winter tires.



    Mercedes C63 Replicas. 19x8.5 Front et30, 19x9.5 Rear et32, et's accounting for 18mm spacers. 225/35/19 Dunlop Direzzas. H&R race springs, bilstein shocks front, stock rear.





    I will update this in the spring once I get my coils on and my new wheels on. Expect more slam & more stretch on some 9" wide wheels.
    Last edited by 8520; 11-21-2011 at 11:12 PM.
    -dre

  3. #3
    Veteran Member Four Rings khalimadeath's Avatar
    Join Date
    Nov 18 2009
    AZ Member #
    50945
    My Garage
    70 VW Bus, 64 VW Bus, B8 A4
    Location
    Reno NV

    As i think this is a great thread i dont believe people truely understand the whole "wheel fitment" math as in offset, width ect.. witch spurs on the questions being you know the in's and out's of C5 fitment. Not that nobody else in here does, but you are the most advertised cause your car is perfect.
    -Zach-

    The C5 Union////////////

    The United States Constitution
    (c) 1791. All Rights Reserved

  4. #4
    Veteran Member Four Rings Vinchenzo51's Avatar
    Join Date
    Jan 31 2010
    AZ Member #
    54269
    My Garage
    S-Line A6
    Location
    East Haven, CT

    Chance to whore my car out? SURE!

    OEM S-Line 9 Spokes
    17x7.5
    ET45
    225/45/17
    OEM S-Line Suspension
    (Just refinished the 1 in the back... thats why the front looks like ass lol)



    MB Brabus Monoblock VI
    18x8
    F-ET20 R-ET30
    235/40/18
    OEM S-Line Suspension
    Front fenders needed to be rolled, still had rubbing





    OEM B6S4 Avus
    18x8
    ET45
    225/40/18
    Koni Adj&Eibach Springs
    Very low clearance to the suspension, but perfect for winter, no snow on the paint that way being so sunken in



    BBS CH
    18x8
    ET35
    245/35/18
    OEM S-Line Suspension


    BBS LM
    18x9.5
    ET20
    225/40/18 (not shown)
    H&R Coilovers
    Major fender rolling/light pulling and fender liner trimming




    VMR V710
    18x9.5
    ET33
    F-225/40/18 R-235/40/18
    H&R Coilovers
    Fender rolling/light pulling and fender liner trimming




    Still looking for more pics to upload with some better angles
    Last edited by Vinchenzo51; 11-22-2011 at 07:20 PM.

  5. #5
    Veteran Member Four Rings ENDEE666's Avatar
    Join Date
    May 04 2007
    AZ Member #
    17761
    My Garage
    A6 2.7T 6MT Modded. Allroad 2.7T 6MT.
    Location
    LI,NY

    Frank just wants another opportunity to show Wheel Whore status...
    01 A6 2.7T, blk/blk, 6MT, SSP Tuned!, 3,996 lbs w/ me, full weight, street tires, 29+lb wheels.
    Ran an 11.8 @ 119 at MIR - Sept 2008. FIRST A6 IN THE 11's!
    Also 04 Touareg 4.2 89k with 22x10s

  6. #6
    Veteran Member Four Rings FrankA6's Avatar
    Join Date
    Mar 30 2008
    AZ Member #
    27087
    My Garage
    2004 A6 2.7T , 2011 A4 2.0T
    Location
    Pittsburgh

    Quote Originally Posted by ENDEE666 View Post
    Frank just wants another opportunity to show Wheel Whore status...
    No for real, I get so many msg's, It would be nice to have a thread for people to check.

    I mean we have threads for useless shit like face thread or what did you do today??? At least if we get all of us posting in here it will be so much info to others.

    It is a forum and people join it for help, so why not make a thread dedicated to the most asked questions on here?
    2004 A6 2.7T

  7. #7
    Veteran Member Four Rings FrankA6's Avatar
    Join Date
    Mar 30 2008
    AZ Member #
    27087
    My Garage
    2004 A6 2.7T , 2011 A4 2.0T
    Location
    Pittsburgh

    Quote Originally Posted by khalimadeath View Post
    As i think this is a great thread i dont believe people truely understand the whole "wheel fitment" math as in offset, width ect.. witch spurs on the questions being you know the in's and out's of C5 fitment. Not that nobody else in here does, but you are the most advertised cause your car is perfect.
    And if this thread gets going it would be a perfect place for people to learn fitment.

