Update: i started to use my multimeter and i followed what this said http://www.audicrazy.com/repair/Audi_ECU_J271.pdf I found out that i don't have 12volts to pin 4 on the relay harness. It barely registers anything. Everything else came out fine. I'm going to mess with it a little more while my son is still sleeping lol.
Edit: I made a mistake. It should read 12v when you apply the ground wire to it. My battery is 12v but the reading is 11.6v so the white/black wire is acting as a ground as it should.
Edit2: I'm only getting .3v to pin one on the coilpack as well and that should be 12v.
Edit3: the power i get to fuse 29 is .8v. I'm trying to trace it back but in the schematics is goes to the relay plate and i'm not sure what that is. If it's the fuel pump relay i've already changed it.
Reply With Quote
Bookmarks