Originally Posted by
slowww328
I take it this is an S4? What year?
Meaning you have an extra steel washer on top of the stack that is 3.16mm? Maybe there is one and I just didn't remove it from the diff. Either way, so long as the teflon/bronze washers are both 1.96mm (or close to that) then you shouldn't have any problems replacing them. As long as there's less than 0.20mm of total wiggle room in the stack, you're within Torsen's specifications. Can you reply with their thicknesses?
Hi,
Yes,S4 1998 years
Thickness from the top:
3,16 steel
1,96 steel teflon
3,20 steel
gear
1,53 steel
1,96 steel teflon
1,54 steel
gear
4,73 steel
1,96 steel (darker and slotted)
4,73 steel
They are measures approx mm
Reply With Quote
Bookmarks