    Wheel fitment is very simple math, I do know the in's and out's of the C5 but I could go buy a 350Z or M3 tomorrow and know the in's and out's to those cars within hours. Its not hard.

    And if your not good with fitment and own a C5 just think how easy it would be to pick out a car you like in the thread then buy the same size wheels/tires and suspension as that car, it would be so easy and save you time and money.

    Besides, the C5 section is looking a little dead.
    2004 A6 2.7T

  8. #8
    Veteran Member Four Rings 8520's Avatar
    Join Date
    Feb 07 2008
    AZ Member #
    25012
    My Garage
    04 Silverado V8, 06 Touareg V8, 03 RS6 V8TT, 01 allroad, 01 A6 6MT
    Location
    The boonies, near Seattle

    I agree. This forum has been slow as of late. Updated my first post.
    -dre

  9. #9
    Veteran Member Four Rings VJ's A6's Avatar
    Join Date
    Jan 23 2007
    AZ Member #
    15071
    My Garage
    2000 TL; 2002 GMC 1500 Pickup
    Location
    NY

    Quote Originally Posted by ENDEE666 View Post
    Frank just wants another opportunity to show Wheel Whore status...
    Exactly what I thought when I saw the post .. But, this is a great idea...

    APR Stage 2
    -Koni's / H&R Sport -Hotchkis Sway Bar F+ R - 2.5 Inch Custom DP's - 2.5 Inch Magnaflow Exhaust -LED Tail Lights -S6 Door Blades -Valentine V1 -35 % Tints All Around

  10. #10
    Veteran Member Four Rings ENDEE666's Avatar
    Join Date
    May 04 2007
    AZ Member #
    17761
    My Garage
    A6 2.7T 6MT Modded. Allroad 2.7T 6MT.
    Location
    LI,NY

    Quote Originally Posted by FrankA6 View Post
    No for real, I get so many msg's, It would be nice to have a thread for people to check.
    I'm totally sure you do, and many have been from me hahaha... I agree this is an awesome idea. I have to dig up all of my older setups and compile my own contribution..

    After you shared with me that website, I bother you (slightly) less lol... Feels like the right time to share with the rest - http://www.willtheyfit.com/

    That will allow anyone to mess with offset/tire options. Frank + that site = my actual complete understanding of offsets & fitments!!!
    01 A6 2.7T, blk/blk, 6MT, SSP Tuned!, 3,996 lbs w/ me, full weight, street tires, 29+lb wheels.
    Ran an 11.8 @ 119 at MIR - Sept 2008. FIRST A6 IN THE 11's!
    Also 04 Touareg 4.2 89k with 22x10s

  11. #11
    Veteran Member Three Rings Calimus's Avatar
    Join Date
    Oct 26 2010
    AZ Member #
    66197
    My Garage
    88' Scirocco, 89' Cabriolet, 16' A3 E-Tron, 05' FJR1300
    Location
    NW Georgia

    Audi A8 Turbines
    19x8.5 45ET
    245/35/19
    Falken FK 452
    Factory sport suspension



    William

    12' 3.0T A6 Prestige - The white whale
    02' 2.7t A6 - Gone but not forgotten

  12. #12
    Veteran Member Four Rings FrankA6's Avatar
    Join Date
    Mar 30 2008
    AZ Member #
    27087
    My Garage
    2004 A6 2.7T , 2011 A4 2.0T
    Location
    Pittsburgh

    Quote Originally Posted by ENDEE666 View Post
    I'm totally sure you do, and many have been from me hahaha... I agree this is an awesome idea. I have to dig up all of my older setups and compile my own contribution..

    After you shared with me that website, I bother you (slightly) less lol... Feels like the right time to share with the rest - http://www.willtheyfit.com/

    That will allow anyone to mess with offset/tire options. Frank + that site = my actual complete understanding of offsets & fitments!!!
    No problem, I'm always down for helping anyone and it doesn't bother me, But with this thread people can actually see what they want.

    And Nick, I'm sure I bothered you just as much for the wide tire info lol, I need to get some 275 R compounds with pulled fenders and 18x9.5's
    2004 A6 2.7T

  13. #13
    Veteran Member Four Rings v8a6's Avatar
    Join Date
    Aug 25 2010
    AZ Member #
    63236
    My Garage
    08 Porsche 911 C4s, 07 Audi v10 S6, 07 Audi A4 Avant, 04 Boxster S
    Location
    Toronto

    Great pics!

