MKV ECS/ZiZa Projector Fog Light Conversion Kit???? hmm

[IVRINGS]

Has anyone looked into trying to check the size of these bad boys to maybe get to use these. Not sure if we could cut up our stock ones and these to make them work. Would clean the housing up a lot. Someone want to be first?

http://www.ecstuning.com/ES240971/?utm_source=Facebook

[itsmatt33]

ohhh man seems like a great idea. i just might bet he first to try this out.
are the plugs the same?

[ilko]

I'd hit it!

[manhertm]

What's special about these fogs?

[itsmatt33]

the beam will be much nicer and crisper.

what bulb type i should have asked. the plug wont matter as long as it the same bulb type

[IVRINGS]

What's special about these fogs?

Projector Fog

[itsmatt33]

Projector Fog

this

[IVRINGS]

I was looking for fog lights bulbs and I think it is an H7 bulb

[IVRINGS]

this

;)

[itsmatt33]

i dont see any reason why these wouldnt work other then mounting placement but even that looks fine

[IVRINGS]

Well let us know cause I would like to update those when I get the engine done.

[DownhillA4]

Me like. Would like to see someone attempt it.

[EUROaleksey]

sOrta been done.. not the same fogs, but might give u an idea..

[AudiA4Turbo22]

They use 9006 bulbs and u need an adapter for the harness to work.


Look here:

http://forums.jettamkv.com/viewtopic.php?t=3152

[SKIDMRK]

looks like it could be a cleaner solution for a projector fog. i wonder about lens diameter though. the mkv fogs appear to be a larger lens.

here's what i did awhile back: http://www.audizine.com/forum/showth...?highlight=fog

[EUROaleksey]

^ THAT is awesome work..

[IVRINGS]

I just like the look of a stock like projector vs an aftermarket setup. I love your car SKIDMARK, but I think the fogs could look a little more OEM if you know what I'm tryin'g to say without being rude.

[SKIDMRK]

no worries. i get what you're saying. i'm in the same boat also, but wanted the lens further out so that no light is blocked by the housing itself so the full width of the beam would be useful. this was the only way i could see that happening.

[IVRINGS]

no worries. i get what you're saying. i'm in the same boat also, but wanted the lens further out so that no light is blocked by the housing itself so the full width of the beam would be useful. this was the only way i could see that happening.

I'm glad we are on the same page with something. I can't wait for the summer so I can get my car painted since I have the same exterior all set to go on. When I saw we both have the DTM sides in that one car show post I was glad to see how great they looked.