Audizine - An Automotive Enthusiast Community

Results 1 to 6 of 6

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Veteran Member Four Rings getslideways's Avatar
    Join Date
    May 16 2008
    AZ Member #
    28851
    Location
    WA

    01E Center Diff: Does This Amount Of Slop Seem Normal? **Video**

    I am doing a trans rebuilt for a locked up 1-2 collar, and was thinking of doing the 4:1 washer mod before reinstalling the center diff. I was looking over the center diff to gauge its condition, and see if there was any pitting or wear marks, but it looks good physically. However, I was wondering if this amount of slack/slop was normal with the "window gears"? I made a quick video, hopefully it helps show what I am talking about. You may need to turn your volume up to hear the "clink" when the gears start feeling resistance. Since i have never dealt with a center torsion diff before, i have nothing to compare it to. Anyone with some experience with these, please feel free to chime in. Or if there is any procedure for checking the tolerances and what they should be, that would be very useful as well. Thank you!


    **EDIT** Added the second video showing the internal view this morning... everything still seem ok? Just want to double check before doing the washer mod



    .
    .
    Last edited by getslideways; 10-24-2011 at 11:09 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.