    Here is mine...

    2000 A6 4.2 6speed
    MB Battle
    18x9.5 et15
    BFG KDW 255/35/18
    H&R Sport springs (coilovers hopefully before the spring)
    Cut the fender liner in the front and rear, and rolled the aluminum front fenders

    Last edited by v8a6; 11-22-2011 at 05:12 PM.

  14. #14
    Stage 3 Forum Advertiser Four Rings VMRWheels's Avatar
    Join Date
    Jun 14 2005
    AZ Member #
    6871
    Location
    Anaheim, CA

    Great idea, guys!

    Brandon @ VMR Wheels

    Brandon@Velocitymotoring.com | 714.442.7916 Ext 108 | www.velocitymotoring.com| Instagram | | | Blog

  15. #15
    Veteran Member Three Rings patrick23's Avatar
    Join Date
    Dec 09 2009
    AZ Member #
    51871
    My Garage
    2004 Audi A6 S-line, 2001 Nissan Pathfinder SE, 1999 Subaru Legacy Outack Limited
    Location
    val-des-monts quebec

    I didn't change wheels that much- but the car changed :) 2004 A6 2.7t s-line

    OEM 17" s-line wheels (used as winters even though the car was parked for winter)- sold once the BBK came on, they didn't clear
    235/45/17
    lowered on H&R Sport Springs


    ************************************************** ****************************
    19x8.5 et35 black and machined RS4 reps
    235/35/19 kumho ecsta spt,
    lowered on H&R Sport Springs



    ************************************************** ****************************
    present look
    19x9.5 miro 111 et40
    235/35/19 Hankook v12
    st coilover @23.5" ftg
    front fenders rolled
    Brembo BBK
    15mm forge spacers (front) (required to clear Brembo calipers)
    20mm forge spacers (rear)


    Last edited by patrick23; 11-22-2011 at 06:37 PM.

  16. #16
    Veteran Member Four Rings Vinchenzo51's Avatar
    Join Date
    Jan 31 2010
    AZ Member #
    54269
    My Garage
    S-Line A6
    Location
    East Haven, CT

    I love where this thread is going

    Updated my post, still trying to find more pics with better angles. Keep em coming guys!

  17. #17
    Veteran Member Three Rings patrick23's Avatar
    Join Date
    Dec 09 2009
    AZ Member #
    51871
    My Garage
    2004 Audi A6 S-line, 2001 Nissan Pathfinder SE, 1999 Subaru Legacy Outack Limited
    Location
    val-des-monts quebec

    gives a history of the car at the same time!!

  18. #18
    Senior Member Two Rings ACHAHockey's Avatar
    Join Date
    Aug 17 2009
    AZ Member #
    46525
    My Garage
    996 911 turbo
    Location
    Buffalo, NY

    18x9.5 Raderwerks, 3.5" lip
    275/35/18 Nexens
    lowered on H&R coils
    15mm spacers in front/20mm in rear
    all liners out




    welcome back (2) by R. Hallock, on Flickr


    10/8/2011 by R. Hallock, on Flickr
    2000 A6 4.2 - 18x9.5 Raderwerks, 275/35s, Vibrant mufflers, H&R coilovers, 25mm spacers in rear - 15 mm in front, Pioneer P2300 in-dash.
    2002 911 turbo - custom "straight" exhaust, PSS10s, GT2 control arms, GT2 clutch/plate/slave, bigger DVs.
    2007 STi shit box - too much to list.

  19. #19
    Established Member Two Rings OZAR's Avatar
    Join Date
    Jan 25 2011
    AZ Member #
    69968
    My Garage
    JK Rubicon 4DR (Modified)
    Location
    Brisbane Australia

    Sorry ppl, I suck @ this posting images thing...

    [IMG][/IMG]

    03 allroad 2.7T
    18 x 8.5 OEM rims
    245 x 45 x R18's K39's
    Arnott Gen 2's
    Hotchkis Swaybars

    Not as cool as others above, but better than the OEM stock options...
    Removing tuned components from 03 allroad, refitting OEM...

    Completed stripping 04 RS6 Avant... Searching for donor C5 AR, still have that crazy idea of building an AR6...

