B8 S4 Modified Wheels & Suspension Gallery Thread

**B5Dreaming** · 06-26-2020 05:32 PM

Originally Posted by Ecinka87

What wheels are these? Looks aggressive.

**Solo3** · 06-27-2020 03:37 AM

Just installed these Hartmann 19 x 8.5, et 25. I thought they'd stick out too far since I was told 30 might be the smallest offset, but they look good. Flush with the fender.IMG_20200623_200719.jpeg

Sent from my Audizine mobile app

**B7TitaniumA4** · 06-28-2020 04:38 PM

Finalized my fitment around my BBK.
Vorsteiner VFF-103 carbon graphite
19x9.5 et45 final et’s are front-32 rear-27
Factory suspension.

Sent from my iPhone using Tapatalk

**GoneQuantum** · 06-28-2020 04:44 PM

Originally Posted by B7TitaniumA4

Finalized my fitment around my BBK.
Vorsteiner VFF-103 carbon graphite
19x9.5 et45 final et’s are front-32 rear-27
Factory suspension.

Sent from my iPhone using Tapatalk

Looks great! Love the color of the brakes. Are you running 255s?

Sent from my HD1905 using Tapatalk

**B7TitaniumA4** · 06-29-2020 03:08 AM

Originally Posted by GoneQuantum

Looks great! Love the color of the brakes. Are you running 255s?

Sent from my HD1905 using Tapatalk

Thanks!
Yes 255’s 96w!
(I highly recommend these tires, “Achilles ATS Sport 2” for summer...soft, quiet, great wet and dry traction and cheap. I’ve had these on all of my wheels for the past 4 years. (3 sets of wheels for my A4 and now on my S4) My buddy runs them in mustangs. 306 for 4 in this size.

Sent from my iPhone using Tapatalk

**GoneQuantum** · 06-29-2020 05:03 AM

Originally Posted by B7TitaniumA4

Thanks!
Yes 255’s 96w!
(I highly recommend these tires, “Achilles ATS Sport 2” for summer...soft, quiet, great wet and dry traction and cheap. I’ve had these on all of my wheels for the past 4 years. (3 sets of wheels for my A4 and now on my S4) My buddy runs them in mustangs. 306 for 4 in this size.

Sent from my iPhone using Tapatalk

Good to know! I've got these same wheels coming in on Wednesday and will be swapping over the 255s from my peelers for now since they still have a good bit of tread left. Might go 265s for the next set and will consider the ones that you have. Seems like a great price.

Sent from my HD1905 using Tapatalk

**Felo** · 08-08-2020 07:08 AM

Fellas,

Just for sharing in case some of you are wondering about this configuration, I've just installed some new niche wheels with:

Front: 8.5 et34, 255/35r19
Rear: 9.5 et 35, 255/35r19
Suspension: H&R sport springs (1.5",1.5")
Tires: Maxis vs5

The gap in the front it's about 1 finger, and at the rear probably 2 fingers, rarely rubbing, almost never.

**mahhdd** · 11-17-2020 11:09 PM

Is it safe to say that 255/35R19, a drop of 1.5" and a rim between the sizes of 8.5" and 9.5" of width will yield no rubbing, no problems?

**simonh** · 11-18-2020 02:09 AM

IMG_0598.jpg

20mm drop on H&R sport springs, A6 speedlines and 245/35/19 tyres.

**mahhdd** · 11-18-2020 11:20 PM

Are the guys who went with CF10's running the Semi Concave or the Concave sets?

What finish is this set? Anyone know?

**mahhdd** · 11-25-2020 07:31 PM

I just went through 95 pages of wheels, and I didn't find the combination I'd like to put together in Sepang... I guess I'll be the first at a rim combination, at the risk of looking too plain.

**Blaque Diamond Wheels** · 12-01-2020 10:20 AM

Sharing our customer's love for the B8/B8.5 platform (Not an S4 just an A4 S-Line) and his wheel setup with our 19" BD-3 Wheels in Matte-Graphite finish

Just click on the images to see this project's full gallery. Enjoy!

