Help with symphony 2+ in 04 usp.

**deadsoldier** · 10-11-2011 05:15 PM

So my friend gave me a symphony 2+ as he upgraded to an rns-e and when i went ahead to install it i wasnt very succesful.
I purchased an RNS-E Adapter on ebay for around $45. When i went to install it, i can hear the cd changer cycling, but when I press the power on button it doesnt turn on or anything.

I'm not sure if its the unit or the adapter itself. Anyone else have this problem? I'll probably end up making sure that the adapter is making the connections correctly, but i just wanted some advice from anyone on here if they can help out.
Thanks.

and south bend clutch ftw.. just installed it today gotta love the stock feel in a stage 3 clutch. :)

Btw anyone heading out to Englishtown New Jersey on Sunday?

**Charles.waite** · 10-11-2011 05:24 PM

Originally Posted by deadsoldier

So my friend gave me a symphony 2+ as he upgraded to an rns-e and when i went ahead to install it i wasnt very succesful.
I purchased an RNS-E Adapter on ebay for around $45. When i went to install it, i can hear the cd changer cycling, but when I press the power on button it doesnt turn on or anything.

I'm not sure if its the unit or the adapter itself. Anyone else have this problem? I'll probably end up making sure that the adapter is making the connections correctly, but i just wanted some advice from anyone on here if they can help out.
Thanks.

and south bend clutch ftw.. just installed it today gotta love the stock feel in a stage 3 clutch. :)

Btw anyone heading out to Englishtown New Jersey on Sunday?

I believe the RNS-E adapter is different than a Symphony II+ adapter. They have the same connector, but the pins are different. Its possible you can swap the pins around to work. Someone posted on here a week ago with this same problem. I cant find the thread right now though. Check the audio specific forum....

**deadsoldier** · 10-11-2011 06:20 PM

Originally Posted by Charles.waite

I believe the RNS-E adapter is different than a Symphony II+ adapter. They have the same connector, but the pins are different. Its possible you can swap the pins around to work. Someone posted on here a week ago with this same problem. I cant find the thread right now though. Check the audio specific forum....

That explains why it didnt work, guess ill have to work with the pins.. will look into it thursday.. thx :)

**MikTip** · 10-11-2011 06:27 PM

Have you seen this-

http://forums.audiworld.com/showthread.php?p=20552593

**MikTip** · 10-11-2011 06:29 PM

Also-

http://sites.google.com/site/nsxjraudi/downloads

**MikTip** · 10-11-2011 06:31 PM

This too-

http://www.audizine.com/forum/showth...hony-2-Upgrade

**deadsoldier** · 10-11-2011 06:34 PM

Originally Posted by MikTip

This too-

http://www.audizine.com/forum/showth...hony-2-Upgrade

ive checked the first and last post, but like charles said, i think i have the harness for the nav and it might differ slightly for the symphony 2+, thx for the links though. ill check out the second link closely seems very useful.

**MikTip** · 10-11-2011 06:37 PM

I have a Kauftec harness...had to swap a couple pins around to get my SII+ to finally work...
I used some wire diagrams from a fellow forum member to match up everything...

**deadsoldier** · 10-11-2011 06:40 PM

Originally Posted by MikTip

I have a Kauftec harness...had to swap a couple pins around to get my SII+ to finally work...
I used some wire diagrams from a fellow forum member to match up everything...

any chance u still have those diagrams?