  20. #20
    Veteran Member Three Rings Avantmaniac's Avatar
    Join Date
    Feb 21 2007
    AZ Member #
    15832
    My Garage
    2011 S5/2011 A4 AVANT
    Location
    Houston, TX, USA

    Does Allroad welcome in this thread?

    OEM S5 19x8.5
    Sumitomo HTR III 255x19x40
    12mm spacers front and 15mm rear

    - iKe -
    2011 S5
    2011 A4 Avant

  21. #21
    Veteran Member Three Rings
    Join Date
    Feb 13 2008
    AZ Member #
    25205
    Location
    SoCal

    Great thread Frank...def nice to see everyone's various setups.

  22. #22
    Veteran Member Four Rings ENDEE666's Avatar
    Join Date
    May 04 2007
    AZ Member #
    17761
    My Garage
    A6 2.7T 6MT Modded. Allroad 2.7T 6MT.
    Location
    LI,NY

    Quote Originally Posted by FrankA6 View Post
    No problem, I'm always down for helping anyone and it doesn't bother me, But with this thread people can actually see what they want.

    And Nick, I'm sure I bothered you just as much for the wide tire info lol, I need to get some 275 R compounds with pulled fenders and 18x9.5's
    There is currently some 275s on my car as of yesterday hehe... Coming off tho. The offset on the 9.5's puts the tire too far out. Its an et33. For these, for winter, I might run 245 all around. Then a different offset 9.5 and go to 265. But as far as R compunds, my 245 R compunds have never let me down. The grip with those is unreal. You would need BIG hp/tq to break loose 275s all around!!

    Those damn 4.2 & Allroad guys can run 275s no problem.... Grrrrrr

    Still compiling (looking for) pics. I will def add at least 5-7 different sets of wheels worth of pics.
    01 A6 2.7T, blk/blk, 6MT, SSP Tuned!, 3,996 lbs w/ me, full weight, street tires, 29+lb wheels.
    Ran an 11.8 @ 119 at MIR - Sept 2008. FIRST A6 IN THE 11's!
    Also 04 Touareg 4.2 89k with 22x10s

  23. #23
    Senior Member Two Rings Audiudo's Avatar
    Join Date
    Jun 05 2009
    AZ Member #
    43374
    My Garage
    2003 ZX6-R
    Location
    New York

    Got the car brand new in 04 and had a bad chrome obsession in its early years. I know it needs to be dropped! Every picture shows it on OEM S-Line suspension so I didn't need to do any modification to fenders.

    Stern ST-2
    18x8.5
    ET35 w/5mm spacers front and rear
    245/40/18






    TSW Bremma
    18x8.5
    ET35
    245/40/18








    Gianelle Spezia 5
    19x8.5
    ET35
    235/35/19







    Iforged Aero
    19x8.5
    ET 30 Front ET 25 Rear
    235/35/19





    04.A6.S-Line.Team.A.C.E.

  24. #24
    Veteran Member Four Rings 8520's Avatar
    Join Date
    Feb 07 2008
    AZ Member #
    25012
    My Garage
    04 Silverado V8, 06 Touareg V8, 03 RS6 V8TT, 01 allroad, 01 A6 6MT
    Location
    The boonies, near Seattle

    ^ Take that off any sweet jumps?
    -dre

  25. #25
    Veteran Member Four Rings ENDEE666's Avatar
    Join Date
    May 04 2007
    AZ Member #
    17761
    My Garage
    A6 2.7T 6MT Modded. Allroad 2.7T 6MT.
    Location
    LI,NY

    OK, finally compiled mine. There is 1 set I had that is missing, but literally only had for a week & sold them because I didn't like them and re-sold them. Only a few pics of some of them, I will add if I find more..

    Aside from stock wheel pic, ALL others my car had H&R Sport Springs & Bilsteins.

    Stock when I got it.
    17x7.5 OEM BBS et43. 235/45/17 Toyo Proxes 4, OEM Sport Suspension (same as S-Line).


    Next 19x8.5 et35 Moda R6, 235/35/19 Nitto 555.


    Next 18x8.5 et30 AMG Reps (Audi center caps), 235/40/18 Falken FK452. Slight roll on front fenders.




    Next 18x8 et35 R8 Reps, 235/40/18 Falkens. Only kept for a month. 5mm spacers in rear (optional).



