Audizine - An Automotive Enthusiast Community

Results 1 to 5 of 5
  1. #1
    Stage 2 Banner Advertiser Four Rings Hugh@EuropaParts's Avatar
    Join Date
    Aug 22 2010
    AZ Member #
    63043
    Location
    Piscataway, NJ

    :: EuropaParts.com :: STaSIS R8 Exhaust

    Guest-only advertisement. Register or Log In now!
    We have received a limited quantity of STaSIS R8 Exhausts for both the V8 and V10 R8!
    STaSIS Exhaust (R8, 4.2L)


    The STaSIS R8 V8 4.2L Exhaust System replaces the OEM muffler assembly located behind factory V-band connection. The system was designed to specifically fit the R8 with the 4.2L V8, and fits both the manual and R-Tronic equipped cars.

    • All pipes on the STaSIS exhaust system are made of T-304 Stainless Steel and precisely shaped with a CNC mandrel bender to insure an easy and direct bolt-in replacement.
    • All mounting and support plates are precisely manufactured on a CNC laser cutting table.
    • All welds are back gassed using the TIG method for cleanliness, precision and strength.
    • The exhaust is mounted with the existing OEM exhaust hangers.
    • The single muffler setup used on the OEM system is replaced with a dual muffler design incorporating a “X” style crossover. This allows a small portion of the exhaust pulses from opposing cylinder banks to cross over, creating a vacuum for the next pulse coming through the exhaust. This effect helps create power by reducing the back pressure pulses behind the engine to negative levels.
    • The STaSIS muffler design gives an exhaust note that is noticeably deeper and stronger at all throttle applications while maintaining a tone that is not intrusive or “droning” at normal everyday driving speeds.
    • The tail pipes extend into the factory exhaust tips mounted in the rear bumper cover and require no bumper or tip modifications.
    • The STaSIS exhaust is 30 pounds lighter than the stock unit.



    The result of STaSIS' engineering is a museum-quality piece that will awaken your R8
    The STaSIS R8 V10 5.2L Exhaust System replaces the OEM muffler assembly located behind factory V-band connection. The system was designed to specifically fit the R8 with the 5.2L V10, and fits both the manual and R-Tronic equipped cars.
    • All pipes on the STaSIS exhaust system are made of T-304 Stainless Steel and precisely shaped with a CNC mandrel bender to insure an easy and direct bolt-in replacement.
    • All mounting and support plates are precisely manufactured on a CNC laser cutting table.
    • All welds are back gassed using the TIG method for cleanliness, precision and strength.
    • The exhaust is mounted with the existing OEM exhaust hangers.
    • The single muffler setup used on the OEM system is replaced with a dual muffler design incorporating a “X” style crossover. This allows a small portion of the exhaust pulses from opposing cylinder banks to cross over, creating a vacuum for the next pulse coming through the exhaust. This effect helps create power by reducing the back pressure pulses behind the engine to negative levels.
    • The STaSIS muffler design gives an exhaust note that is noticeably deeper and stronger at all throttle applications while maintaining a tone that is not intrusive or “droning” at normal everyday driving speeds.
    • The tail pipes extend into the factory exhaust tips mounted in the rear bumper cover and require no bumper or tip modifications.
    • The STaSIS exhaust is 30 pounds lighter than the stock unit.



    The result of STaSIS' engineering is a museum-quality piece that will awaken your R8.



    If you have any questions please feel free to give us a call.
    FREE SHIPPING!
    Last edited by Hugh@EuropaParts; 10-06-2011 at 12:55 PM.
    Hugh
    EuropaParts.com, Your Trusted Audi Parts Source
    Facebook: Like Us on Facebook
    Instagram: Follow Us on Instagram




  2. #2
    Veteran Member Four Rings B72.0T's Avatar
    Join Date
    Dec 18 2009
    AZ Member #
    52244
    My Garage
    2015 Q7 TDI S-Line Prestige, B8 S4 6MT
    Location
    Pennsylvania


    .
    .

  3. #3
    Stage 2 Banner Advertiser Four Rings Hugh@EuropaParts's Avatar
    Join Date
    Aug 22 2010
    AZ Member #
    63043
    Location
    Piscataway, NJ

    Hugh
    EuropaParts.com, Your Trusted Audi Parts Source
    Facebook: Like Us on Facebook
    Instagram: Follow Us on Instagram




  4. #4
    Registered User Three Rings Jeff@RevoUSA's Avatar
    Join Date
    Nov 03 2009
    AZ Member #
    50168
    My Garage
    Husky SM610 | Supra Launch 21v | Stumpy FSR 29'er | KTM 450 SX-F FE | <Sighs> B8 A4 2.0
    Location
    Summit Point

    ....

  5. #5
    Stage 2 Banner Advertiser Four Rings Hugh@EuropaParts's Avatar
    Join Date
    Aug 22 2010
    AZ Member #
    63043
    Location
    Piscataway, NJ

    Hugh
    EuropaParts.com, Your Trusted Audi Parts Source
    Facebook: Like Us on Facebook
    Instagram: Follow Us on Instagram




Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.