Audizine - An Automotive Enthusiast Community

Results 1 to 19 of 19
  1. 04-08-2011 01:05 PM #1
    czsrock1990
    czsrock1990 is offline
    Senior Member Two Rings czsrock1990's Avatar
    Join Date
    Apr 20 2010
    AZ Member #
    57911
    My Garage
    2001.5 Stg3 B5 S4, 2001 B5 S4
    Location
    Chicopee Ma

    Just bought brembos few questions

    Guest-only advertisement. Register or Log In now!
    I just bought a set of four piston brembo calipers now I know in order to get them to fit on the b6 s rotors I have to get a bracket made, but I would rather just buy brembo rotors and put them on, is there a specific size/model I have to buy? Also can I use my brake lines on these calipers? Any help is appreciated
    Reply With Quote Reply With Quote  
  2. 04-08-2011 01:47 PM #2
    wakerider137
    wakerider137 is offline
    Senior Member Two Rings wakerider137's Avatar
    Join Date
    May 28 2009
    AZ Member #
    43017
    Location
    San Jose

    What model of Brembos did you buy?
    Reply With Quote Reply With Quote  
  3. 04-08-2011 02:14 PM #3
    czsrock1990
    czsrock1990 is offline
    Senior Member Two Rings czsrock1990's Avatar
    Join Date
    Apr 20 2010
    AZ Member #
    57911
    My Garage
    2001.5 Stg3 B5 S4, 2001 B5 S4
    Location
    Chicopee Ma

    All i know is that their 4 piston and they fit the s4 :X but when they arrive on monday ill get more info, but im guessing the rotor that i need to buy varies on the model of the caliper correct?
    Reply With Quote Reply With Quote  
  4. 04-08-2011 03:22 PM #4
    Watercooledind
    Watercooledind is offline
    Registered User Three Rings Watercooledind's Avatar
    Join Date
    Apr 02 2011
    AZ Member #
    73338
    Location
    holland/MI

    Should have bought from us! We have the lowest price on brembo's at the moment!
    Reply With Quote Reply With Quote  
  5. 04-08-2011 03:24 PM #5
    czsrock1990
    czsrock1990 is offline
    Senior Member Two Rings czsrock1990's Avatar
    Join Date
    Apr 20 2010
    AZ Member #
    57911
    My Garage
    2001.5 Stg3 B5 S4, 2001 B5 S4
    Location
    Chicopee Ma

    well i bought them from a member ^^
    Reply With Quote Reply With Quote  
  6. 04-08-2011 03:27 PM #6
    Watercooledind
    Watercooledind is offline
    Registered User Three Rings Watercooledind's Avatar
    Join Date
    Apr 02 2011
    AZ Member #
    73338
    Location
    holland/MI

    Quote Originally Posted by czsrock1990 View Post
    well i bought them from a member ^^
    Oh, nevermind then!
    Reply With Quote Reply With Quote  
  7. 04-08-2011 03:28 PM #7
    czsrock1990
    czsrock1990 is offline
    Senior Member Two Rings czsrock1990's Avatar
    Join Date
    Apr 20 2010
    AZ Member #
    57911
    My Garage
    2001.5 Stg3 B5 S4, 2001 B5 S4
    Location
    Chicopee Ma

    you guys sell just brembo rotors?
    Reply With Quote Reply With Quote  
  8. 04-08-2011 03:35 PM #8
    Watercooledind
    Watercooledind is offline
    Registered User Three Rings Watercooledind's Avatar
    Join Date
    Apr 02 2011
    AZ Member #
    73338
    Location
    holland/MI

    Quote Originally Posted by czsrock1990 View Post
    you guys sell just brembo rotors?
    Everything Brembo has to offer!
    Reply With Quote Reply With Quote  
  9. 04-08-2011 03:37 PM #9
    czsrock1990
    czsrock1990 is offline
    Senior Member Two Rings czsrock1990's Avatar
    Join Date
    Apr 20 2010
    AZ Member #
    57911
    My Garage
    2001.5 Stg3 B5 S4, 2001 B5 S4
    Location
    Chicopee Ma

    ok i will prob be contacting u soon after i can find out what i need. Trying to find out what model they are
    Reply With Quote Reply With Quote  
  10. 04-08-2011 03:39 PM #10
    CDesign
    CDesign is offline
    Registered User Four Rings CDesign's Avatar
    Join Date
    Jun 10 2009
    AZ Member #
    43608
    Location
    West Coast

    http://www.hrpworld.com/index.cfm?tp...ction=category

    If you bought their gt bbk, then you will need 355x32 rotors + hats + hardware, and you will want to replace your oe brake lines with some ss lines. You are likely going to spend more than $1000 for all those parts.
    Reply With Quote Reply With Quote  
  12. 04-08-2011 03:39 PM #11
    Watercooledind
    Watercooledind is offline
    Registered User Three Rings Watercooledind's Avatar
    Join Date
    Apr 02 2011
    AZ Member #
    73338
    Location
    holland/MI