    Next was the ones I sold right away, no pics.
    Then I went with the AMG Reps again, but this time in Atlas Gray Metallic (painted, an Audi color lighter than Dolphin Gray but close). Again in 18x8.5 et30, 235/40/18. I have more/better pics of these somewhere I will add..






    Then I also have my summer/track/spirited driving setup. 17x8 et35 Kosei T1 (17 lbs) in satin black, 245/45/17 Falken Azenis R Compound. EPIC GRIP! Slightly more front rolling needed.

    The tread




    Last edited by ENDEE666; 11-24-2011 at 10:25 PM.
    01 A6 2.7T, blk/blk, 6MT, SSP Tuned!, 3,996 lbs w/ me, full weight, street tires, 29+lb wheels.
    Ran an 11.8 @ 119 at MIR - Sept 2008. FIRST A6 IN THE 11's!
    Also 04 Touareg 4.2 89k with 22x10s

  26. #26
    Senior Member Two Rings Audiudo's Avatar
    Join Date
    Jun 05 2009
    AZ Member #
    43374
    My Garage
    2003 ZX6-R
    Location
    New York

    ^ so clean! It looked good with every set you had on there! The track set-up is sweet!
    04.A6.S-Line.Team.A.C.E.

  27. #27
    Senior Member Three Rings Auda's Avatar
    Join Date
    May 13 2009
    AZ Member #
    42479
    My Garage
    2000 Audi A6 2.7 BiTurbo Q
    Location
    Trondheim Norway

    Narrowbody Avant.

    OZ futura 18"x8.5" et 32 front and 18"x9" et 35 rear. No fender rolling. +10mm spacers front and rear. So et 22 front and et 25 rear.





    BBS RS2 18"X8.5" et 32 front and 18"x10" et40 rear. +10mm spacers front and rear. So et 22 front and et 30 rear.


  28. #28
    Veteran Member Four Rings CALL AAA's Avatar
    Join Date
    May 15 2005
    AZ Member #
    6505
    My Garage
    '02 S6, '09 Jetta TDI, '12 S5
    Location
    San Diego

    2002 S6
    OEM B6 S4 Avus wheels
    18x8 45ET plus 22/25 mm spacers, f/r
    255/35/18
    Michelin Pilot Super Sport
    H&R coilovers
    No fender work, but they rub a bit with 3 people and bags in the car.




    The wheels easily clear 355 mm Brembos in front.


    Tony

    '02 S6 Tip, but that's going away (just the Tip)
    '13 VW Touareg TDI with 8 speeds. Count 'em, 1-2-4-5-7-8!
    '12 S5 now with wheels from...a different S5

    I stopped a helicopter with my face.

  29. #29
    Veteran Member Four Rings beemercer's Avatar
    Join Date
    Aug 14 2008
    AZ Member #
    31944
    My Garage
    '90 Cq - '13 R
    Location
    obamaland

    widebody
    ssr comps
    17"x8.5"
    et35 w/ 15mm spacer
    255 Hankook RS3s (they measure out a bit over 10-3/4" so more like a 275 width)

    You represent the idiocy of today.

  30. #30
    Veteran Member Four Rings v8a6's Avatar
    Join Date
    Aug 25 2010
    AZ Member #
    63236
    My Garage
    08 Porsche 911 C4s, 07 Audi v10 S6, 07 Audi A4 Avant, 04 Boxster S
    Location
    Toronto

    Looks great, Beemercer.

    I just picked up some OEM RS4 wheels.
    19x9
    et29 + 15mm spacer = et14
    255/35/19





    more pics...

  31. #31
    Veteran Member Four Rings Vinchenzo51's Avatar
    Join Date
    Jan 31 2010
    AZ Member #
    54269
    My Garage
    S-Line A6
    Location
    East Haven, CT

    Oh you silly wide body guys and your crazy offsets

  32. #32
    Veteran Member Four Rings v8a6's Avatar
    Join Date
    Aug 25 2010
    AZ Member #
    63236
    My Garage
    08 Porsche 911 C4s, 07 Audi v10 S6, 07 Audi A4 Avant, 04 Boxster S
    Location
    Toronto

    Quote Originally Posted by Vinchenzo51 View Post
    Oh you silly wide body guys and your crazy offsets
    LOL. Hey, the flared fenders are one of the main reasons why I love this car, and have had two of them. So I try and take full advantage of the extra width.