Just send us a PM or you may contact us through the following:
Phone: (818) 362-2300
E-Mail: [email protected]

Visit our website and check us out on Social Media:
Website: www.blaquediamond.com
IG: @BDWheels
FB: /BlaqueDiamondWheels

**Low Flyer** · 12-01-2020 12:33 PM

My girl...

Sent from my iPhone using Tapatalk

**sfourings** · 12-01-2020 03:33 PM

Originally Posted by moyzes

Wheels: S5 Rotors - 19x9ET33
Tires - PSS - 255-35-19
Suspension: KWV3
Rubbing: zero

Looks great! I’m running the same wheels / tire size but KW HAS springs. I rub on the fender liner. Any modifications on the fender? Seems like we’re close in terms of height.

Sent from my iPhone using Tapatalk

**mahhdd** · 04-05-2021 02:04 PM

Originally Posted by Turboaudi01

No admittance please. .

Sent from my SAMSUNG-SM-G890A using Tapatalk

This guy's build is who I'm going to try and mimic. Love this setup. His sig says VMR 710's 35et 255/30/zr20 Sumitomo on H&R Sport Springs

I've never considered 20's... Would a 20x9 setup create any rubbing issues when running H&R sport or 034 Dynamic+ springs?

If I make a concession, should I make a concession on the width of the tire (to go 20x8.5) or the diameter (going to 19's)? I wanted to leave room for a 265 tire if I wanted it (had plans to go Dual Pulley)

I also don't know if the tire selection is more limited on 20's.... It seems that 80% of the wheels in here are 19's.

**BillyS4** · 04-07-2021 06:27 PM

**Kokos** · 04-09-2021 12:47 AM

Hello, what do you do with the error of the magnetic ride suspension after replacing it with another suspension? is it necessary to buy kw adapters or can vcds do this?

**jm121189** · 04-12-2021 06:37 AM

Stock black optics. Powder coated Highland Bronze

**S4USX** · 04-21-2021 02:08 AM

Wheels: Q5 Peelers - 20” 8.5J ET33
Rubber: 245-30-R20
Suspension: H&R 40mm 29059-2
Rubbing: Zero

https://i.postimg.cc/d3knTzkt/30-A5-...-A375-A1-D.jpg
https://i.postimg.cc/zBfxqLqh/30-C40...-D1904-FE2.jpg
https://i.postimg.cc/V6HDvYNV/594-AC...57859-D2-E.jpg
https://i.postimg.cc/W4T9fWKX/CEDD8-...B93-E02-C1.jpg

Sent from my iPhone using Audizine Forum

**SnsterS4** · 04-22-2021 07:10 AM

Originally Posted by Jimcoily

20x10 et45 with 265/30/20

Sent from my LGLS992 using Tapatalk

Any issues with rubbing? What is the suspension set up?

Sent from my SM-G965U using Tapatalk

**Jimcoily** · 04-22-2021 08:06 AM

No rubbing. Im on Bilstein B16 coilovers, ride height is 26 inches at the 4 corners.

Originally Posted by SnsterS4

Any issues with rubbing? What is the suspension set up?

Sent from my SM-G965U using Tapatalk

**Rodizzle** · 04-22-2021 09:16 AM

19x9.5 2PC BC Forged HCA381 +38
Toyo R888R 265/35s
KW V3 w/ 034 Adj. uppers
Alignment specs:
Fronts : -2.2 / -.05toe
Rears: -2.1 / +.05toe

Sent from my iPhone using Tapatalk

**SnsterS4** · 04-22-2021 09:43 AM

Originally Posted by Jimcoily

No rubbing. Im on Bilstein B16 coilovers, ride height is 26 inches at the 4 corners.

Obviously being on coils, the ride is a bit stiffer. How rough is it compared to stock? Dumb question and lacks context, but still. Lol

Sent from my SM-G965U using Tapatalk

**Jimcoily** · 04-23-2021 11:16 AM

Not a dumb question. It is stiffer than stock but still very comfortable. Im not sure how to put it in words, stiffer ride but driving over bumps its smother. The ride doesn't beat you up