    Quote Originally Posted by czsrock1990 View Post
    ok i will prob be contacting u soon after i can find out what i need. Trying to find out what model they are
    Don't know what size the rotor is?
    Reply With Quote Reply With Quote  
  13. 04-08-2011 03:42 PM #12
    czsrock1990
    czsrock1990 is offline
    Senior Member Two Rings czsrock1990's Avatar
    Join Date
    Apr 20 2010
    AZ Member #
    57911
    My Garage
    2001.5 Stg3 B5 S4, 2001 B5 S4
    Location
    Chicopee Ma

    cd, well looks like ill get a bracket made. lol
    Reply With Quote Reply With Quote  
  14. 04-08-2011 05:09 PM #13
    dparm
    dparm is offline
    Veteran Member Four Rings dparm's Avatar
    Join Date
    Apr 24 2009
    AZ Member #
    41628
    Location
    Frisco, TX

    So you just bought a random pair of Brembos?
    now: 2021 Mercedes AMG C63 S, 2017 Chevrolet Corvette Grand Sport
    past: 2005 Audi S4, 2011 Audi S4
    Reply With Quote Reply With Quote  
  15. 04-08-2011 05:14 PM #14
    noznab
    noznab is offline
    Veteran Member Three Rings noznab's Avatar
    Join Date
    Jul 08 2007
    AZ Member #
    19384
    Location
    Tri-State

    Quote Originally Posted by CDesign View Post
    http://www.hrpworld.com/index.cfm?tp...ction=category

    If you bought their gt bbk, then you will need 355x32 rotors + hats + hardware, and you will want to replace your oe brake lines with some ss lines. You are likely going to spend more than $1000 for all those parts.
    The GT kit with 355mm rotors has a 6 pot caliper. I believe the 4 pot is 328mm, although I'm not positive
    A few mods here and there
    Reply With Quote Reply With Quote  
  16. 04-08-2011 06:58 PM #15
    CDesign
    CDesign is offline
    Registered User Four Rings CDesign's Avatar
    Join Date
    Jun 10 2009
    AZ Member #
    43608
    Location
    West Coast

    They have 2 kits - 1 4pot 355, and the other one is 6pot 355. 328x28 is the rear kit for try b5.
    Reply With Quote Reply With Quote  
  17. 04-10-2011 09:45 AM #16
    czsrock1990
    czsrock1990 is offline
    Senior Member Two Rings czsrock1990's Avatar
    Join Date
    Apr 20 2010
    AZ Member #
    57911
    My Garage
    2001.5 Stg3 B5 S4, 2001 B5 S4
    Location
    Chicopee Ma

    yeah they come in tomorrow, i know that they are four pot for sure
    Reply With Quote Reply With Quote  
  18. 04-11-2011 05:46 PM #17
    czsrock1990
    czsrock1990 is offline
    Senior Member Two Rings czsrock1990's Avatar
    Join Date
    Apr 20 2010
    AZ Member #
    57911
    My Garage
    2001.5 Stg3 B5 S4, 2001 B5 S4
    Location
    Chicopee Ma

    so i got my brakes in today and i have been doing a little searching about making a bracket so my brakes can fit the stock s4 rotor (i believe i have the 4 pot 355mm, as it would make sense because the guy before me had them bracketed onto stock s4 rotors which i read are 345, havent had a chance to really examine them yet) but i saw this thread on audi forums http://www.audiforums.com/forum/showthread.php?t=103877 which shows The Russian making a bracket for his 944's. (pm'd him to see if he could help) I am wondering if there is anyone out there with specs so i could take them to a machine shop to get the bracket made so mine can fit the stock rotors. (Just not willing to spend 400 a rotor from brembo right now.)

    EDIT: I am also assuming i could do these measruments myself, but was just wondering if someone has already done this process.
    Reply With Quote Reply With Quote  
  19. 04-11-2011 08:27 PM #18
    S4King
    S4King is offline
    Veteran Member Three Rings S4King's Avatar
    Join Date
    Aug 01 2009
    AZ Member #
    45791
    Location
    Houston, TX

    I have a set of the 355 6-pot Brembos. Dont know if the rotors are the same. Take a look in the Brembo website they should have specs there. Let me know if you find anything. I might be able to get some measurements for the brackets or get you a AutoCad render.
    Reply With Quote Reply With Quote  
  20. 04-11-2011 08:33 PM #19
    czsrock1990
    czsrock1990 is offline
    Senior Member Two Rings czsrock1990's Avatar
    Join Date
    Apr 20 2010
    AZ Member #
    57911
    My Garage
    2001.5 Stg3 B5 S4, 2001 B5 S4
    Location
    Chicopee Ma

    ok ill keep researching thanks a bunch!! ill pm you when i find the specs
    Reply With Quote Reply With Quote  
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules



    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.