    Gotta have something to make up for the crappy transmissions (gone through two of those too, before the 6speed swap) and lack of turbos :)

  33. #33
    Veteran Member Four Rings 8520's Avatar
    Join Date
    Feb 07 2008
    AZ Member #
    25012
    My Garage
    04 Silverado V8, 06 Touareg V8, 03 RS6 V8TT, 01 allroad, 01 A6 6MT
    Location
    The boonies, near Seattle

    I vote this get sticked.
    -dre

  34. #34
    Veteran Member Four Rings Vinchenzo51's Avatar
    Join Date
    Jan 31 2010
    AZ Member #
    54269
    My Garage
    S-Line A6
    Location
    East Haven, CT

    Quote Originally Posted by 8520 View Post
    I vote this get sticked.
    Either that, or add it to the Tech Section

  35. #35
    Registered User Three Rings
    Join Date
    Nov 17 2011
    AZ Member #
    84056
    Location
    Aberdeen, MD

    Vogtland Coilovers
    Miro STP-3 19x9.5 et40
    front- 13mm spacer = et27
    rear- 15mm spacer = et25
    Goodyear 245/35/19
    Front fenders rolled




  36. #36
    Veteran Member Four Rings ENDEE666's Avatar
    Join Date
    May 04 2007
    AZ Member #
    17761
    My Garage
    A6 2.7T 6MT Modded. Allroad 2.7T 6MT.
    Location
    LI,NY

    Damn wide bodies...,... Looks SICK!!
    01 A6 2.7T, blk/blk, 6MT, SSP Tuned!, 3,996 lbs w/ me, full weight, street tires, 29+lb wheels.
    Ran an 11.8 @ 119 at MIR - Sept 2008. FIRST A6 IN THE 11's!
    Also 04 Touareg 4.2 89k with 22x10s

  37. #37
    Veteran Member Three Rings Castor Troy's Avatar
    Join Date
    Dec 17 2008
    AZ Member #
    36485
    Location
    Billings, MT

    Quote Originally Posted by Jason@NGPRacing View Post
    Vogtland Coilovers
    Miro STP-3 19x9.5 et40
    front- 13mm spacer = et27
    rear- 15mm spacer = et25
    Goodyear 245/35/19
    Front fenders rolled
    fuck. looking at your setup, i dont think i got big enough spacers :( :( :(

    we'll see tuesday
    AEB: Boost goes in, valves come out.
    2003 Audi S6

  38. #38
    Veteran Member Four Rings EErie B6's Avatar
    Join Date
    May 30 2008
    AZ Member #
    29363
    My Garage
    Honda HRX
    Location
    Penna.

    Wheel make/name: Hartmann HRS4-204-GS
    Wheel size: 19x8.5
    Offset: ET25 with 20mm spacers for a final of ET05
    Tire size: 245/40R19 Bridgestone Potenza RE760s
    Suspension: stock air 402'd down
    Modifications: None

    Level II:


    Level I:


    Level I:

  39. #39
    Veteran Member Four Rings ENDEE666's Avatar
    Join Date
    May 04 2007
    AZ Member #
    17761
    My Garage
    A6 2.7T 6MT Modded. Allroad 2.7T 6MT.
    Location
    LI,NY

    Thats a sexy AR... Great stance. How do you like the Bridgestone 760s?

    Oh, and "damn wide bodies".....
    01 A6 2.7T, blk/blk, 6MT, SSP Tuned!, 3,996 lbs w/ me, full weight, street tires, 29+lb wheels.
    Ran an 11.8 @ 119 at MIR - Sept 2008. FIRST A6 IN THE 11's!
    Also 04 Touareg 4.2 89k with 22x10s

  40. #40
    Veteran Member Three Rings Castor Troy's Avatar
    Join Date
    Dec 17 2008
    AZ Member #
    36485
    Location
    Billings, MT

    Wheel make/name:ESM ESM-004 (BBS LM Reps)
    Wheel size: 17x8
    Offset: +32ET with 10mm spacers, +22 total
    Tire size: 225/45/17
    Suspension: Stock S6
    Modifications: 10mm spacers to clear front calipers



    AEB: Boost goes in, valves come out.
    2003 Audi S6

Page 1 of 23 12311 ... LastLast


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2019 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.